當前位置：首頁 > 运维知识 > Android >内容正文

Android

Android N Display Size

發布時間：2025/4/16 Android 23 豆豆

生活随笔收集整理的這篇文章主要介紹了 Android N Display Size 小編覺得挺不錯的,現在分享給大家,幫大家做個參考.

點擊打開鏈接

Android N新特性-屏幕縮放

Android?7.0 支持用戶設置顯示尺寸，以放大或縮小屏幕上的所有元素，從而提升設備對視力不佳用戶的可訪問性。用戶無法將屏幕縮放至低于最小屏幕寬度 sw320dp，該寬度是 Nexus 4 的寬度，也是常規中等大小手機的寬度。

當設備密度發生更改時，系統會以如下方式通知正在運行的應用：?
如果是面向 API 級別 23 或更低版本系統的應用，系統會自動終止其所有后臺進程。這意味著如果用戶切換離開此類應用，轉而打開 Settings 屏幕并更改 Display size 設置，則系統會像處理內存不足的情況一樣終止該應用。如果應用具有任何前臺進程，則系統會如處理運行時更改中所述將配置變更通知給這些進程，就像對待設備屏幕方向變更一樣。?
如果是面向?android?7.0 的應用，則其所有進程（前臺和后臺）都會收到有關配置變更的通知，如處理運行時更改中所述。?
大多數應用并不需要進行任何更改即可支持此功能，不過前提是這些應用遵循 Android 最佳做法。具體要檢查的事項：

在屏幕寬度為 sw320dp 的設備上測試您的應用，并確保其充分運行。
當設備配置發生變更時，更新任何與密度相關的緩存信息，例如緩存位圖或從網絡加載的資源。當應用從暫停狀態恢復運行時，檢查配置變更。?
注：如果您要緩存與配置相關的數據，則最好也包括相關元數據，例如該數據對應的屏幕尺寸或像素密度。保存這些元數據便于您在配置變更后決定是否需要刷新緩存數據。
避免用像素單位指定尺寸，因為像素不會隨屏幕密度縮放。應改為使用與密度無關像素 (dp) 單位指定尺寸?

Dpi,dp,ppi,sp,in&px參考

Android屏幕適配全攻略

Display Size分析

Display Size 對應手機的Settings->Display->Display size。用來縮放手機屏幕。?
流程分析?
1.?screen_zoom_activity.xml?
Display Size調整設置項對應的布局文件,通過seekbar來顯示縮放等級，通過按鈕來調整等級?
2.?CustomPreviewSeekBarPreferenceFragment.Java

final int max = Math.max(1, mEntries.length - 1); final LabeledSeekBar seekBar = (LabeledSeekBar) content.findViewById(R.id.seek_bar); seekBar.setLabels(mEntries); seekBar.setMax(max); seekBar.setProgress(mInitialIndex);

mEntries數組長度決定了縮放調整的級數，數組內容為每個等級的標簽，mInitialIndex決定了當前所在的級數，第一次獲取的則為默認等級。?
3.?ScreenZoomSettings.java?
該類繼承自PreviewSeekBarPreferenceFragment.java，該類確定了mEntries和mInitialIndex的值。這兩個值都是由DisplayDensityUtils對象獲得。?
4.?DisplayDensityUtils.java?
mEntries和mInitialIndex可以看到是通過DisplayDensityUtils的getEntries()和getCurrentIndex()方法獲得。而該方法中返回值搜索代碼即可看到是在該類的構造方法中確定。?
源碼如下

public class DisplayDensityUtils {/** Minimum increment between density scales. */private static final float MIN_SCALE_INTERVAL = 0.09f;/** Minimum density scale. This is available on all devices. */private static final float MIN_SCALE = 0.85f;/** Maximum density scale. The actual scale used depends on the device. */private static final float MAX_SCALE = 1.50f;/** Summary used for "default" scale. */public static final int SUMMARY_DEFAULT = R.string.screen_zoom_summary_default;/** Summary used for "custom" scale. */private static final int SUMMARY_CUSTOM = R.string.screen_zoom_summary_custom;/*** Summaries for scales smaller than "default" in order of smallest to* largest.*/private static final int[] SUMMARIES_SMALLER = new int[] {R.string.screen_zoom_summary_small};/*** Summaries for scales larger than "default" in order of smallest to* largest.*/private static final int[] SUMMARIES_LARGER = new int[] {R.string.screen_zoom_summary_large,R.string.screen_zoom_summary_very_large,R.string.screen_zoom_summary_extremely_large,};/*** Minimum allowed screen dimension, corresponds to resource qualifiers* "small" or "sw320dp". This value must be at least the minimum screen* size required by the CDD so that we meet developer expectations.*/private static final int MIN_DIMENSION_DP = 320;private final String[] mEntries;private final int[] mValues;private final int mDefaultDensity;private final int mCurrentIndex;public DisplayDensityUtils(Context context) {final int defaultDensity = DisplayDensityUtils.getDefaultDisplayDensity(Display.DEFAULT_DISPLAY);if (defaultDensity <= 0) {mEntries = null;mValues = null;mDefaultDensity = 0;mCurrentIndex = -1;return;}final Resources res = context.getResources();final DisplayMetrics metrics = res.getDisplayMetrics();final int currentDensity = metrics.densityDpi;int currentDensityIndex = -1;// Compute number of "larger" and "smaller" scales for this display.final int minDimensionPx = Math.min(metrics.widthPixels, metrics.heightPixels);final int maxDensity = DisplayMetrics.DENSITY_MEDIUM * minDimensionPx / MIN_DIMENSION_DP;final float maxScale = Math.min(MAX_SCALE, maxDensity / (float) defaultDensity);final float minScale = MIN_SCALE;final int numLarger = (int) MathUtils.constrain((maxScale - 1) / MIN_SCALE_INTERVAL,0, SUMMARIES_LARGER.length);final int numSmaller = (int) MathUtils.constrain((1 - minScale) / MIN_SCALE_INTERVAL,0, SUMMARIES_SMALLER.length);String[] entries = new String[1 + numSmaller + numLarger];int[] values = new int[entries.length];int curIndex = 0;if (numSmaller > 0) {final float interval = (1 - minScale) / numSmaller;for (int i = numSmaller - 1; i >= 0; i--) {// Round down to a multiple of 2 by truncating the low bit.final int density = ((int) (defaultDensity * (1 - (i + 1) * interval))) & ~1;if (currentDensity == density) {currentDensityIndex = curIndex;}entries[curIndex] = res.getString(SUMMARIES_SMALLER[i]);values[curIndex] = density;curIndex++;}}if (currentDensity == defaultDensity) {currentDensityIndex = curIndex;}values[curIndex] = defaultDensity;entries[curIndex] = res.getString(SUMMARY_DEFAULT);curIndex++;if (numLarger > 0) {final float interval = (maxScale - 1) / numLarger;for (int i = 0; i < numLarger; i++) {// Round down to a multiple of 2 by truncating the low bit.final int density = ((int) (defaultDensity * (1 + (i + 1) * interval))) & ~1;if (currentDensity == density) {currentDensityIndex = curIndex;}values[curIndex] = density;entries[curIndex] = res.getString(SUMMARIES_LARGER[i]);curIndex++;}}final int displayIndex;if (currentDensityIndex >= 0) {displayIndex = currentDensityIndex;} else {// We don't understand the current density. Must have been set by// someone else. Make room for another entry...int newLength = values.length + 1;values = Arrays.copyOf(values, newLength);values[curIndex] = currentDensity;entries = Arrays.copyOf(entries, newLength);entries[curIndex] = res.getString(SUMMARY_CUSTOM, currentDensity);displayIndex = curIndex;}mDefaultDensity = defaultDensity;mCurrentIndex = displayIndex;mEntries = entries;mValues = values;}public String[] getEntries() {return mEntries;}public int getCurrentIndex() {return mCurrentIndex;} }

構造函數首先根據默認DPI來計算可縮放的等級數->填充smaller的mEntries標簽內容->設置默認密度等級的下標和填充標簽->填充larger的mEntries的標簽內容

計算等級數

final int minDimensionPx = Math.min(metrics.widthPixels, metrics.heightPixels); final int maxDensity = DisplayMetrics.DENSITY_MEDIUM * minDimensionPx / MIN_DIMENSION_DP; final float maxScale = Math.min(MAX_SCALE, maxDensity / (float) defaultDensity); final float minScale = MIN_SCALE; final int numLarger = (int) MathUtils.constrain((maxScale - 1) / MIN_SCALE_INTERVAL,0, SUMMARIES_LARGER.length); final int numSmaller = (int) MathUtils.constrain((1 - minScale) / MIN_SCALE_INTERVAL,0, SUMMARIES_SMALLER.length); String[] entries = new String[1 + numSmaller + numLarger];

defaultDensity是通過 DisplayDensityUtils.getDefaultDisplayDensity(Display.DEFAULT_DISPLAY)獲取，該默認密度對應代碼中ro.sf.lcd_density?
numSmaller為最小為0，最大為1，此處值為1?
numLarger則為0到3之間，具體取決于maxScale，它又取決于 maxDensity / (float) defaultDensity

此處以測試機5015為例，其ro.sf.lcd_density默認為240dpi,width為480px,height為854px 則defaultDensity為240 maxDensity = DisplayMetrics.DENSITY_MEDIUM * minDimensionPx / MIN_DIMENSION_DP ==>160*480/320 =240 則maxScale = 240/240 = 1 則numLarger = 0

修改Android DPI?
代碼路徑:alps/device/sagetel/sr6580_we_n/system.prop,ro.sf.lcd_density修改該值則修改了手機的默認密度

填充smaller

設置默認密度

if (currentDensity == defaultDensity) {currentDensityIndex = curIndex;//設置默認下標 } values[curIndex] = defaultDensity; entries[curIndex] = res.getString(SUMMARY_DEFAULT);填充默認等級的描述

填充larger

等級客制化

可通過修改ro.sf.lcd_density值來改變縮放等級數，density越小，等級數越多，但最大5級。為了界面顯示正常，我們需調整合適的density，density測試可通過

修改屏幕Dpi adb shell wm density 240 //修改屏幕密度為240dpi adb shell wm density reset //重置屏幕密度為默認密度

總結

以上是生活随笔為你收集整理的Android N Display Size的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。

上一篇： androidexternal目录下新增
下一篇： Android.mk解析