在SD/MMC卡上实现hive (Implement WinCE HIVEROM system on NAND or SD system )
如果有人也感興趣在sd/mmc上實現binfs，除了做以上的動作之外還需要修改eboot，讓eboot去生成binfs分區，并將ext.bin中binfs分區部的bin數據放到binfs分區中。這個我也已經實現了。有空再表吧...
來些英文的…
Implement WinCE HIVE&ROM
system on NAND or SD system
?
?
1.0??????Scope
This document details in how toimplement the WinCE6 HIVE&ROM system. Two types of media are widely used in Au1300 system, the NAND flash and the SD card. The document will describe the steps implementing HIVE&ROM system for both media type.
2.0??????Hardware details
NAND flash is connected with Au1300’s static memory controller. The SD card is connected with SD slot.
3.0??????Creating HIVE&ROM system
Section 3.1 will describe how to implement HIVE&ROM system on NAND flash disk while section 3.2 describes the similar system way to create HVIE&ROM system on SD card.
3.1?HIVE&ROM system on NAND flash
3.1.1????Add catalog components
catalog->CEBASE->File Systems and Data Store->File system->ROM-only File System
catalog->CEBASE->File Systems and Data Store->Registry Storage- >Hive-based Registry
?
?
catalog->CEBASE-> File Systems and Data Store->Storage Manager ->FAT File System
catalog->CEBASE-> File Systems and Data Store->Storage Manager ->Partition Driver
catalog->Third Party->AVN13xx:MIPSII->Storage->NAND
3.1.2????Step2: Registry settings
Update nand fmd driver registry with following content. The nand fmd driver registry is located /Drivers/Nandfmd/nandfmd.reg.
?
; HIVE BOOT SECTION
; This file is to be included in platform.reg if required.
[HKEY_LOCAL_MACHINE\Drivers\Builtin\NAND]
?? "Profile"="NAND"
?? "IClass"=multi_sz:"{A4E7EDDA-E575-4252-9D6B-4195D48BB865}"
?? "Order"=dword:0
?? "FriendlyName"="NAND FLASH Driver"
?? "Dll"="NANDFMD.dll"
?? "Prefix"="DSK"
?? "Index"=dword:1
??? "Flags"=dword:1000
?
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\NAND]
??? "DriverPath"="Drivers\\Builtin\\NAND"
??? "LoadFlags"=dword:1
??? "Order"=dword:0
?
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\NAND]
?? "Name"="NAND FLASH Storage"
?? "DefaultFileSystem"="FATFS"
? ??????? "PartitionDriver"="mspart.dll"
?? "Folder"="NAND FLASH"
?? "AutoPart"=dword:1
?? "AutoMount"=dword:1
?? "AutoFormat"=dword:1
?
[HKEY_LOCAL_MACHINE\init\BootVars]
?? "SystemHive"="Documents and Settings\\system.hv"
?? "ProfileDir"="Documents and Settings"
?? "Flags"=dword:3
?? "RegistryFlags"=dword:1
?? "NoDefaultUser"=dword:0
?
; END HIVE BOOT SECTION
3.2?HIVE&ROM system on SD card
3.2.1????Add catalog components
catalog->CEBASE->File Systems and Data Store->File system->ROM-only File System
catalog->CEBASE->File Systems and Data Store->Registry Storage- >Hive-based Registry
?
?
catalog->CEBASE-> File Systems and Data Store->Storage Manager ->FAT File System
catalog->CEBASE-> File Systems and Data Store->Storage Manager ->Partition Driver
?
catalog->Third Party->AVN13xx:MIPSII->Storage->Removable->Secure Digital/MMC
?
3.2.2????Step2: Registry settings
Update SDIO host driver registry with following content. The SDIO driver registry is located /Drivers/SDIO/sdio.reg.
;
;
; Alchemy Au1100 SD Controller registry settings
; HIVE BOOT SECTION
?
?? ; setting for SD bus driver to load driver
[HKEY_LOCAL_MACHINE\Drivers\Builtin\SDHC_Au1100]
?? "Dll"="SDIO.dll"
?? "Order"=dword:1
?? "Prefix"="SDP"
?
?? ; force the host controller to run in the PIO mode instead of
?? ; of DMA mode.
?? "PIOMode"=dword:0
??
?? ; Disable the MMC 8 bit wide data bus for SD0, the eMMC slot, which is slot 1
?? ; for emmc device, dont disable 8 bits bus
?? ; for sd device, only support 4 bits bus
?? "Disable8BitBus"=dword:1
?? "Index"=dword:1
?? "Flags"=dword:1000
?
[HKEY_LOCAL_MACHINE\Drivers\Builtin\SDBusDriver]
?? "Dll"="SDBus.dll"
?? "Order"=dword:0
?? "Index"=dword:1
?? "Prefix"="SDC"
?? "ThreadPriority"=dword:64???? ; default thread priority for dispatch thread
?? "RequestListDepth"=dword:30?? ; pre-allocated requests
?? "Flags"=dword:11000 ; DEVFLAGS_TRUSTEDCALLERONLY
?? "IClass"=multi_sz:"{20FA98A8-B298-4b32-8D72-C716AEE2FA84}=%b","{6F40791D-300E-44E4-BC38-E0E63CA8375C}=%b"
?
[HKEY_LOCAL_MACHINE\Drivers\SDCARD\ClientDrivers\Class\SDMemory_Class]
?? "Dll"="SDMemory.dll"
??? "Order"=dword:1
?? "Prefix"="DSK"
?? "BlockTransferSize"=dword:40? ; send no more than 64 blocks of data per bus transfer
?? ;"SingleBlockWrites"=dword:1? ; alternatively force the driver to use single block access
?? ;"IdleTimeout"=dword:7D0????? ; 2000 milliseconds
?? ;"IdlePowerState"=dword:2???? ; 0 == D0, 1 == D1, etc.
?? ;"DisablePowerManagement"=""? ; if value present, then disable (remove value to enable)
?? "Profile"="SDMemory"
?? "IClass"=multi_sz:"{A4E7EDDA-E575-4252-9D6B-4195D48BB865}",
???????????????????? "{A32942B7-920C-486b-B0E6-92A702A99B35}"
?
[HKEY_LOCAL_MACHINE\Drivers\SDCARD\ClientDrivers\Class\MMC_Class]
?? "Dll"="SDMemory.dll"
?? "Prefix"="DSK"
?? "BlockTransferSize"=dword:40? ; send no more than 64 blocks of data per bus transfer
?? ;"SingleBlockWrites"=dword:1? ; alternatively force the driver to use single block access
?? ;"IdleTimeout"=dword:7D0????? ; milliseconds
?? ;"IdlePowerState"=dword:2???? ; 0 == D0, 1 == D1, etc.
?? ;"DisablePowerManagement"=""? ; if value present, then disable (remove value to enable)
?? "Profile"="MMC"
?? "IClass"=multi_sz:"{A4E7EDDA-E575-4252-9D6B-4195D48BB865}",
???????????????????? "{A32942B7-920C-486b-B0E6-92A702A99B35}"
?
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MMC]
??? "Name"="MMC Memory Card"
??? "Folder"="MMCCard"
??? "PartitionDriverName"="MSPART"
??? "DefaultFileSystem"="FATFS"
??? "BootPhase"=dword:0
?
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MMC\FATFS]
? "MountAsBootable"=dword:1
? "MountAsROM"=dword:1
? "MountAsRoot"=dword:1
? "AutoFormat"=dword:1
? "AutoPart" =dword:1
? "AutoMount"=dword:1
? "BootPhase"=dword:0
?
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\SDMemory]
??? "PartitionDriverName"="MSPART"
??? "Name"="SD Memory Card"
??? "Folder"="SDCard"
??? "DefaultFileSystem"="FATFS"
??? "BootPhase"=dword:0
?
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\SDMemory\FATFS]
;? "MountAsBootable"=dword:1
;? "MountAsROM"=dword:1
;? "MountAsRoot"=dword:1
? "AutoFormat"=dword:1
? "AutoPart" =dword:1
? "AutoMount"=dword:1
? "BootPhase"=dword:0
?
?
[HKEY_LOCAL_MACHINE\Drivers\SDCARD\ClientDrivers\Class\SDMemory_Class\High_Capacity]
?? "Dll"="SDMemory.dll"
?? "Prefix"="DSK"
?? "BlockTransferSize"=dword:40? ; send no more than 64 blocks of data per bus transfer
?? ;"SingleBlockWrites"=dword:1? ; alternatively force the driver to use single block access
?? ;"IdleTimeout"=dword:7D0????? ; 2000 milliseconds
?? ;"IdlePowerState"=dword:2???? ; 0 == D0, 1 == D1, etc.
?? ;"DisablePowerManagement"=""? ; if value present, then disable (remove value to enable)
?? "Profile"="SDMemory"
?? "IClass"=multi_sz:"{A4E7EDDA-E575-4252-9D6B-4195D48BB865}",
???????????????????? "{8DD679CE-8AB4-43c8-A14A-EA4963FAA715}"
?
?
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MMC\BINFS]
??? "MountSystem"=dword:1
??? "MountAsROM"=dword:1
??? "BootPhase"=dword:0
?
; SDHC Memory Storage class driver
[HKEY_LOCAL_MACHINE\Drivers\SDCARD\ClientDrivers\Class\MMC_Class\High_Capacity]
?? "Dll"="SDMemory.dll"
?? "Prefix"="DSK"
?? "BlockTransferSize"=dword:100? ; send no more than 256 blocks of data per bus transfer
?? "Index"=dword:1
?? "BootPhase"=dword:0
?? ;"BlockTransferSize"=dword:40? ; send no more than 64 blocks of data per bus transfer
?? "SDClockRateOverride"=dword:2625A0???????? ; 52000000 Hz
?? ;"SingleBlockWrites"=dword:1? ; alternatively force the driver to use single block access
?? ;"IdleTimeout"=dword:7D0????? ; 2000 milliseconds
?? ;"IdlePowerState"=dword:2???? ; 0 == D0, 1 == D1, etc.
?? ;"DisablePowerManagement"="" ?; if value present, then disable (remove value to enable)
?? "Profile"="MMC"
?? "IClass"=multi_sz:"{A4E7EDDA-E575-4252-9D6B-4195D48BB865}",
???????????????????? "{8DD679CE-8AB4-43c8-A14A-EA4963FAA715}"
?
[HKEY_LOCAL_MACHINE\System\StorageManager\BinFS]
?? ?"BootPhase"=dword:0
??? "Order"=dword:0
??? "FriendlyName"="BIN Filesystem"
??? "Dll"="binfs.dll"
??? "Paging"=dword:1
?
[HKEY_LOCAL_MACHINE\init\BootVars]
?? "SystemHive"="\\Hive\\system.hv"
?? "ProfileDir"="Documents and Settings"
?? "Flags"=dword:3
?? "RegistryFlags"=dword:1
?? "NoDefaultUser"=dword:0
?
; END HIVE BOOT SECTION
總結
以上是生活随笔為你收集整理的在SD/MMC卡上实现hive (Implement WinCE HIVEROM system on NAND or SD system )的全部內容，希望文章能夠幫你解決所遇到的問題。
- 上一篇： __asm__ __volatile__
- 下一篇： S3c2440A WINCE平台HIVE