task_struct 结构如何查看及分析
https://www.cnblogs.com/zxc2man/p/6649771.html
進程是處于執行期的程序以及它所管理的資源（如打開的文件、掛起的信號、進程狀態、地址空間等等）的總稱。注意，程序并不是進程，實際上兩個或多個進程不僅有可能執行同一程序，而且還有可能共享地址空間等資源。
Linux內核通過一個被稱為進程描述符的task_struct結構體來管理進程，這個結構體包含了一個進程所需的所有信息。它定義在linux-2.6.38.8/include/linux/sched.h文件中。本文將盡力就task_struct結構體所有成員的用法進行簡要說明。1、進程狀態[cpp] view plain copy print?
volatile long state;
int exit_state;
volatile long state;
int exit_state;
state成員的可能取值如下：
[cpp] view plain copy print?
#define TASK_RUNNING 0
#define TASK_INTERRUPTIBLE 1
#define TASK_UNINTERRUPTIBLE 2
#define __TASK_STOPPED 4
#define __TASK_TRACED 8
/* in tsk->exit_state /
#define EXIT_ZOMBIE 16
#define EXIT_DEAD 32
/ in tsk->state again /
#define TASK_DEAD 64
#define TASK_WAKEKILL 128
#define TASK_WAKING 256
#define TASK_RUNNING 0
#define TASK_INTERRUPTIBLE 1
#define TASK_UNINTERRUPTIBLE 2
#define __TASK_STOPPED 4
#define __TASK_TRACED 8
/ in tsk->exit_state /
#define EXIT_ZOMBIE 16
#define EXIT_DEAD 32
/ in tsk->state again */
#define TASK_DEAD 64
#define TASK_WAKEKILL 128
#define TASK_WAKING 256
系統中的每個進程都必然處于以上所列進程狀態中的一種。
[cpp] view plain copy print?
pid_t pid;
pid_t tgid;
[cpp] view plain copy print?
/* linux-2.6.38.8/include/linux/threads.h */
#define PID_MAX_DEFAULT (CONFIG_BASE_SMALL ? 0x1000 : 0x8000)
/* linux-2.6.38.8/include/linux/threads.h */
#define PID_MAX_DEFAULT (CONFIG_BASE_SMALL ? 0x1000 : 0x8000)
在Linux系統中，一個線程組中的所有線程使用和該線程組的領頭線程（該組中的第一個輕量級進程）相同的PID，并被存放在tgid成員中。只有線程組的領頭線程的pid成員才會被設置為與tgid相同的值。注意，getpid()系統調用返回的是當前進程的tgid值而不是pid值。
[cpp] view plain copy print?
void *stack;
[cpp] view plain copy print?
/* linux-2.6.38.8/kernel/fork.c */
static inline struct thread_info *alloc_thread_info(struct task_struct *tsk)
{
#ifdef CONFIG_DEBUG_STACK_USAGE
gfp_t mask = GFP_KERNEL | __GFP_ZERO;
#else
gfp_t mask = GFP_KERNEL;
#endif
return (struct thread_info *)__get_free_pages(mask, THREAD_SIZE_ORDER);
}
static inline void free_thread_info(struct thread_info *ti)
{
free_pages((unsigned long)ti, THREAD_SIZE_ORDER);
}
/* linux-2.6.38.8/kernel/fork.c */
static inline struct thread_info *alloc_thread_info(struct task_struct *tsk)
{
#ifdef CONFIG_DEBUG_STACK_USAGE
gfp_t mask = GFP_KERNEL | __GFP_ZERO;
#else
gfp_t mask = GFP_KERNEL;
#endif
return (struct thread_info *)__get_free_pages(mask, THREAD_SIZE_ORDER);
}
static inline void free_thread_info(struct thread_info *ti)
{
free_pages((unsigned long)ti, THREAD_SIZE_ORDER);
}
其中，THREAD_SIZE_ORDER宏在linux-2.6.38.8/arch/arm/include/asm/thread_info.h文件中被定義為1，也就是說alloc_thread_info函數通過調用__get_free_pages函數分配2個頁的內存（它的首地址是8192字節對齊的）。
[cpp] view plain copy print?
union thread_union {
struct thread_info thread_info;
unsigned long stack[THREAD_SIZE/sizeof(long)];
};
union thread_union {
struct thread_info thread_info;
unsigned long stack[THREAD_SIZE/sizeof(long)];
};
當進程從用戶態切換到內核態時，進程的內核?？偸强盏?#xff0c;所以ARM的sp寄存器指向這個棧的頂端。因此，內核能夠輕易地通過sp寄存器獲得當前正在CPU上運行的進程。
[cpp] view plain copy print?
/* linux-2.6.38.8/arch/arm/include/asm/current.h */
static inline struct task_struct *get_current(void)
{
return current_thread_info()->task;
}
#define current (get_current())
/* linux-2.6.38.8/arch/arm/include/asm/thread_info.h */
static inline struct thread_info *current_thread_info(void)
{
register unsigned long sp asm (“sp”);
return (struct thread_info )(sp & ~(THREAD_SIZE - 1));
}
/ linux-2.6.38.8/arch/arm/include/asm/current.h */
static inline struct task_struct *get_current(void)
{
return current_thread_info()->task;
}
#define current (get_current())
/* linux-2.6.38.8/arch/arm/include/asm/thread_info.h */
static inline struct thread_info *current_thread_info(void)
{
register unsigned long sp asm (“sp”);
return (struct thread_info *)(sp & ~(THREAD_SIZE - 1));
}
進程內核棧與進程描述符的關系如下圖：
[cpp] view plain copy print?
unsigned int flags; /* per process flags, defined below */
[cpp] view plain copy print?
#define PF_KSOFTIRQD 0x00000001 /* I am ksoftirqd /
#define PF_STARTING 0x00000002 / being created /
#define PF_EXITING 0x00000004 / getting shut down /
#define PF_EXITPIDONE 0x00000008 / pi exit done on shut down /
#define PF_VCPU 0x00000010 / I’m a virtual CPU /
#define PF_WQ_WORKER 0x00000020 / I’m a workqueue worker /
#define PF_FORKNOEXEC 0x00000040 / forked but didn’t exec /
#define PF_MCE_PROCESS 0x00000080 / process policy on mce errors /
#define PF_SUPERPRIV 0x00000100 / used super-user privileges /
#define PF_DUMPCORE 0x00000200 / dumped core /
#define PF_SIGNALED 0x00000400 / killed by a signal /
#define PF_MEMALLOC 0x00000800 / Allocating memory /
#define PF_USED_MATH 0x00002000 / if unset the fpu must be initialized before use /
#define PF_FREEZING 0x00004000 / freeze in progress. do not account to load /
#define PF_NOFREEZE 0x00008000 / this thread should not be frozen /
#define PF_FROZEN 0x00010000 / frozen for system suspend /
#define PF_FSTRANS 0x00020000 / inside a filesystem transaction /
#define PF_KSWAPD 0x00040000 / I am kswapd /
#define PF_OOM_ORIGIN 0x00080000 / Allocating much memory to others /
#define PF_LESS_THROTTLE 0x00100000 / Throttle me less: I clean memory /
#define PF_KTHREAD 0x00200000 / I am a kernel thread /
#define PF_RANDOMIZE 0x00400000 / randomize virtual address space /
#define PF_SWAPWRITE 0x00800000 / Allowed to write to swap /
#define PF_SPREAD_PAGE 0x01000000 / Spread page cache over cpuset /
#define PF_SPREAD_SLAB 0x02000000 / Spread some slab caches over cpuset /
#define PF_THREAD_BOUND 0x04000000 / Thread bound to specific cpu /
#define PF_MCE_EARLY 0x08000000 / Early kill for mce process policy /
#define PF_MEMPOLICY 0x10000000 / Non-default NUMA mempolicy /
#define PF_MUTEX_TESTER 0x20000000 / Thread belongs to the rt mutex tester /
#define PF_FREEZER_SKIP 0x40000000 / Freezer should not count it as freezable /
#define PF_FREEZER_NOSIG 0x80000000 / Freezer won’t send signals to it /
#define PF_KSOFTIRQD 0x00000001 / I am ksoftirqd /
#define PF_STARTING 0x00000002 / being created /
#define PF_EXITING 0x00000004 / getting shut down /
#define PF_EXITPIDONE 0x00000008 / pi exit done on shut down /
#define PF_VCPU 0x00000010 / I’m a virtual CPU /
#define PF_WQ_WORKER 0x00000020 / I’m a workqueue worker /
#define PF_FORKNOEXEC 0x00000040 / forked but didn’t exec /
#define PF_MCE_PROCESS 0x00000080 / process policy on mce errors /
#define PF_SUPERPRIV 0x00000100 / used super-user privileges /
#define PF_DUMPCORE 0x00000200 / dumped core /
#define PF_SIGNALED 0x00000400 / killed by a signal /
#define PF_MEMALLOC 0x00000800 / Allocating memory /
#define PF_USED_MATH 0x00002000 / if unset the fpu must be initialized before use /
#define PF_FREEZING 0x00004000 / freeze in progress. do not account to load /
#define PF_NOFREEZE 0x00008000 / this thread should not be frozen /
#define PF_FROZEN 0x00010000 / frozen for system suspend /
#define PF_FSTRANS 0x00020000 / inside a filesystem transaction /
#define PF_KSWAPD 0x00040000 / I am kswapd /
#define PF_OOM_ORIGIN 0x00080000 / Allocating much memory to others /
#define PF_LESS_THROTTLE 0x00100000 / Throttle me less: I clean memory /
#define PF_KTHREAD 0x00200000 / I am a kernel thread /
#define PF_RANDOMIZE 0x00400000 / randomize virtual address space /
#define PF_SWAPWRITE 0x00800000 / Allowed to write to swap /
#define PF_SPREAD_PAGE 0x01000000 / Spread page cache over cpuset /
#define PF_SPREAD_SLAB 0x02000000 / Spread some slab caches over cpuset /
#define PF_THREAD_BOUND 0x04000000 / Thread bound to specific cpu /
#define PF_MCE_EARLY 0x08000000 / Early kill for mce process policy /
#define PF_MEMPOLICY 0x10000000 / Non-default NUMA mempolicy /
#define PF_MUTEX_TESTER 0x20000000 / Thread belongs to the rt mutex tester /
#define PF_FREEZER_SKIP 0x40000000 / Freezer should not count it as freezable /
#define PF_FREEZER_NOSIG 0x80000000 / Freezer won’t send signals to it */
5、表示進程親屬關系的成員
[cpp] view plain copy print?
struct task_struct real_parent; / real parent process */
struct task_struct parent; / recipient of SIGCHLD, wait4() reports /
struct list_head children; / list of my children /
struct list_head sibling; / linkage in my parent’s children list */
struct task_struct group_leader; / threadgroup leader */
struct task_struct real_parent; / real parent process */
struct task_struct parent; / recipient of SIGCHLD, wait4() reports /
struct list_head children; / list of my children /
struct list_head sibling; / linkage in my parent’s children list */
struct task_struct group_leader; / threadgroup leader */
在Linux系統中，所有進程之間都有著直接或間接地聯系，每個進程都有其父進程，也可能有零個或多個子進程。擁有同一父進程的所有進程具有兄弟關系。
[cpp] view plain copy print?
unsigned int ptrace;
struct list_head ptraced;
struct list_head ptrace_entry;
unsigned long ptrace_message;
siginfo_t last_siginfo; / For ptrace use. */
ifdef CONFIG_HAVE_HW_BREAKPOINT
atomic_t ptrace_bp_refcnt;
endif
#ifdef CONFIG_HAVE_HW_BREAKPOINT
atomic_t ptrace_bp_refcnt;
#endif
成員ptrace被設置為0時表示不需要被跟蹤，它的可能取值如下：
[cpp] view plain copy print?
/* linux-2.6.38.8/include/linux/ptrace.h /
#define PT_PTRACED 0x00000001
#define PT_DTRACE 0x00000002 / delayed trace (used on m68k, i386) /
#define PT_TRACESYSGOOD 0x00000004
#define PT_PTRACE_CAP 0x00000008 / ptracer can follow suid-exec */
#define PT_TRACE_FORK 0x00000010
#define PT_TRACE_VFORK 0x00000020
#define PT_TRACE_CLONE 0x00000040
#define PT_TRACE_EXEC 0x00000080
#define PT_TRACE_VFORK_DONE 0x00000100
#define PT_TRACE_EXIT 0x00000200
/* linux-2.6.38.8/include/linux/ptrace.h /
#define PT_PTRACED 0x00000001
#define PT_DTRACE 0x00000002 / delayed trace (used on m68k, i386) /
#define PT_TRACESYSGOOD 0x00000004
#define PT_PTRACE_CAP 0x00000008 / ptracer can follow suid-exec */
#define PT_TRACE_FORK 0x00000010
#define PT_TRACE_VFORK 0x00000020
#define PT_TRACE_CLONE 0x00000040
#define PT_TRACE_EXEC 0x00000080
#define PT_TRACE_VFORK_DONE 0x00000100
#define PT_TRACE_EXIT 0x00000200
7、Performance Event
[cpp] view plain copy print?
#ifdef CONFIG_PERF_EVENTS
struct perf_event_context *perf_event_ctxp[perf_nr_task_contexts];
struct mutex perf_event_mutex;
struct list_head perf_event_list;
#endif
#ifdef CONFIG_PERF_EVENTS
struct perf_event_context *perf_event_ctxp[perf_nr_task_contexts];
struct mutex perf_event_mutex;
struct list_head perf_event_list;
#endif
Performance Event是一款隨 Linux 內核代碼一同發布和維護的性能診斷工具。這些成員用于幫助PerformanceEvent分析進程的性能問題。
[cpp] view plain copy print?
int prio, static_prio, normal_prio;
unsigned int rt_priority;
const struct sched_class *sched_class;
struct sched_entity se;
struct sched_rt_entity rt;
unsigned int policy;
cpumask_t cpus_allowed;
[cpp] view plain copy print?
/* linux-2.6.38.8/include/linux/sched.h */
#define MAX_USER_RT_PRIO 100
#define MAX_RT_PRIO MAX_USER_RT_PRIO
#define MAX_PRIO (MAX_RT_PRIO + 40)
#define DEFAULT_PRIO (MAX_RT_PRIO + 20)
/* linux-2.6.38.8/include/linux/sched.h */
#define MAX_USER_RT_PRIO 100
#define MAX_RT_PRIO MAX_USER_RT_PRIO
#define MAX_PRIO (MAX_RT_PRIO + 40)
#define DEFAULT_PRIO (MAX_RT_PRIO + 20)
static_prio用于保存靜態優先級，可以通過nice系統調用來進行修改。
[cpp] view plain copy print?
#define SCHED_NORMAL 0
#define SCHED_FIFO 1
#define SCHED_RR 2
#define SCHED_BATCH 3
/* SCHED_ISO: reserved but not implemented yet */
#define SCHED_IDLE 5
#define SCHED_NORMAL 0
#define SCHED_FIFO 1
#define SCHED_RR 2
#define SCHED_BATCH 3
/* SCHED_ISO: reserved but not implemented yet */
#define SCHED_IDLE 5
SCHED_NORMAL用于普通進程，通過CFS調度器實現。SCHED_BATCH用于非交互的處理器消耗型進程。SCHED_IDLE是在系統負載很低時使用。
[cpp] view plain copy print?
/* linux-2.6.38.8/kernel/sched_fair.c /
static const struct sched_class fair_sched_class;
/ linux-2.6.38.8/kernel/sched_rt.c /
static const struct sched_class rt_sched_class;
/ linux-2.6.38.8/kernel/sched_idletask.c /
static const struct sched_class idle_sched_class;
/ linux-2.6.38.8/kernel/sched_stoptask.c */
static const struct sched_class stop_sched_class;
/* linux-2.6.38.8/kernel/sched_fair.c /
static const struct sched_class fair_sched_class;
/ linux-2.6.38.8/kernel/sched_rt.c /
static const struct sched_class rt_sched_class;
/ linux-2.6.38.8/kernel/sched_idletask.c /
static const struct sched_class idle_sched_class;
/ linux-2.6.38.8/kernel/sched_stoptask.c */
static const struct sched_class stop_sched_class;
se和rt都是調用實體，一個用于普通進程，一個用于實時進程，每個進程都有其中之一的實體。
9、進程地址空間
[cpp] view plain copy print?
struct mm_struct *mm, *active_mm;
#ifdef CONFIG_COMPAT_BRK
unsigned brk_randomized:1;
#endif
#if defined(SPLIT_RSS_COUNTING)
struct task_rss_stat rss_stat;
#endif
#ifdef CONFIG_COMPAT_BRK
unsigned brk_randomized:1;
#endif
#if defined(SPLIT_RSS_COUNTING)
struct task_rss_stat rss_stat;
#endif
mm指向進程所擁有的內存描述符，而active_mm指向進程運行時所使用的內存描述符。對于普通進程而言，這兩個指針變量的值相同。但是，內核線程不擁有任何內存描述符，所以它們的mm成員總是為NULL。當內核線程得以運行時，它的active_mm成員被初始化為前一個運行進程的active_mm值。
[cpp] view plain copy print?
int exit_code, exit_signal;
int pdeath_signal; /* The signal sent when the parent dies /
/ ??? /
unsigned int personality;
unsigned did_exec:1;
unsigned in_execve:1; / Tell the LSMs that the process is doing an
* execve */
unsigned in_iowait:1;
/* Revert to default priority/policy when forking /
unsigned sched_reset_on_fork:1;
int exit_code, exit_signal;
int pdeath_signal; / The signal sent when the parent dies /
/ ??? /
unsigned int personality;
unsigned did_exec:1;
unsigned in_execve:1; / Tell the LSMs that the process is doing an
* execve */
unsigned in_iowait:1;
[cpp] view plain copy print?
enum {
PER_LINUX = 0x0000,
PER_LINUX_32BIT = 0x0000 | ADDR_LIMIT_32BIT,
PER_LINUX_FDPIC = 0x0000 | FDPIC_FUNCPTRS,
PER_SVR4 = 0x0001 | STICKY_TIMEOUTS | MMAP_PAGE_ZERO,
PER_SVR3 = 0x0002 | STICKY_TIMEOUTS | SHORT_INODE,
PER_SCOSVR3 = 0x0003 | STICKY_TIMEOUTS |
WHOLE_SECONDS | SHORT_INODE,
PER_OSR5 = 0x0003 | STICKY_TIMEOUTS | WHOLE_SECONDS,
PER_WYSEV386 = 0x0004 | STICKY_TIMEOUTS | SHORT_INODE,
PER_ISCR4 = 0x0005 | STICKY_TIMEOUTS,
PER_BSD = 0x0006,
PER_SUNOS = 0x0006 | STICKY_TIMEOUTS,
PER_XENIX = 0x0007 | STICKY_TIMEOUTS | SHORT_INODE,
PER_LINUX32 = 0x0008,
PER_LINUX32_3GB = 0x0008 | ADDR_LIMIT_3GB,
PER_IRIX32 = 0x0009 | STICKY_TIMEOUTS,/* IRIX5 32-bit /
PER_IRIXN32 = 0x000a | STICKY_TIMEOUTS,/ IRIX6 new 32-bit /
PER_IRIX64 = 0x000b | STICKY_TIMEOUTS,/ IRIX6 64-bit /
PER_RISCOS = 0x000c,
PER_SOLARIS = 0x000d | STICKY_TIMEOUTS,
PER_UW7 = 0x000e | STICKY_TIMEOUTS | MMAP_PAGE_ZERO,
PER_OSF4 = 0x000f, / OSF/1 v4 /
PER_HPUX = 0x0010,
PER_MASK = 0x00ff,
};
enum {
PER_LINUX = 0x0000,
PER_LINUX_32BIT = 0x0000 | ADDR_LIMIT_32BIT,
PER_LINUX_FDPIC = 0x0000 | FDPIC_FUNCPTRS,
PER_SVR4 = 0x0001 | STICKY_TIMEOUTS | MMAP_PAGE_ZERO,
PER_SVR3 = 0x0002 | STICKY_TIMEOUTS | SHORT_INODE,
PER_SCOSVR3 = 0x0003 | STICKY_TIMEOUTS |
WHOLE_SECONDS | SHORT_INODE,
PER_OSR5 = 0x0003 | STICKY_TIMEOUTS | WHOLE_SECONDS,
PER_WYSEV386 = 0x0004 | STICKY_TIMEOUTS | SHORT_INODE,
PER_ISCR4 = 0x0005 | STICKY_TIMEOUTS,
PER_BSD = 0x0006,
PER_SUNOS = 0x0006 | STICKY_TIMEOUTS,
PER_XENIX = 0x0007 | STICKY_TIMEOUTS | SHORT_INODE,
PER_LINUX32 = 0x0008,
PER_LINUX32_3GB = 0x0008 | ADDR_LIMIT_3GB,
PER_IRIX32 = 0x0009 | STICKY_TIMEOUTS,/ IRIX5 32-bit /
PER_IRIXN32 = 0x000a | STICKY_TIMEOUTS,/ IRIX6 new 32-bit /
PER_IRIX64 = 0x000b | STICKY_TIMEOUTS,/ IRIX6 64-bit /
PER_RISCOS = 0x000c,
PER_SOLARIS = 0x000d | STICKY_TIMEOUTS,
PER_UW7 = 0x000e | STICKY_TIMEOUTS | MMAP_PAGE_ZERO,
PER_OSF4 = 0x000f, / OSF/1 v4 */
PER_HPUX = 0x0010,
PER_MASK = 0x00ff,
};
did_exec用于記錄進程代碼是否被execve()函數所執行。
[cpp] view plain copy print?
cputime_t utime, stime, utimescaled, stimescaled;
cputime_t gtime;
#ifndef CONFIG_VIRT_CPU_ACCOUNTING
cputime_t prev_utime, prev_stime;
#endif
unsigned long nvcsw, nivcsw; /* context switch counts /
struct timespec start_time; / monotonic time /
struct timespec real_start_time; / boot based time /
struct task_cputime cputime_expires;
struct list_head cpu_timers[3];
#ifdef CONFIG_DETECT_HUNG_TASK
/ hung task detection /
unsigned long last_switch_count;
#endif
cputime_t utime, stime, utimescaled, stimescaled;
cputime_t gtime;
#ifndef CONFIG_VIRT_CPU_ACCOUNTING
cputime_t prev_utime, prev_stime;
#endif
unsigned long nvcsw, nivcsw; / context switch counts /
struct timespec start_time; / monotonic time /
struct timespec real_start_time; / boot based time /
struct task_cputime cputime_expires;
struct list_head cpu_timers[3];
#ifdef CONFIG_DETECT_HUNG_TASK
/ hung task detection */
unsigned long last_switch_count;
#endif
utime/stime用于記錄進程在用戶態/內核態下所經過的節拍數（定時器）。prev_utime/prev_stime是先前的運行時間，請參考補丁說明http://lkml.indiana.edu/hypermail/linux/kernel/1003.3/02431.html。
[cpp] view plain copy print?
/* signal handlers */
struct signal_struct *signal;
struct sighand_struct *sighand;
/* signal handlers */
struct signal_struct *signal;
struct sighand_struct *sighand;
[cpp] view plain copy print?
/* Protection of (de-)allocation: mm, files, fs, tty, keyrings, mems_allowed,
- mempolicy */
spinlock_t alloc_lock;
/* Protection of (de-)allocation: mm, files, fs, tty, keyrings, mems_allowed,
- mempolicy */
spinlock_t alloc_lock;
（2）、進程描述符使用計數，被置為2時，表示進程描述符正在被使用而且其相應的進程處于活動狀態。
[cpp] view plain copy print?
atomic_t usage;
[cpp] view plain copy print?
int lock_depth; /* BKL lock depth */
[cpp] view plain copy print?
#ifdef CONFIG_SMP
#ifdef __ARCH_WANT_UNLOCKED_CTXSW
int oncpu;
#endif
#endif
#ifdef CONFIG_SMP
#ifdef __ARCH_WANT_UNLOCKED_CTXSW
int oncpu;
#endif
#endif
（5）、preempt_notifier結構體鏈表
[cpp] view plain copy print?
#ifdef CONFIG_PREEMPT_NOTIFIERS
/* list of struct preempt_notifier: */
struct hlist_head preempt_notifiers;
#endif
#ifdef CONFIG_PREEMPT_NOTIFIERS
/* list of struct preempt_notifier: */
struct hlist_head preempt_notifiers;
#endif
（6）、FPU使用計數
[cpp] view plain copy print?
unsigned char fpu_counter;
[cpp] view plain copy print?
#ifdef CONFIG_BLK_DEV_IO_TRACE
unsigned int btrace_seq;
#endif
#ifdef CONFIG_BLK_DEV_IO_TRACE
unsigned int btrace_seq;
#endif
（8）、RCU同步原語
[cpp] view plain copy print?
#ifdef CONFIG_PREEMPT_RCU
int rcu_read_lock_nesting;
char rcu_read_unlock_special;
struct list_head rcu_node_entry;
#endif /* #ifdef CONFIG_PREEMPT_RCU */
#ifdef CONFIG_TREE_PREEMPT_RCU
struct rcu_node rcu_blocked_node;
#endif / #ifdef CONFIG_TREE_PREEMPT_RCU */
#ifdef CONFIG_RCU_BOOST
struct rt_mutex rcu_boost_mutex;
#endif / #ifdef CONFIG_RCU_BOOST */
#ifdef CONFIG_PREEMPT_RCU
int rcu_read_lock_nesting;
char rcu_read_unlock_special;
struct list_head rcu_node_entry;
#endif /* #ifdef CONFIG_PREEMPT_RCU */
#ifdef CONFIG_TREE_PREEMPT_RCU
struct rcu_node rcu_blocked_node;
#endif / #ifdef CONFIG_TREE_PREEMPT_RCU */
#ifdef CONFIG_RCU_BOOST
struct rt_mutex rcu_boost_mutex;
#endif / #ifdef CONFIG_RCU_BOOST */
（9）、用于調度器統計進程的運行信息
[cpp] view plain copy print?
#if defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT)
struct sched_info sched_info;
#endif
#if defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT)
struct sched_info sched_info;
#endif
（10）、用于構建進程鏈表
[cpp] view plain copy print?
struct list_head tasks;
[cpp] view plain copy print?
#ifdef CONFIG_SMP
struct plist_node pushable_tasks;
#endif
#ifdef CONFIG_SMP
struct plist_node pushable_tasks;
#endif
補丁說明請參考：http://lkml.indiana.edu/hypermail/linux/kernel/0808.3/0503.html
[cpp] view plain copy print?
#ifdef CONFIG_CC_STACKPROTECTOR
/* Canary value for the -fstack-protector gcc feature /
unsigned long stack_canary;
#endif
#ifdef CONFIG_CC_STACKPROTECTOR
/ Canary value for the -fstack-protector gcc feature */
unsigned long stack_canary;
#endif
在GCC編譯內核時，需要加上-fstack-protector選項。
[cpp] view plain copy print?
/* PID/PID hash table linkage. */
struct pid_link pids[PIDTYPE_MAX];
struct list_head thread_group; //線程組中所有進程的鏈表
[cpp] view plain copy print?
struct completion vfork_done; / for vfork() */
int __user set_child_tid; / CLONE_CHILD_SETTID */
int __user clear_child_tid; / CLONE_CHILD_CLEARTID */
[cpp] view plain copy print?
/* mm fault and swap info: this can arguably be seen as either mm-specific or thread-specific */
unsigned long min_flt, maj_flt;
/* mm fault and swap info: this can arguably be seen as either mm-specific or thread-specific */
unsigned long min_flt, maj_flt;
（16）、進程權能
[cpp] view plain copy print?
const struct cred __rcu real_cred; / objective and real subjective task
* credentials (COW) */
const struct cred __rcu cred; / effective (overridable) subjective task
* credentials (COW) */
struct cred replacement_session_keyring; / for KEYCTL_SESSION_TO_PARENT */
[cpp] view plain copy print?
char comm[TASK_COMM_LEN];
char comm[TASK_COMM_LEN];
（18）、文件
[cpp] view plain copy print?
/* file system info /
int link_count, total_link_count;
/ filesystem information */
struct fs_struct fs;
/ open file information */
struct files_struct *files;
/* file system info /
int link_count, total_link_count;
/ filesystem information */
struct fs_struct fs;
/ open file information */
struct files_struct *files;
fs用來表示進程與文件系統的聯系，包括當前目錄和根目錄。
[cpp] view plain copy print?
#ifdef CONFIG_SYSVIPC
/* ipc stuff /
struct sysv_sem sysvsem;
#endif
#ifdef CONFIG_SYSVIPC
/ ipc stuff */
struct sysv_sem sysvsem;
#endif
（20）、處理器特有數據
[cpp] view plain copy print?
/* CPU-specific state of this task */
struct thread_struct thread;
/* CPU-specific state of this task */
struct thread_struct thread;
（21）、命名空間
[cpp] view plain copy print?
/* namespaces */
struct nsproxy *nsproxy;
/* namespaces */
struct nsproxy *nsproxy;
（22）、進程審計
[cpp] view plain copy print?
struct audit_context *audit_context;
#ifdef CONFIG_AUDITSYSCALL
uid_t loginuid;
unsigned int sessionid;
#endif
#ifdef CONFIG_AUDITSYSCALL
uid_t loginuid;
unsigned int sessionid;
#endif
（23）、secure computing
[cpp] view plain copy print?
seccomp_t seccomp;
[cpp] view plain copy print?
/* Thread group tracking */
u32 parent_exec_id;
u32 self_exec_id;
/* Thread group tracking */
u32 parent_exec_id;
u32 self_exec_id;
（25）、中斷
[cpp] view plain copy print?
#ifdef CONFIG_GENERIC_HARDIRQS
/* IRQ handler threads */
struct irqaction irqaction;
#endif
#ifdef CONFIG_TRACE_IRQFLAGS
unsigned int irq_events;
unsigned long hardirq_enable_ip;
unsigned long hardirq_disable_ip;
unsigned int hardirq_enable_event;
unsigned int hardirq_disable_event;
int hardirqs_enabled;
int hardirq_context;
unsigned long softirq_disable_ip;
unsigned long softirq_enable_ip;
unsigned int softirq_disable_event;
unsigned int softirq_enable_event;
int softirqs_enabled;
int softirq_context;
#endif
#ifdef CONFIG_GENERIC_HARDIRQS
/ IRQ handler threads */
struct irqaction *irqaction;
#endif
#ifdef CONFIG_TRACE_IRQFLAGS
unsigned int irq_events;
unsigned long hardirq_enable_ip;
unsigned long hardirq_disable_ip;
unsigned int hardirq_enable_event;
unsigned int hardirq_disable_event;
int hardirqs_enabled;
int hardirq_context;
unsigned long softirq_disable_ip;
unsigned long softirq_enable_ip;
unsigned int softirq_disable_event;
unsigned int softirq_enable_event;
int softirqs_enabled;
int softirq_context;
#endif
（26）、task_rq_lock函數所使用的鎖
[cpp] view plain copy print?
/* Protection of the PI data structures: */
raw_spinlock_t pi_lock;
[cpp] view plain copy print?
#ifdef CONFIG_RT_MUTEXES
/* PI waiters blocked on a rt_mutex held by this task /
struct plist_head pi_waiters;
/ Deadlock detection and priority inheritance handling */
struct rt_mutex_waiter *pi_blocked_on;
#endif
#ifdef CONFIG_RT_MUTEXES
/* PI waiters blocked on a rt_mutex held by this task /
struct plist_head pi_waiters;
/ Deadlock detection and priority inheritance handling */
struct rt_mutex_waiter *pi_blocked_on;
#endif
（28）、死鎖檢測
[cpp] view plain copy print?
#ifdef CONFIG_DEBUG_MUTEXES
/* mutex deadlock detection */
struct mutex_waiter blocked_on;
#endif
#ifdef CONFIG_DEBUG_MUTEXES
/ mutex deadlock detection */
struct mutex_waiter *blocked_on;
#endif
（29）、lockdep，參見內核說明文檔linux-2.6.38.8/Documentation/lockdep-design.txt
[cpp] view plain copy print?
#ifdef CONFIG_LOCKDEP
define MAX_LOCK_DEPTH 48UL
u64 curr_chain_key; int lockdep_depth; unsigned int lockdep_recursion; struct held_lock held_locks[MAX_LOCK_DEPTH]; gfp_t lockdep_reclaim_gfp;#endif
#ifdef CONFIG_LOCKDEP
define MAX_LOCK_DEPTH 48UL
u64 curr_chain_key; int lockdep_depth; unsigned int lockdep_recursion; struct held_lock held_locks[MAX_LOCK_DEPTH]; gfp_t lockdep_reclaim_gfp;#endif
（30）、JFS文件系統
[cpp] view plain copy print?
/* journalling filesystem info */
void journal_info;
/ journalling filesystem info */
void *journal_info;
（31）、塊設備鏈表
[cpp] view plain copy print?
/* stacked block device info */
struct bio_list *bio_list;
/* stacked block device info */
struct bio_list *bio_list;
（32）、內存回收
[cpp] view plain copy print?
struct reclaim_state *reclaim_state;
[cpp] view plain copy print?
struct backing_dev_info *backing_dev_info;
[cpp] view plain copy print?
struct io_context *io_context;
struct io_context *io_context;
（35）、記錄進程的I/O計數
[cpp] view plain copy print?
struct task_io_accounting ioac;
if defined(CONFIG_TASK_XACCT)
u64 acct_rss_mem1; /* accumulated rss usage /
u64 acct_vm_mem1; / accumulated virtual memory usage /
cputime_t acct_timexpd; / stime + utime since last update */
endif
#if defined(CONFIG_TASK_XACCT)
u64 acct_rss_mem1; /* accumulated rss usage /
u64 acct_vm_mem1; / accumulated virtual memory usage /
cputime_t acct_timexpd; / stime + utime since last update */
#endif
在Ubuntu 11.04上，執行cat獲得進程1的I/O計數如下：
[cpp] view plain copy print?
$ sudo cat /proc/1/io
$ sudo cat /proc/1/io
[cpp] view plain copy print?
rchar: 164258906
wchar: 455212837
syscr: 388847
syscw: 92563
read_bytes: 439251968
write_bytes: 14143488
cancelled_write_bytes: 2134016
rchar: 164258906
wchar: 455212837
syscr: 388847
syscw: 92563
read_bytes: 439251968
write_bytes: 14143488
cancelled_write_bytes: 2134016
輸出的數據項剛好是task_io_accounting結構體的所有成員。
[cpp] view plain copy print?
#ifdef CONFIG_CPUSETS
nodemask_t mems_allowed; /* Protected by alloc_lock */
int mems_allowed_change_disable;
int cpuset_mem_spread_rotor;
int cpuset_slab_spread_rotor;
#endif
#ifdef CONFIG_CPUSETS
nodemask_t mems_allowed; /* Protected by alloc_lock */
int mems_allowed_change_disable;
int cpuset_mem_spread_rotor;
int cpuset_slab_spread_rotor;
#endif
（37）、Control Groups
[cpp] view plain copy print?
#ifdef CONFIG_CGROUPS
/* Control Group info protected by css_set_lock */
struct css_set __rcu cgroups;
/ cg_list protected by css_set_lock and tsk->alloc_lock /
struct list_head cg_list;
#endif
#ifdef CONFIG_CGROUP_MEM_RES_CTLR / memcg uses this to do batch job /
struct memcg_batch_info {
int do_batch; / incremented when batch uncharge started */
struct mem_cgroup memcg; / target memcg of uncharge /
unsigned long bytes; / uncharged usage /
unsigned long memsw_bytes; / uncharged mem+swap usage /
} memcg_batch;
#endif
#ifdef CONFIG_CGROUPS
/ Control Group info protected by css_set_lock */
struct css_set __rcu cgroups;
/ cg_list protected by css_set_lock and tsk->alloc_lock /
struct list_head cg_list;
#endif
#ifdef CONFIG_CGROUP_MEM_RES_CTLR / memcg uses this to do batch job /
struct memcg_batch_info {
int do_batch; / incremented when batch uncharge started */
struct mem_cgroup memcg; / target memcg of uncharge /
unsigned long bytes; / uncharged usage /
unsigned long memsw_bytes; / uncharged mem+swap usage */
} memcg_batch;
#endif
（38）、futex同步機制
[cpp] view plain copy print?
#ifdef CONFIG_FUTEX
struct robust_list_head __user *robust_list;
#ifdef CONFIG_COMPAT
struct compat_robust_list_head __user *compat_robust_list;
#endif
struct list_head pi_state_list;
struct futex_pi_state *pi_state_cache;
#endif
#ifdef CONFIG_FUTEX
struct robust_list_head __user *robust_list;
#ifdef CONFIG_COMPAT
struct compat_robust_list_head __user *compat_robust_list;
#endif
struct list_head pi_state_list;
struct futex_pi_state *pi_state_cache;
#endif
（39）、非一致內存訪問（NUMA Non-Uniform Memory Access）
[cpp] view plain copy print?
#ifdef CONFIG_NUMA
struct mempolicy mempolicy; / Protected by alloc_lock */
short il_next;
#endif
#ifdef CONFIG_NUMA
struct mempolicy mempolicy; / Protected by alloc_lock */
short il_next;
#endif
（40）、文件系統互斥資源
[cpp] view plain copy print?
atomic_t fs_excl; /* holding fs exclusive resources */
[cpp] view plain copy print?
struct rcu_head rcu;
[cpp] view plain copy print?
struct pipe_inode_info *splice_pipe;
[cpp] view plain copy print?
#ifdef CONFIG_TASK_DELAY_ACCT
struct task_delay_info *delays;
#endif
#ifdef CONFIG_TASK_DELAY_ACCT
struct task_delay_info *delays;
#endif
（44）、fault injection，參考內核說明文件linux-2.6.38.8/Documentation/fault-injection/fault-injection.txt
[cpp] view plain copy print?
#ifdef CONFIG_FAULT_INJECTION
int make_it_fail;
#endif
#ifdef CONFIG_FAULT_INJECTION
int make_it_fail;
#endif
（45）、FLoating proportions
[cpp] view plain copy print?
struct prop_local_single dirties;
[cpp] view plain copy print?
#ifdef CONFIG_LATENCYTOP
int latency_record_count;
struct latency_record latency_record[LT_SAVECOUNT];
#endif
#ifdef CONFIG_LATENCYTOP
int latency_record_count;
struct latency_record latency_record[LT_SAVECOUNT];
#endif
（47）、time slack values，常用于poll和select函數
[cpp] view plain copy print?
unsigned long timer_slack_ns;
unsigned long default_timer_slack_ns;
unsigned long timer_slack_ns;
unsigned long default_timer_slack_ns;
（48）、socket控制消息（control message）
[cpp] view plain copy print?
struct list_head *scm_work_list;
[cpp] view plain copy print?
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
/* Index of current stored address in ret_stack /
int curr_ret_stack;
/ Stack of return addresses for return function tracing */
struct ftrace_ret_stack ret_stack;
/ time stamp for last schedule /
unsigned long long ftrace_timestamp;
/
* Number of functions that haven’t been traced
* because of depth overrun.
/
atomic_t trace_overrun;
/ Pause for the tracing /
atomic_t tracing_graph_pause;
#endif
#ifdef CONFIG_TRACING
/ state flags for use by tracers /
unsigned long trace;
/ bitmask of trace recursion /
unsigned long trace_recursion;
#endif / CONFIG_TRACING */
總結
以上是生活随笔為你收集整理的task_struct 结构如何查看及分析的全部內容，希望文章能夠幫你解決所遇到的問題。
- 上一篇： 单笔充值DNF点券的额度上限是多少？
- 下一篇： 试管婴儿必须要刨妇产吗