ubuntu恢復系統

Don’t try to convince yourself otherwise: along with all the good stuff, you’re going to have bad days with Linux.

否則，請不要試圖說服自己：與所有好的東西一起，您將在Linux上度過糟糕的日子。

• You (or the users you support) are going to mistype commands and permanently destroy documents.
  您(或您支持的用戶)將輸錯命令并永久銷毀文檔。
• You’re going to experience that sinking feeling when you realize that some really important piece of hardware or software has just gone and failed. That’s gratitude after everything you did for it all those years.
  當您意識到某些非常重要的硬件或軟件已經失效并失敗時，您將體驗到那種下沉的感覺。 這些年來，您所做的一切都是對您的感謝。

Being properly backed up means that you can walk away from a non-functioning OS or computer and rebuild it all somewhere else. But that’s always going to be Plan B. Plan A is to recover.

正確備份意味著您可以離開運行不正常的操作系統或計算機，然后在其他任何地方重建它們。 但這始終是計劃B。計劃A是要恢復。

在Ubuntu上使用恢復模式 (Using recovery mode on Ubuntu)

Linux not letting you log in normally (perhaps the boot process unexpectedly stops before displaying the login screen, for instance)? You’ll want some basic system administration tools.

Linux是否不允許您正常登錄(例如，引導過程在顯示登錄屏幕之前意外停止了？)？ 您將需要一些基本的系統管理工具。

But wait: if Linux won’t load, how are you going to launch those tools? Well, even if Linux won’t load all the way to a normal command prompt, often it’ll get you to the GRUB menu. From there you can use the up and down arrow keys and then Enter to select a Linux kernel running in recovery mode which, as you’ll soon see, will open up a whole bag of tricks.

但是請稍等：如果Linux無法加載，您將如何啟動這些工具？ 好吧，即使Linux不會一路加載到正常的命令提示符下，它通常也會帶您進入GRUB菜單。 從那里，您可以使用向上和向下箭頭鍵，然后按Enter選擇運行在恢復模式下的Linux內核，您很快就會看到，它將打開一整套竅門。

As you can see from the figure below, once Ubuntu is loaded in recovery mode, you’ll be shown a menu of tools that address some common boot-time problems. It’s worth trying each one that seems like it might address your root problem. “Clean”, for instance, will remove unused files if you suspect the trouble stems from a full disk. “dpkg” will attempt to fix any broken apt-based software packages that might be gumming things up. (The “dpkg” tool might require that you first enable networking.)

從下圖可以看出，以恢復模式加載Ubuntu后，將顯示一個工具菜單，該工具可以解決一些常見的啟動時問題。 值得嘗試似乎可以解決您的根本問題的每一個。 例如，如果您懷疑問題是由于磁盤已滿，“干凈”將刪除未使用的文件。 “ dpkg”將嘗試修復任何破壞了apt的軟件包，這些軟件包可能會使事情陷入困境。 (“ dpkg”工具可能要求您首先啟用網絡。)

The “root” option will open a root command line shell session for you where you’ll have Bash at your disposal. In general, using a simple shell session for recovery rather than a full GUI desktop makes a lot of sense, because the fewer complicated services you’ve got running, the more likely it is that you’ll be able to at least get your system running. Once you do manage to get a working command prompt, you can start poking around to see if you can identify and fix the problem.

“ root”選項將為您打開一個根命令行shell會話，您將在其中使用Bash。 通常，使用簡單的shell會話進行恢復而不是使用完整的GUI桌面很有用，因為您運行的復雜服務越少，至少能夠獲得系統的可能性就越大。運行。 一旦你設法得到一個工作命令提示符下，你就可以開始閑逛，看看你是否能夠識別并解決問題。

But at the very least, you’ll look mighty cool doing it.

但是至少，這樣做會看起來非常酷。

But what are those tools? Got an Ubuntu machine running? Go take a look for yourself. The code running the menu must already exist somewhere within an Ubuntu file system. Use “locate” to find it.

但那些是什么工具？ 有Ubuntu計算機在運行嗎？ 你自己去看看 運行菜單的代碼必須已經存在于Ubuntu文件系統中的某個位置。 使用“定位”找到它。

locate recovery-mode /lib/recovery-mode /lib/recovery-mode/l10n.sh /lib/recovery-mode/options /lib/recovery-mode/recovery-menu /lib/recovery-mode/options/apt-snapshots /lib/recovery-mode/options/clean /lib/recovery-mode/options/dpkg /lib/recovery-mode/options/failsafeX /lib/recovery-mode/options/fsck /lib/recovery-mode/options/grub /lib/recovery-mode/options/network /lib/recovery-mode/options/root /lib/recovery-mode/options/system-summary

Note that the “l10n.sh” script sets appropriate environment variables for the menu. If you navigate over to the /lib/recovery-mode/ directory you’ll see that the “recovery-menu” file is the script that displays the menu interface that you saw above. The /lib/recovery-mode/options/ directory contains files for executing each of the menu items…like “fsck” that will check and, if possible, fix any broken file systems.

請注意，“ l10n.sh”腳本為菜單設置了適當的環境變量。 如果導航到/ lib / recovery-mode /目錄，您將看到“ recovery-menu”文件是顯示您在上面看到的菜單界面的腳本。 / lib / recovery-mode / options /目錄包含用于執行每個菜單項的文件，例如“ fsck”，它將檢查并(如果可能)修復損壞的文件系統。

Since, based on previous chapters in the book, you’re now an accomplished Bash scripting expert, why not take a look at each of the scripts in the options/ directory to see if you can figure out how they work. Here are the contents of the “fsck” script to get you going. Note the way the script is nicely documented (using the “#” character) to help you understand what’s going on.

由于根據您本書的前幾章，您現在是一名精通Bash腳本的專家，所以為什么不看看options /目錄中的每個腳本來看看您是否可以了解它們的工作原理。 以下是“ fsck”腳本的內容，可助您一臂之力。 請注意，腳本的記錄方式(使用“＃”字符)可以很好地幫助您了解正在發生的事情。

cat /lib/recovery-mode/options/fsck #!/bin/sh . /lib/recovery-mode/l10n.sh <1> if [ "$1" = "test" ]; thenecho $(eval_gettext "Check all file systems")exit 0 fi # Actual code is in recovery-menu itself <2> exit 0

Here are a couple of things you can try on your own:

您可以嘗試以下幾項：

• Manually run the “clean” script on a Debian/Ubuntu machine. What happened?
  在Debian / Ubuntu機器上手動運行“ clean”腳本。 發生了什么？

• Then try carefully editing the /lib/recovery-mode/recovery-menu script (make a backup copy first). Perhaps just change something simple, like the menu title or one of the script descriptions. Then reboot your machine and, from the GRUB menu, go into Recovery Mode to see what it looks like.

  然后嘗試仔細編輯/ lib / recovery-mode / recovery-menu腳本(首先制作備份副本)。 也許只需更改一些簡單的內容，例如菜單標題或腳本描述之一。 然后重新啟動計算機，然后從GRUB菜單進入“恢復模式”以查看其外觀。

With some variations and exceptions, you should be able to put those examples to good use elsewhere.

有了一些變體和例外，您應該能夠在其他地方充分利用這些示例。

This article is adapted from chapter 6 (Emergency tools: build a system recovery device) of my Manning “Linux in Action” book. There’s lots more fun where this came from, including a hybrid course called Linux in Motion that’s made up of more than two hours of video and around 40% of the text of Linux in Action. Who knows…you might also enjoy my Learn Amazon Web Services in a Month of Lunches.

本文改編自 Manning的《 Linux in Action》一書的 第6章(緊急工具：構建系統恢復設備) 。 這有很多有趣的地方，包括一個名為Linux in Motion的混合課程，該課程由兩個多小時的視頻和大約40％的 Linux in Action 文本組成 。 誰知道……您可能還會 在一個月的午餐中 享受我的 Learn Amazon Web Services 。

翻譯自: https://www.freecodecamp.org/news/the-ubuntu-recovery-menu-demystifying-linux-system-recovery/

ubuntu恢復系統

總結

以上是生活随笔為你收集整理的ubuntu恢复系统_Ubuntu恢复菜单：揭开Linux系统恢复神秘面纱的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。