實驗環境：CentOS6.8。

[root@localhost6 ~]#ip a #查看網卡信息；現準備修改eth1的網卡名 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00inet 127.0.0.1/8 scope host loinet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000link/ether 00:0c:29:d7:91:33 brd ff:ff:ff:ff:ff:ffinet 172.16.252.242/16 brd 172.16.255.255 scope global eth0inet6 fe80::20c:29ff:fed7:9133/64 scope link valid_lft forever preferred_lft forever 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000link/ether 00:0c:29:d7:91:3d brd ff:ff:ff:ff:ff:ffinet 172.16.252.199/16 brd 172.16.255.255 scope global eth1inet6 fe80::20c:29ff:fed7:913d/64 scope link valid_lft forever preferred_lft forever

實驗步驟：

　　1、修改網卡名的配置文件；

　　2、卸載網卡驅動；

　　3、裝載網卡驅動。

#1、修改網卡名的配置文件
#修改網卡名的配置文件，在/etc/udev/rules.d/70-persistent-net.rules
[root@localhost6 ~]#cd /etc/udev/
[root@localhost6 udev]#ls
makedev.d rules.d udev.conf
[root@localhost6 udev]#cd rules.d/ [root@localhost6 rules.d]#ls 60-fprint-autosuspend.rules 60-raw.rules 90-alsa.rules 99-fuse.rules 60-openct.rules 70-persistent-cd.rules 90-hal.rules 60-pcmcia.rules 70-persistent-net.rules 98-kexec.rules [root@localhost6 rules.d]#vi 70-persistent-net.rules # This file was automatically generated by the /lib/udev/write_net_rules # program, run by the persistent-net-generator.rules rules file. # # You can modify it, as long as you keep each rule on a single # line, and change only the value of the NAME= key.# PCI device 0x8086:0x100f (e1000) ##e1000驅動程序名 SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:d7:91:33", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"# PCI device 0x8086:0x100f (e1000) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:d7:91:3d", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1" ~ ##將NAME="eth1"修改成ethxin ~ ~ ~ "70-persistent-net.rules" 11L, 585C

[root@localhost6 rules.d]#lsmod | grep -i 'e1000'　　#查看驅動程序模塊
e1000 134863 0

#2、卸載網卡驅動
[root@localhost6 rules.d]#modprobe -r e1000　　#卸載網卡驅動
[root@localhost6 rules.d]#lsmod | grep -i 'e1000'　　#查看驅動程序模塊，沒有數據顯示 #3、裝載網卡驅動
[root@localhost6 ~]#modprobe e1000　　#裝載網卡
[root@localhost6 ~]#ip a

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN?

link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
4: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:d7:91:33 brd ff:ff:ff:ff:ff:ff
inet 172.16.252.242/16 brd 172.16.255.255 scope global eth0
inet6 fe80::20c:29ff:fed7:9133/64 scope link
valid_lft forever preferred_lft forever
5: ethxin: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
link/ether 00:0c:29:d7:91:3d brd ff:ff:ff:ff:ff:ff
inet6 fe80::20c:29ff:fed7:913d/64 scope link
valid_lft forever preferred_lft forever

?

?

轉載于:https://www.cnblogs.com/wzhuo/p/6822277.html

《新程序員》：云原生和全面數字化實踐50位技術專家共同創作，文字、視頻、音頻交互閱讀

總結

以上是生活随笔為你收集整理的实例：修改网卡名的全部?jī)?nèi)容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。