通過OVF部署Linux主機后提示 ringing up interface eth0:? Device eth0 does not seem to be present,delaying initialization.

解決辦法：

首先，打開/etc/udev/rules.d/70-persistent-net.rules內容如下面例子所示：

# vi /etc/udev/rules.d/70-persistent-net.rules
# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:8f:89:9
7", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:50:bd:1
7", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"

記錄下，eth1網卡的mac地址00:0c:29:50:bd:17

接下來，打開/etc/sysconfig/network-scripts/ifcfg-eth0

# vi /etc/sysconfig/network-scripts/ifcfg-eth0

將 DEVICE="eth0"? 改成? DEVICE="eth1"? ,
將 HWADDR="00:0c:29:8f:89:97" 改成上面的mac地址? HWADDR="00:0c:29:50:bd:17"

最后，重啟網絡

# service network restart
或者

# /etc/init.d/network restart

正常了

?

如果覺得顯示eth1 覺得別扭，先刪除上面一行然后 修改eht1 為eth0

來自： http://www.linuxidc.com/Linux/2012-12/76248.htm

轉載于:https://www.cnblogs.com/sunpear/p/6289067.html

總結

以上是生活随笔為你收集整理的CentOS Linux解决 Device eth0 does not seem to be present的全部?jī)?nèi)容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。