我們之前所寫的方法，發現只能在QT編譯模式下解決這個問題，而在指令行模式下不能編譯通過，因為QT模式基于cmake，而make all基于Makefile
因而我們參照DeepLab的Makefile文件：
發現只要將其中關于matio的內容加到我們的對應文件中就能解決問題。
https://bitbucket.org/aquariusjay/deeplab-public-ver2/src/071ef5a59aad8d9e6e1f5b8dff3d7a5c984a3d3a/Makefile?at=master&fileviewer=file-view-default
PROJECT := caffe
CONFIG_FILE := Makefile.config
# Explicitly check for the config file, otherwise make -k will proceed anyway.
ifeq ($(wildcard $(CONFIG_FILE)),)
$(error $(
CONFIG_FILE) not found. See $(CONFIG_FILE).example.)
endif
include $(CONFIG_FILE)
BUILD_DIR_LINK := $(BUILD_DIR
)
ifeq ($(RELEASE_BUILD_DIR),)
RELEASE_BUILD_DIR :
= .
$(BUILD_DIR
)_release
endif
ifeq ($(DEBUG_BUILD_DIR),)
DEBUG_BUILD_DIR :
= .
$(BUILD_DIR
)_debug
endif
DEBUG ?= 0
ifeq ($(DEBUG), 1)
BUILD_DIR :
= $(DEBUG_BUILD_DIR
)
OTHER_BUILD_DIR :
= $(RELEASE_BUILD_DIR
)
else
BUILD_DIR :
= $(RELEASE_BUILD_DIR
)
OTHER_BUILD_DIR :
= $(DEBUG_BUILD_DIR
)
endif
# All of the directories containing code.
SRC_DIRS := $(shell find * -type d -exec bash -c
"find {} -maxdepth 1 \
\( -name
'*.cpp' -o -name
'*.proto' \) | grep -q .
" \; -print)
# The target shared library name
LIBRARY_NAME := $(PROJECT
)
LIB_BUILD_DIR := $(BUILD_DIR
)/lib
STATIC_NAME := $(LIB_BUILD_DIR
)/lib
$(LIBRARY_NAME
).a
DYNAMIC_VERSION_MAJOR := 1
DYNAMIC_VERSION_MINOR := 0
DYNAMIC_VERSION_REVISION := 0-rc3
DYNAMIC_NAME_SHORT := lib
$(LIBRARY_NAME
).so
#DYNAMIC_SONAME_SHORT := $(DYNAMIC_NAME_SHORT).$(DYNAMIC_VERSION_MAJOR)
DYNAMIC_VERSIONED_NAME_SHORT := $(DYNAMIC_NAME_SHORT
).
$(DYNAMIC_VERSION_MAJOR
).
$(DYNAMIC_VERSION_MINOR
).
$(DYNAMIC_VERSION_REVISION
)
DYNAMIC_NAME := $(LIB_BUILD_DIR
)/
$(DYNAMIC_VERSIONED_NAME_SHORT
)
COMMON_FLAGS += -DCAFFE_VERSION
=$(DYNAMIC_VERSION_MAJOR
).
$(DYNAMIC_VERSION_MINOR
).
$(DYNAMIC_VERSION_REVISION
)
##############################
# Get all source files
##############################
# CXX_SRCS are the source files excluding the test ones.
CXX_SRCS := $(shell find src/
$(PROJECT
) ! -name
"test_*.cpp" -name
"*.cpp")
# CU_SRCS are the cuda source files
CU_SRCS := $(shell find src/
$(PROJECT
) ! -name
"test_*.cu" -name
"*.cu")
# TEST_SRCS are the test source files
TEST_MAIN_SRC := src/
$(PROJECT
)/test/test_caffe_main.cpp
TEST_SRCS := $(shell find src/
$(PROJECT
) -name
"test_*.cpp")
TEST_SRCS := $(filter-out
$(TEST_MAIN_SRC
),
$(TEST_SRCS
))
TEST_CU_SRCS := $(shell find src/
$(PROJECT
) -name
"test_*.cu")
GTEST_SRC := src/gtest/gtest-all.cpp
# TOOL_SRCS are the source files for the tool binaries
TOOL_SRCS := $(shell find tools -name
"*.cpp")
# EXAMPLE_SRCS are the source files for the example binaries
EXAMPLE_SRCS := $(shell find examples -name
"*.cpp")
# BUILD_INCLUDE_DIR contains any generated header files we want to include.
BUILD_INCLUDE_DIR := $(BUILD_DIR
)/src
# PROTO_SRCS are the protocol buffer definitions
PROTO_SRC_DIR := src/
$(PROJECT
)/proto
PROTO_SRCS := $(wildcard
$(PROTO_SRC_DIR
)/*.proto
)
# PROTO_BUILD_DIR will contain the .cc and obj files generated from
# PROTO_SRCS; PROTO_BUILD_INCLUDE_DIR will contain the .h header files
PROTO_BUILD_DIR := $(BUILD_DIR
)/
$(PROTO_SRC_DIR
)
PROTO_BUILD_INCLUDE_DIR := $(BUILD_INCLUDE_DIR
)/
$(PROJECT
)/proto
# NONGEN_CXX_SRCS includes all source/header files except those generated
# automatically (e.g., by proto).
NONGEN_CXX_SRCS := $(shell find
\
src/
$(PROJECT
) \
include/
$(PROJECT
) \
python/
$(PROJECT
) \
matlab/+
$(PROJECT
)/private
\
examples
\
tools
\
-name
"*.cpp" -or -name
"*.hpp" -or -name
"*.cu" -or -name
"*.cuh")
LINT_SCRIPT := scripts/cpp_lint.py
LINT_OUTPUT_DIR := $(BUILD_DIR
)/.lint
LINT_EXT := lint.txt
LINT_OUTPUTS := $(addsuffix .
$(LINT_EXT
),
$(addprefix
$(LINT_OUTPUT_DIR
)/,
$(NONGEN_CXX_SRCS
)))
EMPTY_LINT_REPORT := $(BUILD_DIR
)/.
$(LINT_EXT
)
NONEMPTY_LINT_REPORT := $(BUILD_DIR
)/
$(LINT_EXT
)
# PY$(PROJECT)_SRC is the python wrapper for $(PROJECT)
PY$(PROJECT)_SRC :=
python/
$(PROJECT)/
_$(PROJECT).
cpp
PY$(PROJECT)_SO :=
python/
$(PROJECT)/
_$(PROJECT).
so
PY$(PROJECT)_HXX :=
include/
$(PROJECT)/
layers/
python_layer.
hpp
# MAT$(PROJECT)_SRC is the mex entrance point of matlab package for $(PROJECT)
MAT$(PROJECT)_SRC :=
matlab/+
$(PROJECT)/
private/
$(PROJECT)_.
cpp
ifneq ($(MATLAB_DIR),)
MAT_SO_EXT :
= $(shell
$(MATLAB_DIR
)/bin/mexext
)
endif
MAT$(PROJECT)_SO :=
matlab/+
$(PROJECT)/
private/
$(PROJECT)_.
$(MAT_SO_EXT)
##############################
# Derive generated files
##############################
# The generated files for protocol buffers
PROTO_GEN_HEADER_SRCS := $(addprefix
$(PROTO_BUILD_DIR
)/,
\
$(notdir
${PROTO_SRCS:.proto=.pb.h}))
PROTO_GEN_HEADER := $(addprefix
$(PROTO_BUILD_INCLUDE_DIR
)/,
\
$(notdir
${PROTO_SRCS:.proto=.pb.h}))
PROTO_GEN_CC := $(addprefix
$(BUILD_DIR
)/,
${PROTO_SRCS:.proto=.pb.cc})
PY_PROTO_BUILD_DIR := python/
$(PROJECT
)/proto
PY_PROTO_INIT := python/
$(PROJECT
)/proto/__init__.py
PROTO_GEN_PY := $(foreach file,
${PROTO_SRCS:.proto=_pb2.py},
\
$(PY_PROTO_BUILD_DIR
)/
$(notdir
$(file
)))
# The objects corresponding to the source files
# These objects will be linked into the final shared library, so we
# exclude the tool, example, and test objects.
CXX_OBJS := $(addprefix
$(BUILD_DIR
)/,
${CXX_SRCS:.cpp=.o})
CU_OBJS := $(addprefix
$(BUILD_DIR
)/cuda/,
${CU_SRCS:.cu=.o})
PROTO_OBJS := ${PROTO_GEN_CC:.cc=.o}
OBJS := $(PROTO_OBJS
) $(CXX_OBJS
) $(CU_OBJS
)
# tool, example, and test objects
TOOL_OBJS := $(addprefix
$(BUILD_DIR
)/,
${TOOL_SRCS:.cpp=.o})
TOOL_BUILD_DIR := $(BUILD_DIR
)/tools
TEST_CXX_BUILD_DIR := $(BUILD_DIR
)/src/
$(PROJECT
)/test
TEST_CU_BUILD_DIR := $(BUILD_DIR
)/cuda/src/
$(PROJECT
)/test
TEST_CXX_OBJS := $(addprefix
$(BUILD_DIR
)/,
${TEST_SRCS:.cpp=.o})
TEST_CU_OBJS := $(addprefix
$(BUILD_DIR
)/cuda/,
${TEST_CU_SRCS:.cu=.o})
TEST_OBJS := $(TEST_CXX_OBJS
) $(TEST_CU_OBJS
)
GTEST_OBJ := $(addprefix
$(BUILD_DIR
)/,
${GTEST_SRC:.cpp=.o})
EXAMPLE_OBJS := $(addprefix
$(BUILD_DIR
)/,
${EXAMPLE_SRCS:.cpp=.o})
# Output files for automatic dependency generation
DEPS := ${CXX_OBJS:.o=.d} ${CU_OBJS:.o=.d} ${TEST_CXX_OBJS:.o=.d} \
${TEST_CU_OBJS:.o=.d} $(BUILD_DIR
)/
${MAT$(PROJECT
)_SO:.$(MAT_SO_EXT
)=.d}
# tool, example, and test bins
TOOL_BINS := ${TOOL_OBJS:.o=.bin}
EXAMPLE_BINS := ${EXAMPLE_OBJS:.o=.bin}
# symlinks to tool bins without the ".bin" extension
TOOL_BIN_LINKS := ${TOOL_BINS:.bin=}
# Put the test binaries in build/test for convenience.
TEST_BIN_DIR := $(BUILD_DIR
)/test
TEST_CU_BINS := $(addsuffix .testbin,
$(addprefix
$(TEST_BIN_DIR
)/,
\
$(foreach obj,
$(TEST_CU_OBJS
),
$(basename
$(notdir
$(obj
))))))
TEST_CXX_BINS := $(addsuffix .testbin,
$(addprefix
$(TEST_BIN_DIR
)/,
\
$(foreach obj,
$(TEST_CXX_OBJS
),
$(basename
$(notdir
$(obj
))))))
TEST_BINS := $(TEST_CXX_BINS
) $(TEST_CU_BINS
)
# TEST_ALL_BIN is the test binary that links caffe dynamically.
TEST_ALL_BIN := $(TEST_BIN_DIR
)/test_all.testbin
##############################
# Derive compiler warning dump locations
##############################
WARNS_EXT := warnings.txt
CXX_WARNS := $(addprefix
$(BUILD_DIR
)/,
${CXX_SRCS:.cpp=.o.$(WARNS_EXT
)})
CU_WARNS := $(addprefix
$(BUILD_DIR
)/cuda/,
${CU_SRCS:.cu=.o.$(WARNS_EXT
)})
TOOL_WARNS := $(addprefix
$(BUILD_DIR
)/,
${TOOL_SRCS:.cpp=.o.$(WARNS_EXT
)})
EXAMPLE_WARNS := $(addprefix
$(BUILD_DIR
)/,
${EXAMPLE_SRCS:.cpp=.o.$(WARNS_EXT
)})
TEST_WARNS := $(addprefix
$(BUILD_DIR
)/,
${TEST_SRCS:.cpp=.o.$(WARNS_EXT
)})
TEST_CU_WARNS := $(addprefix
$(BUILD_DIR
)/cuda/,
${TEST_CU_SRCS:.cu=.o.$(WARNS_EXT
)})
ALL_CXX_WARNS := $(CXX_WARNS
) $(TOOL_WARNS
) $(EXAMPLE_WARNS
) $(TEST_WARNS
)
ALL_CU_WARNS := $(CU_WARNS
) $(TEST_CU_WARNS
)
ALL_WARNS := $(ALL_CXX_WARNS
) $(ALL_CU_WARNS
)
EMPTY_WARN_REPORT := $(BUILD_DIR
)/.
$(WARNS_EXT
)
NONEMPTY_WARN_REPORT := $(BUILD_DIR
)/
$(WARNS_EXT
)
##############################
# Derive include and lib directories
##############################
CUDA_INCLUDE_DIR := $(CUDA_DIR
)/include
CUDA_LIB_DIR :=
# add <cuda>/lib64 only if it exists
ifneq ("$(wildcard $(CUDA_DIR)/lib64)","")
CUDA_LIB_DIR +
= $(CUDA_DIR
)/lib64
endif
CUDA_LIB_DIR += $(CUDA_DIR
)/lib
INCLUDE_DIRS += $(BUILD_INCLUDE_DIR
) ./src ./include
ifneq ($(CPU_ONLY), 1)
INCLUDE_DIRS +
= $(CUDA_INCLUDE_DIR
)
LIBRARY_DIRS +
= $(CUDA_LIB_DIR
)
LIBRARIES :
= cudart cublas curand
endif
LIBRARIES += glog gflags protobuf boost_system boost_filesystem m hdf5_hl hdf5
# handle IO dependencies
USE_LEVELDB ?= 1
USE_LMDB ?= 1
USE_OPENCV ?= 1
USE_MATIO ?= 1
ifeq ($(USE_LEVELDB), 1)
LIBRARIES +
= leveldb snappy
endif
ifeq ($(USE_LMDB), 1)
LIBRARIES +
= lmdb
endif
ifeq ($(USE_OPENCV), 1)
LIBRARIES +
= opencv_core opencv_highgui opencv_imgproc
ifeq ($(OPENCV_VERSION), 3)
LIBRARIES +
= opencv_imgcodecs
endif
endif
ifeq ($(USE_MATIO), 1)
LIBRARIES +
= matio
endif
PYTHON_LIBRARIES ?= boost_python python2.7
WARNINGS := -Wall -Wno-sign-compare
##############################
# Set build directories
##############################
DISTRIBUTE_DIR ?= distribute
DISTRIBUTE_SUBDIRS := $(DISTRIBUTE_DIR
)/bin
$(DISTRIBUTE_DIR
)/lib
DIST_ALIASES := dist
ifneq ($(strip $(DISTRIBUTE_DIR)),distribute)
DIST_ALIASES +
= distribute
endif
ALL_BUILD_DIRS := $(sort
$(BUILD_DIR
) $(addprefix
$(BUILD_DIR
)/,
$(SRC_DIRS
)) \
$(addprefix
$(BUILD_DIR
)/cuda/,
$(SRC_DIRS
)) \
$(LIB_BUILD_DIR
) $(TEST_BIN_DIR
) $(PY_PROTO_BUILD_DIR
) $(LINT_OUTPUT_DIR
) \
$(DISTRIBUTE_SUBDIRS
) $(PROTO_BUILD_INCLUDE_DIR
))
##############################
# Set directory for Doxygen-generated documentation
##############################
DOXYGEN_CONFIG_FILE ?= ./.Doxyfile
# should be the same as OUTPUT_DIRECTORY in the .Doxyfile
DOXYGEN_OUTPUT_DIR ?= ./doxygen
DOXYGEN_COMMAND ?= doxygen
# All the files that might have Doxygen documentation.
DOXYGEN_SOURCES := $(shell find
\
src/
$(PROJECT
) \
include/
$(PROJECT
) \
python/
\
matlab/
\
examples
\
tools
\
-name
"*.cpp" -or -name
"*.hpp" -or -name
"*.cu" -or -name
"*.cuh" -or
\
-name
"*.py" -or -name
"*.m")
DOXYGEN_SOURCES += $(DOXYGEN_CONFIG_FILE
)
##############################
# Configure build
##############################
# Determine platform
UNAME := $(shell uname -s
)
ifeq ($(UNAME), Linux)
LINUX :
= 1
else ifeq ($(UNAME), Darwin)
OSX :
= 1
OSX_MAJOR_VERSION :
= $(shell sw_vers -productVersion
| cut -f
1 -d .
)
OSX_MINOR_VERSION :
= $(shell sw_vers -productVersion
| cut -f
2 -d .
)
endif
# Linux
ifeq ($(LINUX), 1)
CXX ?
= /usr/bin/g++
GCCVERSION :
= $(shell
$(CXX
) -dumpversion
| cut -f1,2 -d.
)
# older versions of gcc are too dumb to build boost with -Wuninitalized
ifeq ($(shell echo | awk '{exit $(GCCVERSION) < 4.6;}'), 1)
WARNINGS +
= -Wno-uninitialized
endif
# boost::thread is reasonably called boost_thread (compare OS X)
# We will also explicitly add stdc++ to the link target.
LIBRARIES +
= boost_thread stdc++
VERSIONFLAGS +
= -Wl,-soname,
$(DYNAMIC_VERSIONED_NAME_SHORT
) -Wl,-rpath,
$(ORIGIN
)/../lib
endif
# OS X:
# clang++ instead of g++
# libstdc++ for NVCC compatibility on OS X >= 10.9 with CUDA < 7.0
ifeq ($(OSX), 1)
CXX :
= /usr/bin/clang++
ifneq ($(CPU_ONLY), 1)
CUDA_VERSION :
= $(shell
$(CUDA_DIR
)/bin/nvcc -V
| grep -o
'release \d' | grep -o
'\d')
ifeq ($(shell echo | awk '{exit $(CUDA_VERSION) < 7.0;}'), 1)
CXXFLAGS +
= -stdlib
=libstdc++
LINKFLAGS +
= -stdlib
=libstdc++
endif
# clang throws this warning for cuda headers
WARNINGS +
= -Wno-unneeded-internal-declaration
# 10.11 strips DYLD_* env vars so link CUDA (rpath is available on 10.5+)
OSX_10_OR_LATER :
= $(shell
[ $(OSX_MAJOR_VERSION
) -ge
10 ] && echo true)
OSX_10_5_OR_LATER :
= $(shell
[ $(OSX_MINOR_VERSION
) -ge
5 ] && echo true)
ifeq ($(OSX_10_OR_LATER),true)
ifeq ($(OSX_10_5_OR_LATER),true)
LDFLAGS +
= -Wl,-rpath,
$(CUDA_LIB_DIR
)
endif
endif
endif
# gtest needs to use its own tuple to not conflict with clang
COMMON_FLAGS +
= -DGTEST_USE_OWN_TR1_TUPLE
=1
# boost::thread is called boost_thread-mt to mark multithreading on OS X
LIBRARIES +
= boost_thread-mt
# we need to explicitly ask for the rpath to be obeyed
ORIGIN :
= @loader_path
VERSIONFLAGS +
= -Wl,-install_name,@rpath/
$(DYNAMIC_VERSIONED_NAME_SHORT
) -Wl,-rpath,
$(ORIGIN
)/../../build/lib
else
ORIGIN :
= \$$ORIGIN
endif
# Custom compiler
ifdef CUSTOM_CXX
CXX :
= $(CUSTOM_CXX
)
endif
# Static linking
ifneq (,$(findstring clang++,$(CXX)))
STATIC_LINK_COMMAND :
= -Wl,-force_load
$(STATIC_NAME
)
else ifneq (,$(findstring g++,$(CXX)))
STATIC_LINK_COMMAND :
= -Wl,--whole-archive
$(STATIC_NAME
) -Wl,--no-whole-archive
else
# The following line must not be indented with a tab, since we are not inside a target
$(error Cannot static link with the
$(CXX
) compiler
)
endif
# Debugging
ifeq ($(DEBUG), 1)
COMMON_FLAGS +
= -DDEBUG -g -O0
NVCCFLAGS +
= -G
else
COMMON_FLAGS +
= -DNDEBUG -O2
endif
# cuDNN acceleration configuration.
ifeq ($(USE_CUDNN), 1)
LIBRARIES +
= cudnn
COMMON_FLAGS +
= -DUSE_CUDNN
endif
# configure IO libraries
ifeq ($(USE_OPENCV), 1)
COMMON_FLAGS +
= -DUSE_OPENCV
endif
ifeq ($(USE_LEVELDB), 1)
COMMON_FLAGS +
= -DUSE_LEVELDB
endif
ifeq ($(USE_LMDB), 1)
COMMON_FLAGS +
= -DUSE_LMDB
ifeq ($(ALLOW_LMDB_NOLOCK), 1)
COMMON_FLAGS +
= -DALLOW_LMDB_NOLOCK
endif
endif
# CPU-only configuration
ifeq ($(CPU_ONLY), 1)
OBJS :
= $(PROTO_OBJS
) $(CXX_OBJS
)
TEST_OBJS :
= $(TEST_CXX_OBJS
)
TEST_BINS :
= $(TEST_CXX_BINS
)
ALL_WARNS :
= $(ALL_CXX_WARNS
)
TEST_FILTER :
= --gtest_filter
="-*GPU*"
COMMON_FLAGS +
= -DCPU_ONLY
endif
# Python layer support
ifeq ($(WITH_PYTHON_LAYER), 1)
COMMON_FLAGS +
= -DWITH_PYTHON_LAYER
LIBRARIES +
= $(PYTHON_LIBRARIES
)
endif
# BLAS configuration (default = ATLAS)
BLAS ?= atlas
ifeq ($(BLAS), mkl)
# MKL
LIBRARIES +
= mkl_rt
COMMON_FLAGS +
= -DUSE_MKL
MKL_DIR ?
= /opt/intel/mkl
BLAS_INCLUDE ?
= $(MKL_DIR
)/include
BLAS_LIB ?
= $(MKL_DIR
)/lib
$(MKL_DIR
)/lib/intel64
else ifeq ($(BLAS), open)
# OpenBLAS
LIBRARIES +
= openblas
else
# ATLAS
ifeq ($(LINUX), 1)
ifeq ($(BLAS), atlas)
# Linux simply has cblas and atlas
LIBRARIES +
= cblas atlas
endif
else ifeq ($(OSX), 1)
# OS X packages atlas as the vecLib framework
LIBRARIES +
= cblas
# 10.10 has accelerate while 10.9 has veclib
XCODE_CLT_VER :
= $(shell pkgutil --pkg-info
=com.apple.pkg.CLTools_Executables
| grep
'version' | sed
's/[^0-9]*\([0-9]\).*/\1/')
XCODE_CLT_GEQ_6 :
= $(shell
[ $(XCODE_CLT_VER
) -gt
5 ] && echo 1
)
ifeq ($(XCODE_CLT_GEQ_6), 1)
BLAS_INCLUDE ?
= /System/Library/Frameworks/Accelerate.framework/Versions/Current/Frameworks/vecLib.framework/Headers/
LDFLAGS +
= -framework Accelerate
else
BLAS_INCLUDE ?
= /System/Library/Frameworks/vecLib.framework/Versions/Current/Headers/
LDFLAGS +
= -framework vecLib
endif
endif
endif
INCLUDE_DIRS += $(BLAS_INCLUDE
)
LIBRARY_DIRS += $(BLAS_LIB
)
LIBRARY_DIRS += $(LIB_BUILD_DIR
)
# Automatic dependency generation (nvcc is handled separately)
CXXFLAGS += -MMD -MP
# Complete build flags.
COMMON_FLAGS += $(foreach includedir,
$(INCLUDE_DIRS
),-I
$(includedir
))
CXXFLAGS += -pthread -fPIC
$(COMMON_FLAGS
) $(WARNINGS
)
NVCCFLAGS += -ccbin
=$(CXX
) -Xcompiler -fPIC
$(COMMON_FLAGS
)
# mex may invoke an older gcc that is too liberal with -Wuninitalized
MATLAB_CXXFLAGS := $(CXXFLAGS
) -Wno-uninitialized
LINKFLAGS += -pthread -fPIC
$(COMMON_FLAGS
) $(WARNINGS
)
USE_PKG_CONFIG ?= 0
ifeq ($(USE_PKG_CONFIG), 1)
PKG_CONFIG :
= $(shell pkg-config opencv --libs
)
else
PKG_CONFIG :
=
endif
LDFLAGS += $(foreach librarydir,
$(LIBRARY_DIRS
),-L
$(librarydir
)) $(PKG_CONFIG
) \
$(foreach library,
$(LIBRARIES
),-l
$(library
))
PYTHON_LDFLAGS := $(LDFLAGS
) $(foreach library,
$(PYTHON_LIBRARIES
),-l
$(library
))
# 'superclean' target recursively* deletes all files ending with an extension
# in $(SUPERCLEAN_EXTS) below. This may be useful if you've built older
# versions of Caffe that do not place all generated files in a location known
# to the 'clean' target.
#
# 'supercleanlist' will list the files to be deleted by make superclean.
#
# * Recursive with the exception that symbolic links are never followed, per the
# default behavior of 'find'.
SUPERCLEAN_EXTS := .so .a .o .bin .testbin .pb.cc .pb.h _pb2.py .cuo
# Set the sub-targets of the 'everything' target.
EVERYTHING_TARGETS := all py
$(PROJECT
) test warn lint
# Only build matcaffe as part of "everything" if MATLAB_DIR is specified.
ifneq ($(MATLAB_DIR),)
EVERYTHING_TARGETS +
= mat
$(PROJECT
)
endif
##############################
# Define build targets
##############################
.PHONY: all lib test clean docs linecount lint lintclean tools examples $(DIST_ALIASES) \
py mat py$(PROJECT) mat$(PROJECT) proto runtest \
superclean supercleanlist supercleanfiles warn everything
all: lib tools examples
lib: $(STATIC_NAME) $(DYNAMIC_NAME)
everything: $(EVERYTHING_TARGETS)
linecount:
cloc --read-lang-def
=$(PROJECT
).cloc
\
src/
$(PROJECT
) include/
$(PROJECT
) tools examples
\
python matlab
lint: $(EMPTY_LINT_REPORT)
lintclean:
@
$(RM
) -r
$(LINT_OUTPUT_DIR
) $(EMPTY_LINT_REPORT
) $(NONEMPTY_LINT_REPORT
)
docs: $(DOXYGEN_OUTPUT_DIR)
@
cd ./docs
; ln -sfn ../
$(DOXYGEN_OUTPUT_DIR
)/html doxygen
$(DOXYGEN_OUTPUT_DIR): $(DOXYGEN_CONFIG_FILE) $(DOXYGEN_SOURCES)
$(DOXYGEN_COMMAND
) $(DOXYGEN_CONFIG_FILE
)
$(EMPTY_LINT_REPORT): $(LINT_OUTPUTS) | $(BUILD_DIR)
@ cat
$(LINT_OUTPUTS
) >
$@
@
if [ -s
"$@" ]; then \
cat
$@; \
mv
$@ $(NONEMPTY_LINT_REPORT
); \
echo "Found one or more lint errors."; \
exit 1
; \
fi; \
$(RM
) $(NONEMPTY_LINT_REPORT
); \
echo "No lint errors!";
$(LINT_OUTPUTS): $(LINT_OUTPUT_DIR)/%.
lint.
txt : %
$(LINT_SCRIPT) | $(LINT_OUTPUT_DIR)
@ mkdir -p
$(dir
$@)
@ python
$(LINT_SCRIPT
) $< 2>
&1 \
| grep -v
"^Done processing " \
| grep -v
"^Total errors found: 0" \
>
$@ \
|| true
test: $(TEST_ALL_BIN) $(TEST_ALL_DYNLINK_BIN) $(TEST_BINS)
tools: $(TOOL_BINS) $(TOOL_BIN_LINKS)
examples: $(EXAMPLE_BINS)
py$(PROJECT): py
py: $(PY$(
PROJECT)_SO)
$(PROTO_GEN_PY)
$(PY$(PROJECT)_SO): $(PY$(
PROJECT)_SRC)
$(PY$(
PROJECT)_HXX)
| $(DYNAMIC_NAME)
@
echo CXX/LD -o
$@ $<
$(Q
)$(CXX
) -shared -o
$@ $(PY
$(PROJECT
)_SRC
) \
-o
$@ $(LINKFLAGS
) -l
$(LIBRARY_NAME
) $(PYTHON_LDFLAGS
) \
-Wl,-rpath,
$(ORIGIN
)/../../build/lib
mat$(PROJECT): mat
mat: $(MAT$(
PROJECT)_SO)
$(MAT$(PROJECT)_SO): $(MAT$(
PROJECT)_SRC)
$(STATIC_NAME)
@
if [ -z
"$(MATLAB_DIR
)" ]; then \
echo "MATLAB_DIR must be specified in $(CONFIG_FILE
)" \
"to build mat$(PROJECT
)."; \
exit 1
; \
fi
@
echo MEX $<
$(Q
)$(MATLAB_DIR
)/bin/mex
$(MAT
$(PROJECT
)_SRC
) \
CXX="$(CXX
)" \
CXXFLAGS="\$$CXXFLAGS $(MATLAB_CXXFLAGS
)" \
CXXLIBS="\$$CXXLIBS $(STATIC_LINK_COMMAND
) $(LDFLAGS
)" -output
$@
@
if [ -f
"$(PROJECT
)_.d" ]; then \
mv -f
$(PROJECT
)_.d
$(BUILD_DIR
)/
${MAT$(PROJECT
)_SO:.$(MAT_SO_EXT
)=.d}; \
fi
runtest: $(TEST_ALL_BIN)
$(TOOL_BUILD_DIR
)/caffe
$(TEST_ALL_BIN
) $(TEST_GPUID
) --gtest_shuffle
$(TEST_FILTER
)
pytest: py
cd python
; python -m unittest discover -s caffe/test
mattest: mat
cd matlab
; $(MATLAB_DIR
)/bin/matlab -nodisplay -r
'caffe.run_tests(), exit()'
warn: $(EMPTY_WARN_REPORT)
$(EMPTY_WARN_REPORT): $(ALL_WARNS) | $(BUILD_DIR)
@ cat
$(ALL_WARNS
) >
$@
@
if [ -s
"$@" ]; then \
cat
$@; \
mv
$@ $(NONEMPTY_WARN_REPORT
); \
echo "Compiler produced one or more warnings."; \
exit 1
; \
fi; \
$(RM
) $(NONEMPTY_WARN_REPORT
); \
echo "No compiler warnings!";
$(ALL_WARNS): %.
o.
$(WARNS_EXT) : %.
o
$(BUILD_DIR_LINK): $(BUILD_DIR)/.
linked
# Create a target ".linked" in this BUILD_DIR to tell Make that the "build" link
# is currently correct, then delete the one in the OTHER_BUILD_DIR in case it
# exists and $(DEBUG) is toggled later.
$(BUILD_DIR)/.linked:
@ mkdir -p
$(BUILD_DIR
)
@
$(RM
) $(OTHER_BUILD_DIR
)/.linked
@
$(RM
) -r
$(BUILD_DIR_LINK
)
@ ln -s
$(BUILD_DIR
) $(BUILD_DIR_LINK
)
@ touch
$@
$(ALL_BUILD_DIRS): | $(BUILD_DIR_LINK)
@ mkdir -p
$@
$(DYNAMIC_NAME): $(OBJS) | $(LIB_BUILD_DIR)
@
echo LD -o
$@
$(Q
)$(CXX
) -shared -o
$@ $(OBJS
) $(VERSIONFLAGS
) $(LINKFLAGS
) $(LDFLAGS
)
@
cd $(BUILD_DIR
)/lib
; rm -f
$(DYNAMIC_NAME_SHORT
); ln -s
$(DYNAMIC_VERSIONED_NAME_SHORT
) $(DYNAMIC_NAME_SHORT
)
$(STATIC_NAME): $(OBJS) | $(LIB_BUILD_DIR)
@
echo AR -o
$@
$(Q
)ar rcs
$@ $(OBJS
)
$(BUILD_DIR)/%.o: %.
cpp | $(ALL_BUILD_DIRS)
@
echo CXX $<
$(Q
)$(CXX
) $<
$(CXXFLAGS
) -c -o
$@ 2>
$@.
$(WARNS_EXT
) \
|| (cat
$@.
$(WARNS_EXT
); exit 1
)
@ cat
$@.
$(WARNS_EXT
)
$(PROTO_BUILD_DIR)/%.pb.o: $(PROTO_BUILD_DIR)/%.
pb.
cc $(PROTO_GEN_HEADER) \
| $(PROTO_BUILD_DIR)
@
echo CXX $<
$(Q
)$(CXX
) $<
$(CXXFLAGS
) -c -o
$@ 2>
$@.
$(WARNS_EXT
) \
|| (cat
$@.
$(WARNS_EXT
); exit 1
)
@ cat
$@.
$(WARNS_EXT
)
$(BUILD_DIR)/cuda/%.o: %.
cu | $(ALL_BUILD_DIRS)
@
echo NVCC $<
$(Q
)$(CUDA_DIR
)/bin/nvcc
$(NVCCFLAGS
) $(CUDA_ARCH
) -M $< -o
${@:.o=.d} \
-odir
$(@D
)
$(Q
)$(CUDA_DIR
)/bin/nvcc
$(NVCCFLAGS
) $(CUDA_ARCH
) -c $< -o
$@ 2>
$@.
$(WARNS_EXT
) \
|| (cat
$@.
$(WARNS_EXT
); exit 1
)
@ cat
$@.
$(WARNS_EXT
)
$(TEST_ALL_BIN): $(TEST_MAIN_SRC) $(TEST_OBJS) $(GTEST_OBJ) \
| $(DYNAMIC_NAME) $(TEST_BIN_DIR)
@
echo CXX/LD -o
$@ $<
$(Q
)$(CXX
) $(TEST_MAIN_SRC
) $(TEST_OBJS
) $(GTEST_OBJ
) \
-o
$@ $(LINKFLAGS
) $(LDFLAGS
) -l
$(LIBRARY_NAME
) -Wl,-rpath,
$(ORIGIN
)/../lib
$(TEST_CU_BINS): $(TEST_BIN_DIR)/%.
testbin:
$(TEST_CU_BUILD_DIR)/%.
o \
$(GTEST_OBJ) | $(DYNAMIC_NAME) $(TEST_BIN_DIR)
@
echo LD $<
$(Q
)$(CXX
) $(TEST_MAIN_SRC
) $<
$(GTEST_OBJ
) \
-o
$@ $(LINKFLAGS
) $(LDFLAGS
) -l
$(LIBRARY_NAME
) -Wl,-rpath,
$(ORIGIN
)/../lib
$(TEST_CXX_BINS): $(TEST_BIN_DIR)/%.
testbin:
$(TEST_CXX_BUILD_DIR)/%.
o \
$(GTEST_OBJ) | $(DYNAMIC_NAME) $(TEST_BIN_DIR)
@
echo LD $<
$(Q
)$(CXX
) $(TEST_MAIN_SRC
) $<
$(GTEST_OBJ
) \
-o
$@ $(LINKFLAGS
) $(LDFLAGS
) -l
$(LIBRARY_NAME
) -Wl,-rpath,
$(ORIGIN
)/../lib
# Target for extension-less symlinks to tool binaries with extension '*.bin'.
$(TOOL_BUILD_DIR)/%: $(TOOL_BUILD_DIR)/%.
bin | $(TOOL_BUILD_DIR)
@
$(RM
) $@
@ ln -s
$(notdir $<
) $@
$(TOOL_BINS): %.
bin : %.
o | $(DYNAMIC_NAME)
@
echo CXX/LD -o
$@
$(Q
)$(CXX
) $< -o
$@ $(LINKFLAGS
) -l
$(LIBRARY_NAME
) $(LDFLAGS
) \
-Wl,-rpath,
$(ORIGIN
)/../lib
$(EXAMPLE_BINS): %.
bin : %.
o | $(DYNAMIC_NAME)
@
echo CXX/LD -o
$@
$(Q
)$(CXX
) $< -o
$@ $(LINKFLAGS
) -l
$(LIBRARY_NAME
) $(LDFLAGS
) \
-Wl,-rpath,
$(ORIGIN
)/../../lib
proto: $(PROTO_GEN_CC) $(PROTO_GEN_HEADER)
$(PROTO_BUILD_DIR)/%.pb.cc $(PROTO_BUILD_DIR)/%.pb.h : \
$(PROTO_SRC_DIR)/%.
proto | $(PROTO_BUILD_DIR)
@
echo PROTOC $<
$(Q
)protoc --proto_path
=$(PROTO_SRC_DIR
) --cpp_out
=$(PROTO_BUILD_DIR
) $<
$(PY_PROTO_BUILD_DIR)/%_pb2.py : $(PROTO_SRC_DIR)/%.
proto \
$(PY_PROTO_INIT) | $(PY_PROTO_BUILD_DIR)
@
echo PROTOC
\(python
\) $<
$(Q
)protoc --proto_path
=$(PROTO_SRC_DIR
) --python_out
=$(PY_PROTO_BUILD_DIR
) $<
$(PY_PROTO_INIT): | $(PY_PROTO_BUILD_DIR)
touch
$(PY_PROTO_INIT
)
clean:
@-
$(RM
) -rf
$(ALL_BUILD_DIRS
)
@-
$(RM
) -rf
$(OTHER_BUILD_DIR
)
@-
$(RM
) -rf
$(BUILD_DIR_LINK
)
@-
$(RM
) -rf
$(DISTRIBUTE_DIR
)
@-
$(RM
) $(PY
$(PROJECT
)_SO
)
@-
$(RM
) $(MAT
$(PROJECT
)_SO
)
supercleanfiles:
$(eval SUPERCLEAN_FILES :
= $(strip
\
$(foreach ext,
$(SUPERCLEAN_EXTS
),
$(shell find . -name
'*$(ext)' \
-not -path
'./data/*'))))
supercleanlist: supercleanfiles
@
\
if [ -z "$(SUPERCLEAN_FILES)" ]; then \
echo "No generated files found."; \
else \
echo $(SUPERCLEAN_FILES) | tr ' ' '\n'; \
fi
superclean: clean supercleanfiles
@
\
if [ -z "$(SUPERCLEAN_FILES)" ]; then \
echo "No generated files found."; \
else \
echo "Deleting the following generated files:"; \
echo $(SUPERCLEAN_FILES) | tr ' ' '\n'; \
$(RM) $(SUPERCLEAN_FILES); \
fi
$(DIST_ALIASES): $(DISTRIBUTE_DIR)
$(DISTRIBUTE_DIR): all py | $(DISTRIBUTE_SUBDIRS)
# add proto
cp -r src/caffe/proto
$(DISTRIBUTE_DIR
)/
# add include
cp -r include
$(DISTRIBUTE_DIR
)/
mkdir -p
$(DISTRIBUTE_DIR
)/include/caffe/proto
cp
$(PROTO_GEN_HEADER_SRCS
) $(DISTRIBUTE_DIR
)/include/caffe/proto
# add tool and example binaries
cp
$(TOOL_BINS
) $(DISTRIBUTE_DIR
)/bin
cp
$(EXAMPLE_BINS
) $(DISTRIBUTE_DIR
)/bin
# add libraries
cp
$(STATIC_NAME
) $(DISTRIBUTE_DIR
)/lib
install -m
644 $(DYNAMIC_NAME
) $(DISTRIBUTE_DIR
)/lib
cd $(DISTRIBUTE_DIR
)/lib
; rm -f
$(DYNAMIC_NAME_SHORT
); ln -s
$(DYNAMIC_VERSIONED_NAME_SHORT
) $(DYNAMIC_NAME_SHORT
)
# add python - it's not the standard way, indeed...
cp -r python
$(DISTRIBUTE_DIR
)/python
-include $(DEPS)
創作挑戰賽新人創作獎勵來咯，堅持創作打卡瓜分現金大獎
總結
以上是生活随笔為你收集整理的undefined reference to Mat_VarCreate'的全部內容，希望文章能夠幫你解決所遇到的問題。
如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。
