1. 顯示當前主機目錄

命令df -h

[root@localhost ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup-lv_root26G 2.9G 22G 13% / tmpfs 1.9G 0 1.9G 0% /dev/shm /dev/xvda1 485M 32M 428M 7% /boot

2. 磁盤分區

2.1 顯示機器當前的磁盤:

命令fdisk -l

[root@localhost ~]# fdisk -l /dev/xvdb Disk /dev/xvdb: 53.7 GB, 53687091200 bytes 255 heads, 63 sectors/track, 6527 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000

注:這里知道新增磁盤為/dev/xvdb,就直接指定了,縮減顯示篇幅。

2.2 fdisk 分區 /dev/xvdb:

fdisk /dev/xvdb?根據幫助提示分區,這里是把/dev/xvdb分成一個區.

[root@localhost ~]# fdisk /dev/xvdb Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel Building a new DOS disklabel with disk identifier 0x0adfd119. Changes will remain in memory only, until you decide to write them. After that, of course, the previous content won't be recoverable.Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)WARNING: DOS-compatible mode is deprecated. It's strongly recommended toswitch off the mode (command 'c') and change display units tosectors (command 'u').Command (m for help): m Command action a toggle a bootable flag b edit bsd disklabel c toggle the dos compatibility flag d delete a partition l list known partition types m print this menu n add a new partition o create a new empty DOS partition table p print the partition table q quit without saving changes s create a new empty Sun disklabel t change a partition's system id u change display/entry units v verify the partition table w write table to disk and exit x extra functionality (experts only) Command (m for help): n Command action e extended p primary partition (1-4) p Partition number (1-4): 1 First cylinder (1-6527, default 1): Using default value 1 Last cylinder, +cylinders or +size{K,M,G} (1-6527, default 6527): Using default value 6527 Command (m for help): p Disk /dev/xvdb: 53.7 GB, 53687091200 bytes 255 heads, 63 sectors/track, 6527 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0adfd119 Device Boot Start End Blocks Id System /dev/xvdb1 1 6527 52428096 83 Linux Command (m for help): w The partition table has been altered! Calling ioctl() to re-read partition table. Syncing disks.

3. 磁盤格式化

命令mkfs.ext4 /dev/xvdb1分區為ext4的文件系統格式。

[root@localhost ~]# mkfs.ext4 /dev/xvdb1 mke2fs 1.41.12 (17-May-2010) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=0 blocks, Stripe width=0 blocks 3276800 inodes, 13107024 blocks 655351 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=4294967296 400 block groups 32768 blocks per group, 32768 fragments per group 8192 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000, 7962624, 11239424 Writing inode tables: done Creating journal (32768 blocks): done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 28 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override.

4.掛載目錄

4.1 手工掛載

新建目錄/u01mkdir -p /u01
掛載設備到目錄/u01mount /dev/xvdb1 /u01

[root@localhost ~]# mkdir -p /u01 [root@localhost ~]# mount /dev/xvdb1 /u01

4.2 開機自動掛載

修改/etc/fstab配置文件,末尾添加一行:

/dev/xvdb1 /u01 ext4 defaults 0 0

顯示當前目錄,已成功掛載/u01目錄:

[root@localhost ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup-lv_root26G 2.9G 22G 13% / tmpfs 1.9G 0 1.9G 0% /dev/shm /dev/xvda1 485M 32M 428M 7% /boot /dev/xvdb1 50G 180M 47G 1% /u01

參考文章：http://www.cnblogs.com/jyzhao/p/4778657.html

轉載于:https://www.cnblogs.com/weifeng1463/p/7807901.html

總結

以上是生活随笔為你收集整理的Linux 磁盘分区、格式化、目录挂载的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。