1、異常分類
從sap 6.10開始，abap的異常分為兩類：1)基于異常類的異常，2)非類異常。非類異常又分為系統定義異常（如：被0除異常）和用戶自定義異常(用戶自定義函數中由exception語句定義，raise語句產生的異常)。

異常有的是可以截獲處理，用戶可以截獲做相應處理，系統將可以繼續執行程序。如果用戶不處理，系統將產生錯誤，并停止執行程序。有的異常為不可截獲的錯誤異常，系統將直接產生錯誤，并停止執行程序。

2、異常處理語句
基于類異常相關語句：
a)TRY.
??... guarded section
CATCH cx11 ... cx1n [INTO ex1].
??... handlers for exceptions cx11 to cx1n
CATCH cx21 ... cx2m [INTO ex2].?
? ... handlers for exceptions cx21 bis cx2m
? ... other handlers
CLEANUP.
??... cleanup block
ENDTRY.

b)RAISE EXCEPTION TYPE class.

c)RAISING cx1 ... cxn


非類異常相關語句：
a)catch system-exceptions ARITHMETIC_ERRORS = 4.
....
endcatch.

c) raise (In function or method)

3、異常截獲處理方法
Handling exceptions using/with exception classes 截獲處理方法
data MYREF type ref to CX_SY_ARITHMETIC_ERROR.
data ERR_TEXT type STRING.
data RESULT type I.
try.
????RESULT = 1 / 0.
??catch cx_sy_arithmetic_error into MYREF.
????ERR_TEXT = MYREF->GET_TEXT( ).
endtry.
Handling exceptions as catchable runtime errors (向后兼容6.10)
此異常處理sap建議使用try...endtry代替(錯誤和異常類對應關系參見第５部分)。
data RESULT type I.
catch system-exceptions ARITHMETIC_ERRORS = 4.
??RESULT = 1 / 0.
endcatch.
if SY-SUBRC = 4.
??...
endif.

４、代碼樣例
a)RAISING cx1 ... cxn
form adbc_exists_view using view_name type dd25l-viewname
????????????????????? changing subrc type sy-subrc
????????????????????? raising cx_sql_exception.

?data: stmt type string,
??????? ref type ref to data,
??????? stmt_ref type ref to cl_sql_statement,
??????? res_ref type ref to cl_sql_result_set,
??????? cnt type sy-tabix.

? subrc = 4.
? create object stmt_ref.
? get reference of view_name into ref.
? stmt_ref->set_param( ref ).
? stmt = 'select count(*) from user_views where view_name = ?'.
? res_ref = stmt_ref->execute_query( stmt ).

* Host-Variable zur Ergebnisaufnahme zuordnen
? get reference of cnt into ref.
? res_ref->set_param( ref ).

? res_ref->next( ).
? if cnt = 1.
??? subrc = 0.
? endif.
? res_ref->close( ).

endform.

form exists_view using??? view_name type dd25l-viewname
???????????????? changing subrc???? type sy-subrc.
? try.
??? perform adbc_exists_view(sdb4fora)
??????????? using view_name
??????????? changing subrc.
? catch cx_sql_exception.
??? subrc = 8.
? endtry.
endform.
b)基于類的異常代碼樣例
5、錯誤與異常類對應關系
Exception group: ARITHMETIC_ERRORS

Class-based Exceptions Definition

*----------------------------------------------------------------------* * CLASS class_exception DEFINITION *----------------------------------------------------------------------* * All Exception Class must inherit from Class CX_ROOT or its subclass *----------------------------------------------------------------------* CLASS class_exception DEFINITION INHERITING FROM cx_static_check.PUBLIC SECTION.METHODS write_msg.ENDCLASS. "CX_SAMPLE_EXCEPTION DEFINITION

Class-based Exceptions Implementation

*----------------------------------------------------------------------* * CLASS class_exception IMPLEMENTATION *----------------------------------------------------------------------* CLASS class_exception IMPLEMENTATION.METHOD write_msg.WRITE / 'Method of Class class_exception'.ENDMETHOD. ": ENDCLASS. "class_exception IMPLEMENTATION

Class main Definition

*----------------------------------------------------------------------* * CLASS main DEFINITION *----------------------------------------------------------------------* CLASS main DEFINITION.PUBLIC SECTION. * This method use the class exceptions class_exception * to deal with error. To do this we use the statement RAISINGMETHODS action RAISING class_exception.ENDCLASS. "main DEFINITION

Class main Implementation

*----------------------------------------------------------------------* * CLASS main IMPLEMENTATION *----------------------------------------------------------------------* CLASS main IMPLEMENTATION.METHOD action.* Here we're raising an exception that should be Treated by * exception class class_exceptionRAISE EXCEPTION TYPE class_exception.ENDMETHOD. "action ENDCLASS. "main IMPLEMENTATION

Defining Objects

DATA o_exception TYPE REF TO class_exception. DATA o_main TYPE REF TO main.

Instance Creation

START-OF-SELECTION.CREATE OBJECT o_main.

Calling Methods

* The statement TRY must be used to define a block that CATCH the exceptionsTRY.o_main->action( ).* The Statement CATCH define a block that catches the exceptions of the * exception class class_exceptionCATCH class_exception.WRITE / 'Exception Caught'.ENDTRY.* The statement TRY must be used to define a block that CATCH the exceptionsTRY.o_main->action( ).* The Statement CATCH define a block that catches the exceptions of the * exception class class_exceptionCATCH class_exception INTO o_exception.WRITE / 'Exception Caught'.o_exception->write_msg( ).ENDTRY.

?

(Associated superclass: CX_SY_ARITHMETIC_ERROR)

BCD_ZERODIVIDE	CX_SY_ZERODIVIDE
COMPUTE_FLOAT_ZERODIVIDE	CX_SY_ZERODIVIDE
COMPUTE_INT_ZERODIVIDE	CX_SY_ZERODIVIDE
ADDF_INT_OVERFLOW	CX_SY_ARITHMETIC_OVERFLOW
BCD_OVERFLOW	CX_SY_ARITHMETIC_OVERFLOW
COMPUTE_BCD_OVERFLOW	CX_SY_ARITHMETIC_OVERFLOW
COMPUTE_COSH_OVERFLOW	CX_SY_ARITHMETIC_OVERFLOW
COMPUTE_EXP_RANGE	CX_SY_ARITHMETIC_OVERFLOW
COMPUTE_FLOAT_DIV_OVERFLOW	CX_SY_ARITHMETIC_OVERFLOW
COMPUTE_FLOAT_MINUS_OVERFLOW	CX_SY_ARITHMETIC_OVERFLOW
COMPUTE_FLOAT_PLUS_OVERFLOW	CX_SY_ARITHMETIC_OVERFLOW
COMPUTE_FLOAT_TIMES_OVERFLOW	CX_SY_ARITHMETIC_OVERFLOW
COMPUTE_INT_ABS_OVERFLOW	CX_SY_ARITHMETIC_OVERFLOW
COMPUTE_INT_DIV_OVERFLOW	CX_SY_ARITHMETIC_OVERFLOW
COMPUTE_INT_MINUS_OVERFLOW	CX_SY_ARITHMETIC_OVERFLOW
COMPUTE_INT_PLUS_OVERFLOW	CX_SY_ARITHMETIC_OVERFLOW
COMPUTE_INT_TIMES_OVERFLOW	CX_SY_ARITHMETIC_OVERFLOW
COMPUTE_LOG10_ERROR	CX_SY_ARITHMETIC_OVERFLOW, CX_SY_ARG_OUT_OF_DOMAIN
COMPUTE_LOG_ERROR	CX_SY_ARITHMETIC_OVERFLOW, CX_SY_ARG_OUT_OF_DOMAIN
COMPUTE_MATH_OVERFLOW	CX_SY_ARITHMETIC_OVERFLOW
COMPUTE_POW_RANGE	CX_SY_ARITHMETIC_OVERFLOW
COMPUTE_SINH_OVERFLOW	CX_SY_ARITHMETIC_OVERFLOW
COMPUTE_ACOS_DOMAIN	CX_SY_ARG_OUT_OF_DOMAIN
COMPUTE_ASIN_DOMAIN	CX_SY_ARG_OUT_OF_DOMAIN
COMPUTE_ATAN_DOMAIN	CX_SY_ARG_OUT_OF_DOMAIN
COMPUTE_COSH_DOMAIN	CX_SY_ARG_OUT_OF_DOMAIN
COMPUTE_COS_DOMAIN	CX_SY_ARG_OUT_OF_DOMAIN
COMPUTE_EXP_DOMAIN	CX_SY_ARG_OUT_OF_DOMAIN
COMPUTE_MATH_DOMAIN	CX_SY_ARG_OUT_OF_DOMAIN
COMPUTE_POW_DOMAIN	CX_SY_ARG_OUT_OF_DOMAIN
COMPUTE_SINH_DOMAIN	CX_SY_ARG_OUT_OF_DOMAIN
COMPUTE_SIN_DOMAIN	CX_SY_ARG_OUT_OF_DOMAIN
COMPUTE_SQRT_DOMAIN	CX_SY_ARG_OUT_OF_DOMAIN
COMPUTE_TANH_DOMAIN	CX_SY_ARG_OUT_OF_DOMAIN
COMPUTE_COS_LOSS	CX_SY_PRECISION_LOSS
COMPUTE_MATH_LOSS	CX_SY_PRECISION_LOSS
COMPUTE_SIN_LOSS	CX_SY_PRECISION_LOSS
COMPUTE_TAN_LOSS	CX_SY_PRECISION_LOSS
BCD_FIELD_OVERFLOW	CX_SY_CONVERSION_OVERFLOW
?

Exception group: CONVERSION_ERRORS

(Associated superclass: CX_SY_CONVERSION_ERROR)

BCD_FIELD_OVERFLOW	CX_SY_CONVERSION_OVERFLOW
CONVT_OVERFLOW	CX_SY_CONVERSION_OVERFLOW
CONVT_CODEPAGE	CX_SY_CONVERSION_CODEPAGE
CONVT_NO_NUMBER	CX_SY_CONVERSION_NO_NUMBER
BCD_OVERFLOW	CX_SY_ARITHMETIC_OVERFLOW
?

Exception group: CREATE_DATA_ERRORS

(Associated superclass: CX_SY_CREATE_ERROR)

This group contains runtime errors that may occur during the creation of data objects.

CREATE_DATA_UNKNOWN_TYPE	CX_SY_CREATE_DATA_ERROR
CREATE_DATA_NOT_ALLOWED_TYPE	CX_SY_CREATE_DATA_ERROR
CREATE_DATA_LEN_NOT_ALLOWED	CX_SY_CREATE_DATA_ERROR
CREATE_DATA_ILLEGAL_LENGTH	CX_SY_CREATE_DATA_ERROR
CREATE_DATA_ILLEGAL_DECIMALS	CX_SY_CREATE_DATA_ERROR
CREATE_DATA_ILLEGAL_INIT_SIZE	CX_SY_CREATE_DATA_ERROR
?

Exception group: CREATE_OBJECT_ERRORS

(Associated superclass: CX_SY_CREATE_ERROR)

This group contains runtime errors that may occur during the creation of objects.

CREATE_OBJECT_CLASS_NOT_FOUND	CX_SY_CREATE_OBJECT_ERROR
CREATE_OBJECT_CLASS_ABSTRACT	CX_SY_CREATE_OBJECT_ERROR
CREATE_OBJECT_CREATE_PRIVATE	CX_SY_CREATE_OBJECT_ERROR
CREATE_OBJECT_CREATE_PROTECTED	CX_SY_CREATE_OBJECT_ERROR
?

Exception group: DATA_ACCESS_ERRORS

(Associated superclass: CX_SY_DATA_ACCESS_ERROR)

This group contains runtime errors that may occur during subfield access (with offset/length) to data objects.

DATA_OFFSET_NEGATIVE	CX_SY_RANGE_OUT_OF_BOUNDS
DATA_LENGTH_NEGATIVE	CX_SY_RANGE_OUT_OF_BOUNDS
DATA_LENGTH_0	CX_SY_RANGE_OUT_OF_BOUNDS
DATA_LENGTH_TOO_LARGE	CX_SY_RANGE_OUT_OF_BOUNDS
DATA_OFFSET_LENGTH_TOO_LARGE	CX_SY_RANGE_OUT_OF_BOUNDS
REFI_WRONG_SECTION	CX_SY_RANGE_OUT_OF_BOUNDS
STRING_OFFSET_NEGATIVE	CX_SY_RANGE_OUT_OF_BOUNDS
STRING_OFFSET_TOO_LARGE	CX_SY_RANGE_OUT_OF_BOUNDS
STRING_LENGTH_NEGATIVE	CX_SY_RANGE_OUT_OF_BOUNDS
STRING_LENGTH_TOO_LARGE	CX_SY_RANGE_OUT_OF_BOUNDS
STRING_OFFSET_LENGTH_TOO_LARGE	CX_SY_RANGE_OUT_OF_BOUNDS
DATA_OFFSET_LENGTH_NOT_ALLOWED	CX_SY_OFFSET_NOT_ALLOWED
?

Since a subfield access can occur in almost all statements, no keywords can be assigned.

Exception group: DYNAMIC_CALL_METHOD_ERRORS

(Associated superclass: CX_SY_DYN_CALL_ERROR)

This group contains runtime errors that may occur during a dynamic method call. These are normally errors that trigger a syntax error if the call is static.

DYN_CALL_METH_CLASS_ABSTRACT	CX_SY_DYN_CALL_ILLEGAL_CLASS
DYN_CALL_METH_CLASS_NOT_FOUND	CX_SY_DYN_CALL_ILLEGAL_CLASS
DYN_CALL_METH_CLASSCONSTRUCTOR	CX_SY_DYN_CALL_ILLEGAL_METHOD
DYN_CALL_METH_CONSTRUCTOR	CX_SY_DYN_CALL_ILLEGAL_METHOD
DYN_CALL_METH_NOT_FOUND	CX_SY_DYN_CALL_ILLEGAL_METHOD
DYN_CALL_METH_NO_CLASS_METHOD	CX_SY_DYN_CALL_ILLEGAL_METHOD
DYN_CALL_METH_PRIVATE	CX_SY_DYN_CALL_ILLEGAL_METHOD
DYN_CALL_METH_PROTECTED	CX_SY_DYN_CALL_ILLEGAL_METHOD
DYN_CALL_METH_EXCP_NOT_FOUND	CX_SY_DYN_CALL_EXCP_NOT_FOUND
DYN_CALL_METH_PARAM_KIND	CX_SY_DYN_CALL_ILLEGAL_TYPE
DYN_CALL_METH_PARAM_LITL_MOVE	CX_SY_DYN_CALL_ILLEGAL_TYPE
DYN_CALL_METH_PARAM_TAB_TYPE	CX_SY_DYN_CALL_ILLEGAL_TYPE
DYN_CALL_METH_PARAM_TYPE	CX_SY_DYN_CALL_ILLEGAL_TYPE
DYN_CALL_METH_PARAM_MISSING	CX_SY_DYN_CALL_PARAM_MISSING
DYN_CALL_METH_PARREF_INITIAL	CX_SY_DYN_CALL_PARAM_MISSING
DYN_CALL_METH_PARAM_NOT_FOUND	CX_SY_DYN_CALL_PARAM_NOT_FOUND
DYN_CALL_METH_REF_IS_INITIAL	CX_SY_REF_IS_INITIAL
?

The following keywords are assigned to this exception group:

CALL METHOD

Exception group: FILE_ACCESS_ERRORS

(Associated superclass: CX_SY_FILE_ACCESS_ERROR)

This group contains runtime errors that may occur during file access. Typical examples are if the system cannot find the file, if no more space is available to write or create the file, or if the authorization to access the file is missing.

DATASET_CANT_CLOSE	CX_SY_FILE_CLOSE
DATASET_CANT_OPEN	CX_SY_FILE_OPEN
EXPORT_DATASET_CANNOT_OPEN	CX_SY_FILE_OPEN
DATASET_WRITE_ERROR	CX_SY_FILE_IO
DATASET_READ_ERROR	CX_SY_FILE_IO
EXPORT_DATASET_WRITE_ERROR	CX_SY_FILE_IO
DATASET_SEEK_ERROR	CX_SY_FILE_POSITION
DATASET_NO_POSITION	CX_SY_FILE_POSITION
DATASET_READ_ONLY	CX_SY_FILE_OPEN_MODE
DATASET_NOT_OPEN	CX_SY_FILE_OPEN_MODE
OPEN_DATASET_NO_AUTHORITY	CX_SY_FILE_AUTHORITY
OPEN_PIPE_NO_AUTHORITY	CX_SY_FILE_AUTHORITY
DATASET_TOO_MANY_FILES	CX_SY_TOO_MANY_FILES
DATASET_NO_PIPE	CX_SY_PIPES_NOT_SUPPORTED
?

Exception group: IMPORT_MISMATCH_ERRORS

(Common class: CX_SY_IMPORT_MISMATCH_ERROR)

This group contains runtime errors that may occur during the import of data

• from the ABAP memory,

• from the database,

• from the SHARED BUFFER, or

• from a file

if the type or the length of the data stored is not identical with that of the target type.

CONNE_IMPORT_WRONG_COMP_DECS	CX_SY_IMPORT_MISMATCH_ERROR
CONNE_IMPORT_WRONG_COMP_LENG	CX_SY_IMPORT_MISMATCH_ERROR
CONNE_IMPORT_WRONG_COMP_TYPE	CX_SY_IMPORT_MISMATCH_ERROR
CONNE_IMPORT_WRONG_FIELD_DECS	CX_SY_IMPORT_MISMATCH_ERROR
CONNE_IMPORT_WRONG_FIELD_LENG	CX_SY_IMPORT_MISMATCH_ERROR
CONNE_IMPORT_WRONG_FIELD_TYPE	CX_SY_IMPORT_MISMATCH_ERROR
CONNE_IMPORT_WRONG_OBJECT_TYPE	CX_SY_IMPORT_MISMATCH_ERROR
CONNE_IMPORT_WRONG_STRUCTURE	CX_SY_IMPORT_MISMATCH_ERROR
IMPORT_ALIGNMENT_MISMATCH	CX_SY_IMPORT_MISMATCH_ERROR
IMPORT_WRONG_END_POS	CX_SY_IMPORT_MISMATCH_ERROR
?

Exception group: LOCALIZATION_ERRORS

(Common class: CX_SY_LOCALIZATION_ERROR)

This group contains runtime errors that may occur when you switch to another text environment. Typical examples are if the required language is not allowed or if the system wants to switch to a character set which has not been released.

TEXTENV_CODEPAGE_NOT_ALLOWED	CX_SY_LOCALIZATION_ERROR
TEXTENV_INVALID	CX_SY_LOCALIZATION_ERROR
TEXTENV_KEY_INVALID	CX_SY_LOCALIZATION_ERROR
?

Exception group: REMOTE_CALL_ERRORS

(Associated superclass: CX_SY_REMOTE_CALL_ERROR)

This group contains runtime errors that may occur during calls in remote systems (currently only CALL METHOD). Typical examples are network errors or the unexpected termination of the connection.

RMC_COMMUNICATION_FAILURE	CX_SY_RMC_COMM_FAILURE
RMC_INVALID_STATUS	CX_SY_RMC_INVALID_STATUS
RMC_SYSTEM_FAILURE	CX_SY_RMC_SYSTEM_FAILURE
?

CALL METHOD

Not assigned to an exception group:

ASSIGN_CASTING_ILLEGAL_CAST	CX_SY_ASSIGN_CAST_ILLEGAL_CAST
ASSIGN_CASTING_UNKNOWN_TYPE	CX_SY_ASSIGN_CAST_UNKNOWN_TYPE
ASSIGN_FIELD_NOT_IN_RANGE	CX_SY_ASSIGN_OUT_OF_RANGE
DATASET_OFFSET_TOO_LARGE	CX_SY_FILE_POSITION
DYN_CALL_METH_NOT_IMPLEMENTED	CX_SY_DYN_CALL_ILLEGAL_METHOD
EXPORT_BUFFER_NO_MEMORY	CX_SY_EXPORT_BUFFER_NO_MEMORY
GENERATE_SUBPOOL_DIR_FULL	CX_SY_GENERATE_SUBPOOL_FULL
MOVE_CAST_ERROR	CX_SY_MOVE_CAST_ERROR
PERFORM_PROGRAM_NAME_TOO_LONG	CX_SY_PROGRAM_NOT_FOUND
REPLACE_INFINITE_LOOP	CX_SY_REPLACE_INFINITE_LOOP

?6、類異常類樹
CX_SY_ROOT
??|
??|--CX_STATIC_CHECK
??|
??|--CX_DYNAMIC_CHECK
??|????|
??|????|--CX_SY_ARITHMETIC_ERROR
??|????|????|
??|????|????|--CX_SY_ZERODIVIDE
??|????|????|
??|????|????|--CX_SY_ARITHMETIC_OVERFLOW
??|????|????|
??|????|????|--CX_SY_ARG_OUT_OF_DOMAIN
??|????|????|
??|????|????|--CX_SY_PRECISION_LOSS
??|????|
??|????|--CX_SY_ASSIGN_ERROR
??|????|????|
??|????|????|--CX_SY_ASSIGN_CAST_ERROR
??|????|????|????|
??|????|????|????|--CX_SY_ASSIGN_CAST_ILLEGAL_CAST
??|????|????|????|
??|????|????|????|--CX_SY_ASSIGN_CAST_UNKNOWN_TYPE
??|????|????|
??|????|????|--CX_SY_ASSIGN_OUT_OF_RANGE
??|????|
??|????|--CX_SY_CODEPAGE_CONVERTER_INIT
??|????|
??|????|--CX_SY_CONVERSION_ERROR
??|????|????|
??|????|????|--CX_SY_CONVERSION_OVERFLOW
??|????|????|
??|????|????|--CX_SY_CONVERSION_NO_NUMBER
??|????|????|
??|????|????|--CX_SY_CONVERSION_CODEPAGE
??|????|????|
??|????|????|--CX_SY_CONVERSION_BASE64
??|????|????|
??|????|????|--CX_SY_CONV_ILLEGAL_DATE_TIME
??|????|
??|????|--CX_SY_CREATE_ERROR
??|????|????|
??|????|????|--CX_SY_CREATE_OBJECT_ERROR
??|????|????|
??|????|????|--CX_SY_CREATE_DATA_ERROR
??|????|
??|????|--CX_SY_DATA_ACCESS_ERROR
??|????|????|
??|????|????|--CX_SY_RANGE_OUT_OF_BOUNDS
??|????|????|
??|????|????|--CX_SY_OFFSET_NOT_ALLOWED
??|????|
??|????|--CX_SY_DYN_CALL_ERROR
??|????|????|
??|????|????|--CX_SY_DYN_CALL_ILLEGAL_CLASS
??|????|????|
??|????|????|--CX_SY_DYN_CALL_ILLEGAL_FUNC
??|????|????|
??|????|????|--CX_SY_DYN_CALL_ILLEGAL_METHOD
??|????|????|
??|????|????|--CX_SY_DYN_CALL_PARAMETER_ERROR
??|????|???????? |
??|????|???????? |--CX_SY_DYN_CALL_EXCP_NOT_FOUND
??|????|???????? |
??|????|???????? |--CX_SY_DYN_CALL_ILLEGAL_TYPE
??|????|???????? |
??|????|???????? |--CX_SY_DYN_CALL_PARAM_MISSING
??|????|???????? |
??|????|???????? |--CX_SY_DYN_CALL_PARAM_NOT_FOUND
??|????|
??|????|--CX_SY_FILE_ACCESS_ERROR
??|????|????|
??|????|????|--CX_SY_FILE_AUTHORITY
??|????|????|
??|????|????|--CX_SY_FILE_CLOSE
??|????|????|
??|????|????|--CX_SY_FILE_IO
??|????|????|
??|????|????|--CX_SY_FILE_POSITION
??|????|????|
??|????|????|--CX_SY_FILE_OPEN_MODE
??|????|????|
??|????|????|--CX_SY_FILE_OPEN
??|????|
??|????|--CX_SY_GEN_SOURCE_TOO_WIDE
??|????|
??|????|--CX_SY_IMPORT_MISMATCH_ERROR
??|????|
??|????|--CX_SY_MOVE_CAST_ERROR
??|????|
??|????|--CX_SY_PROGRAM_NOT_FOUND
??|????|
??|????|--CX_SY_PROVIDE_EXCEPTION
??|????|????|
??|????|????|--CX_SY_PROVIDE_INTERVAL_OVERLAP
??|????|????|
??|????|????|--CX_SY_PROVIDE_TABLE_NOT_SORTED
??|????|
??|????|--CX_SY_READ_SRC_LINE_TOO_LONG
??|????|
??|????|--CX_SY_REF_IS_INITIAL
??|????|
??|????|--CX_SY_REPLACE_INFINITE_LOOP
??|????|
??|????|--CX_SY_SCAN_SOURCE_TOO_WIDE
??|????|
??|????|--CX_SY_SQL_ERROR
??|????|????|
??|????|????|--CX_SY_OPEN_SQL_ERROR
??|????|????|????|
??|????|????|????|--CX_SY_OPEN_SQL_DB
??|????|????|????|
??|????|????|????|--CX_SY_DYNAMIC_OSQL_ERROR
??|????|????|???????? |
??|????|????|???????? |--CX_SY_DYNAMIC_OSQL_SEMANTICS
??| ???|????|???????? |
??|????|????|???????? |--CX_SY_DYNAMIC_OSQL_SYNTAX
??|????|????|
??|????|????|--CX_SY_NATIVE_SQL_ERROR
??|????|
??|????|--CX_SY_WRITE_SRC_LINE_TOO_LONG
??|
??|--CX_NO_CHECK
?????? |
?????? |--CX_SY_EXPORT_NO_SHARED_MEMORY
?????? |
?????? |--CX_SY_EXPORT_BUFFER_NO_MEMORY
?????? |
?????? |--CX_SY_GENERATE_SUBPOOL_FULL
?????? |
?????? |--CX_SY_LOCALIZATION_ERROR
?????? |
?????? |--CX_SY_NO_HANDLER
?????? |
?????? |--CX_SY_PIPES_NOT_SUPPORTED
?????? |
?????? |--CX_SY_PIPE_REOPEN
?????? |
?????? |--CX_SY_REMOTE_CALL_ERROR
?????? |????|
?????? |????|--CX_SY_RMC_COMM_FAILURE
?????? |????|
?????? |????|--CX_SY_RMC_INVALID_STATUS
?????? |????|
?????? |????|--CX_SY_RMC_SYSTEM_FAILURE
?????? |
?????? |--CX_SY_TOO_MANY_FILES

總結

以上是生活随笔為你收集整理的abap--关于异常的处理的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。