當前位置：首頁 > 运维知识 > windows >内容正文

windows

【转载】android客服端+eps8266+单片机+路由器之远程控制系统

發布時間：2025/3/15 windows 19 豆豆

生活随笔收集整理的這篇文章主要介紹了【转载】android客服端+eps8266+单片机+路由器之远程控制系统小編覺得挺不錯的,現在分享給大家,幫大家做個參考.

用android客服端+eps8266+單片機+路由器做了一個遠程控制的系統，因為自己是在實驗室里，所以把實驗室的門，燈做成了遠程控制的。

控制距離有多遠------只能說很遠很遠，只要你手機能上網的地方，不對應該是只要能打電話的地方，不對應該是只要是移動網（我用的是移動的卡）覆蓋的地方，

這篇只說明怎么樣才能實現遠程通信（在路由器上怎樣設置，wifi模塊eps8266怎樣設置），最后會貼上單片機，android的源碼

請事先參考我的前幾篇文章

android之WIFI小車編程詳述，

android 之TCP客戶端編程

ESP8266使用詳解

有人的設置方法介紹

http://www.usr.cn/Faq/146.html

http://www.usr.cn/Faq/148.html

另外

在ESP8266使用詳解中介紹過它的連接路由器的模式，讓它連接上路由器后需要做一些設置

我做的手機tcp客服端

關于上面的遠程與近程連接

遠程連接：

當手機是2G，3G，4G上網的時候，或者，連接了wifi模塊所連接的路由器的時候，或者所連接的路由器橋接了wifi模塊所連接的路由器。

遠程連接服務器ip是路由器的公網ip

對于通信端口號是設置wifi模塊所監聽的端口號（它通信的端口號）

unsigned char code CIPSERVER[]="AT+CIPSERVER=1,10000\r\n";//開啟服務器模式，端口號10000

?近程連接：

因為我設置了wifi模塊AP?兼?Station?模式，所以模塊會發出無線信號，我連接它的wifi信號也能完成通信，只不過連接它的wifi信號后，要連接的ip地址為192.168.4.1

好了附上單片機程序，本來我設置了返回數據，但是因為我的燈和門并沒有加檢測所以后來就去掉了

#define _MAIN_C_ #include "include.h" sbit L1 = P1^0; sbit L2 = P1^1; sbit L3 = P1^2; sbit L4 = P1^3; sbit kaiguan = P1^4; sbit led1 = P1^5; sbit led2 = P1^6; //AP unsigned char code CWMODE2[]="AT+CWMODE=2\r\n"; //設置模塊的工作的模式為AP模式 //多連接ap+station模式 unsigned char code CWMODE3[]="AT+CWMODE=3\r\n"; //設置模塊的工作的模式為ap+station模式 unsigned char code CWJAP[]="AT+CWJAP=\"TP-LINK_9750\",\"56565888\"\r\n";//設置連接的路由器 unsigned char code RST[]="AT+RST\r\n"; //重啟模塊使AT+CWMODE模式生效 unsigned char code CIPMUX[]="AT+CIPMUX=1\r\n"; //啟動多連接 unsigned char code CIPSERVER[]="AT+CIPSERVER=1,10000\r\n";//開啟服務器模式，端口號10000 //微秒延時 /* void us_delay(unsigned char t) { while(t--); } */ //ms秒延時 void Delay_ms(unsigned long ms) { unsigned char i, j,k; for(k=0;k<ms;k++) { _nop_(); _nop_(); i = 22; j = 128; do { while (--j); } while (--i); } } void delay1s(void) //誤差 -0.00000000024us { unsigned char a,b,c; for(c=95;c>0;c--) for(b=26;b>0;b--) for(a=185;a>0;a--); } //ESP8266設置 void ESP8266_Set(unsigned char *puf) { while(*puf!='\0') { Send_Uart(*puf); puf++; } } //多連接AP模式 void ManyConnect_AP() { P1=0xff; //模式ap while(1) { ESP8266_Set(CWMODE2);//返回ok delay1s(); if(Usart_AT_flage ==1) { if(strstr(Usart_Receive, "OK") ) { Usart_AT_flage = 0; L1 = 0; break; } } } //復位 ESP8266_Set(RST);//返回一大溜，不用判斷返回 delay1s(); delay1s(); //多連接 while(1) { ESP8266_Set(CIPMUX);//返回ok delay1s(); if(Usart_AT_flage ==1) { if(strstr(Usart_Receive, "OK") ) { Usart_AT_flage = 0; L2 = 0; break; } } } //啟動TCP服務 while(1) { ESP8266_Set(CIPSERVER);//返回ok，多了也返回ok delay1s(); if(Usart_AT_flage ==1) { if(strstr(Usart_Receive, "OK") ) { Usart_AT_flage = 0; L3 = 0; break; } } } } //多連接AP+Station 模式 void ManyConnect_ap_Station() { P1=0xff; //模式3 while(1) { ESP8266_Set(CWMODE3);//返回ok delay1s(); if(Usart_AT_flage ==1)//接收完成 { if(strstr(Usart_Receive, "OK") ) { Usart_AT_flage = 0; L1 = 0; break; } } } //連接路由 while(1) { //復位 ESP8266_Set(RST);//返回一大溜，不用判斷返回 delay1s(); delay1s(); delay1s(); delay1s(); ESP8266_Set(CWJAP);//返回ok delay1s(); delay1s(); delay1s(); delay1s(); delay1s(); delay1s(); delay1s(); delay1s(); delay1s(); delay1s(); delay1s(); delay1s(); delay1s(); delay1s(); if(Usart_AT_flage ==1) { if(strstr(Usart_Receive, "OK") ) { Usart_AT_flage = 0; L2 = 0; break; } } } //多連接 while(1) { ESP8266_Set(CIPMUX);//返回ok delay1s(); if(Usart_AT_flage ==1) { if(strstr(Usart_Receive, "OK") ) { Usart_AT_flage = 0; L3 = 0; break; } } } //啟動TCP服務 while(1) { ESP8266_Set(CIPSERVER);//返回ok，多了也返回ok delay1s(); if(Usart_AT_flage ==1) { if(strstr(Usart_Receive, "OK") ) { Usart_AT_flage = 0; L4 = 0; break; } } } } void delay1s500ms(void) //誤差 -0.000000000341us { unsigned char a,b,c; for(c=123;c>0;c--) for(b=212;b>0;b--) for(a=25;a>0;a--); } void main() { int i; InitUART(); while(1) { //ManyConnect_AP();//多連接AP模式 ManyConnect_ap_Station();//多連接AP+station模式 while(1) { //由于消息的開頭是+IP 故做此判斷，00000000000000000號 if((Usart_Receive[0]=='+')&&(Usart_Receive[1]=='I')&&(Usart_Receive[2]=='P')) { if((Usart_Receive[3]=='D')&&(Usart_Receive[5]=='0')&&(Usart_Receive[6]==',')) { if(Usart_Receive[9]=='1') { kaiguan = 0; delay1s500ms(); kaiguan = 1; delay1s(); for(i = 0 ; i<20; i++) { Usart_Receive[i]=' '; } //ESP8266_Set("AT+CIPSEND=0,1\r\n"); //delay1s(); //ESP8266_Set("1");//向服務器發送數據 //delay1s(); //ESP8266_Set("AT+CIPSEND=0,1\r\n"); //delay1s(); //ESP8266_Set("1");//向服務器發送數據 } if(Usart_Receive[9]=='2') { kaiguan = 0; delay1s500ms(); kaiguan = 1; delay1s(); for(i = 0 ; i<20; i++) { Usart_Receive[i]=' '; } //ESP8266_Set("AT+CIPSEND=0,1\r\n"); //delay1s(); //ESP8266_Set("2");//向服務器發送數據 //delay1s(); //ESP8266_Set("AT+CIPSEND=0,1\r\n"); //delay1s(); //ESP8266_Set("2");//向服務器發送數據 } if(Usart_Receive[9]=='3') { led1 = 0; delay1s(); delay1s(); //ESP8266_Set("AT+CIPSEND=0,1\r\n"); //delay1s(); //ESP8266_Set("3");//向服務器發送數據 //ESP8266_Set("AT+CIPSEND=0,1\r\n"); //delay1s(); //ESP8266_Set("3");//向服務器發送數據 } if(Usart_Receive[9]=='4') { led1 = 1; delay1s(); delay1s(); /* ESP8266_Set("AT+CIPSEND=0,1\r\n"); delay1s(); ESP8266_Set("4");//向服務器發送數據 ESP8266_Set("AT+CIPSEND=0,1\r\n"); delay1s(); ESP8266_Set("4");//向服務器發送數據*/ } if(Usart_Receive[9]=='5') { led2 = 0; delay1s(); delay1s(); /* ESP8266_Set("AT+CIPSEND=0,1\r\n"); delay1s(); ESP8266_Set("5");//向服務器發送數據 ESP8266_Set("AT+CIPSEND=0,1\r\n"); delay1s(); ESP8266_Set("5");//向服務器發送數據/*/ } if(Usart_Receive[9]=='6') { led2 = 1; delay1s(); delay1s(); /* ESP8266_Set("AT+CIPSEND=0,1\r\n"); delay1s(); ESP8266_Set("6");//向服務器發送數據 ESP8266_Set("AT+CIPSEND=0,1\r\n"); delay1s(); ESP8266_Set("6");//向服務器發送數據*/ } } } //由于消息的開頭是+IP 故做此判斷，111111111111111111111號 if((Usart_Receive[0]=='+')&&(Usart_Receive[1]=='I')&&(Usart_Receive[2]=='P')) { if((Usart_Receive[3]=='D')&&(Usart_Receive[5]=='1')&&(Usart_Receive[6]==',')) { if(Usart_Receive[9]=='1') { kaiguan = 0; delay1s500ms(); kaiguan = 1; delay1s(); for(i = 0 ; i<20; i++) { Usart_Receive[i]=' '; } } if(Usart_Receive[9]=='2') { kaiguan = 0; delay1s500ms(); kaiguan = 1; delay1s(); for(i = 0 ; i<20; i++) { Usart_Receive[i]=' '; } } if(Usart_Receive[9]=='3') { led1 = 0; delay1s();delay1s(); } if(Usart_Receive[9]=='4') { led1 = 1; delay1s();delay1s(); } if(Usart_Receive[9]=='5') { led2 = 0; delay1s();delay1s(); } if(Usart_Receive[9]=='6') { led2 = 1; delay1s();delay1s(); } } } //由于消息的開頭是+IP 故做此判斷，222222222222222號 if((Usart_Receive[0]=='+')&&(Usart_Receive[1]=='I')&&(Usart_Receive[2]=='P')) { if((Usart_Receive[3]=='D')&&(Usart_Receive[5]=='2')&&(Usart_Receive[6]==',')) { if(Usart_Receive[9]=='1') { kaiguan = 0; delay1s500ms(); kaiguan = 1; delay1s(); for(i = 0 ; i<20; i++) { Usart_Receive[i]=' '; } } if(Usart_Receive[9]=='2') { kaiguan = 0; delay1s500ms(); kaiguan = 1; delay1s(); for(i = 0 ; i<20; i++) { Usart_Receive[i]=' '; } } if(Usart_Receive[9]=='3') { led1 = 0; delay1s();delay1s(); } if(Usart_Receive[9]=='4') { led1 = 1; delay1s();delay1s(); } if(Usart_Receive[9]=='5') { led2 = 0; delay1s();delay1s(); } if(Usart_Receive[9]=='6') { led2 = 1; delay1s();delay1s(); } } } //由于消息的開頭是+IP 故做此判斷，00000000000000000號 if((Usart_Receive[0]=='+')&&(Usart_Receive[1]=='I')&&(Usart_Receive[2]=='P')) { if((Usart_Receive[3]=='D')&&(Usart_Receive[5]=='3')&&(Usart_Receive[6]==',')) { if(Usart_Receive[9]=='1') { kaiguan = 0; delay1s500ms(); kaiguan = 1; delay1s(); for(i = 0 ; i<20; i++) { Usart_Receive[i]=' '; } } if(Usart_Receive[9]=='2') { kaiguan = 0; delay1s500ms(); kaiguan = 1; delay1s(); for(i = 0 ; i<20; i++) { Usart_Receive[i]=' '; } } if(Usart_Receive[9]=='3') { led1 = 0; delay1s();delay1s(); } if(Usart_Receive[9]=='4') { led1 = 1; delay1s();delay1s(); } if(Usart_Receive[9]=='5') { led2 = 0; delay1s();delay1s(); } if(Usart_Receive[9]=='6') { led2 = 1; delay1s();delay1s(); } } } //由于消息的開頭是+IP 故做此判斷，444444444444444444號 if((Usart_Receive[0]=='+')&&(Usart_Receive[1]=='I')&&(Usart_Receive[2]=='P')) { if((Usart_Receive[3]=='D')&&(Usart_Receive[5]=='0')&&(Usart_Receive[6]==',')) { if(Usart_Receive[9]=='1') { kaiguan = 0; delay1s500ms(); kaiguan = 1; delay1s(); for(i = 0 ; i<20; i++) { Usart_Receive[i]=' '; } } if(Usart_Receive[9]=='2') { kaiguan = 0; delay1s500ms(); kaiguan = 1; delay1s(); for(i = 0 ; i<20; i++) { Usart_Receive[i]=' '; } } if(Usart_Receive[9]=='3') { led1 = 0; delay1s();delay1s(); } if(Usart_Receive[9]=='4') { led1 = 1; delay1s();delay1s(); } if(Usart_Receive[9]=='5') { led2 = 0; delay1s();delay1s(); } if(Usart_Receive[9]=='6') { led2 = 1; delay1s();delay1s(); } } } } } }

#define _USART_C_ #include "include.h" unsigned char Usart_Receive[20]={0}; unsigned char Usart_Cnt=0; bit Usart_AT_flage; bit flage; bit Command_Flag; void InitUART(void) { TMOD = 0x20; SCON = 0x50; TH1 = 0xFD; TL1 = TH1; PCON = 0x00; EA = 1; ES = 1; TR1 = 1; } void Send_Uart(unsigned char value) { ES=0; //關閉串口中斷 TI=0; //清發送完畢中斷請求標志位 SBUF=value; //發送 while(TI==0); //等待發送完畢 TI=0; //清發送完畢中斷請求標志位 ES=1; //允許串口中斷 } void UARTInterrupt(void) interrupt 4 { if(RI) { RI=0; Usart_Receive[Usart_Cnt]=SBUF;//接收串口數據 Usart_Cnt++;// //返回數據以回車結尾，有回車，而且數據個數大于2，說明接收到了數據 if(Usart_Receive[Usart_Cnt-2]=='\r' && Usart_Receive[Usart_Cnt-1]=='\n' && Usart_Cnt >= 2) { Usart_Cnt = 0;//接收數據計數清零 Usart_AT_flage = 1;//數據接收成功標志位 } else if(Usart_Cnt > 20)// { Usart_Cnt = 0; } } }

#ifndef __USART_H_ #define __USART_H_#ifndef _USART_C_ #define _USART_ex_ extern #else #define _USART_ex_ #endif _USART_ex_ unsigned char Usart_Receive[20]; _USART_ex_ unsigned char Usart_Cnt; _USART_ex_ bit Usart_AT_flage; _USART_ex_ bit Command_Flag; _USART_ex_ unsigned char UsartData; _USART_ex_ void InitUART(void);//串口初始化 _USART_ex_ void Send_Uart(unsigned char value); #endif

#include <REGX52.H> #include "USART.h" #include <string.h> #include <intrins.h>

完了，，，，，，，

android代碼

package com.laboratory_control.yang;import java.io.InputStream; import java.io.OutputStream; import java.net.InetAddress; import java.net.Socket; import android.R.integer; import android.R.string; import android.app.Activity; import android.app.AlertDialog; import android.app.AlertDialog.Builder; import android.content.DialogInterface; import android.content.Intent; import android.content.SharedPreferences; import android.os.Bundle; import android.preference.PreferenceManager; import android.telephony.TelephonyManager; import android.util.Log; import android.view.KeyEvent; import android.view.Menu; import android.view.MenuItem; import android.view.View; import android.view.View.OnClickListener; import android.widget.Button; import android.widget.CheckBox; import android.widget.EditText; import android.widget.Toast; public class MainActivity extends Activity { String imei;//手機imei號 long long_mima; String string_mima; private SharedPreferences pref; private SharedPreferences.Editor editor; private CheckBox rememberpass; static Socket socket = null;//定義socket Button shenqing_button;//申請密鑰 Button LandingButton;//登陸按鈕 Button FarButton;//遠程連接按鈕 Button NearButton;//進程連接按鈕 EditText PasswordEditText;//密碼輸入框 EditText FarIpEditText;//遠程ip輸入框 EditText NearIpEditText;//近程ip輸入框 EditText PortText;//定義端口輸入框 static InputStream inputStream=null;//定義輸入流 static OutputStream outputStream=null;//定義輸出流 @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.activity_main); pref = PreferenceManager.getDefaultSharedPreferences(this); rememberpass = (CheckBox) findViewById(R.id.cb_mima); shenqing_button = (Button) findViewById(R.id.shenqingButton);//申請密鑰 LandingButton = (Button) findViewById(R.id.dengluButton);//登陸 FarButton = (Button) findViewById(R.id.yuanButton);//遠程按鈕 NearButton = (Button) findViewById(R.id.jinButton);//進程按鈕 FarIpEditText = (EditText) findViewById(R.id.IPEditText);//遠程ip輸入框 NearIpEditText = (EditText) findViewById(R.id.jinIPEditText);//進程ip輸入框 PortText = (EditText) findViewById(R.id.PORTEditText);//通信端口 PasswordEditText = (EditText) findViewById(R.id.mimaEditText);//登陸密碼 boolean isRemember = pref.getBoolean("cb_mima", false);//得到cb_mima文件存的值，得不到會返回false if (isRemember) //如果上次選擇了保存密碼 { //Toast.makeText(MainActivity.this, "123", Toast.LENGTH_SHORT).show(); String password = pref.getString("password", "");//取出密碼 PasswordEditText.setText(password);//把密碼輸入到密碼輸入框 rememberpass.setChecked(true);//選中記住密碼 } shenqing_button.setOnClickListener(shenqing_buttonListener); FarButton.setOnClickListener(FarButtonListener);//遠程監聽 NearButton.setOnClickListener(NearButtonListener);//進程監聽 LandingButton.setOnClickListener(LandingButtonListener);//登陸監聽 /** * 獲取IMEI號，IESI號，手機型號 */ getInfo(); /** * 為完全退出應用程序而加的代碼 */ ExitApplication.getInstance().addActivity(this); } /** * 申請密鑰監聽 */ private OnClickListener shenqing_buttonListener = new OnClickListener() { @Override public void onClick(View v) { // TODO Auto-generated method stub Toast.makeText(MainActivity.this,"請把"+imei+"提供給管理員",Toast.LENGTH_LONG).show(); } }; /** * 遠程按鈕連接監聽 */ private OnClickListener FarButtonListener = new OnClickListener() { @Override public void onClick(View v) { // TODO Auto-generated method stub //啟動遠程連接線程 FarConnect_Thread farconnect_Thread = new FarConnect_Thread(); farconnect_Thread.start(); } }; /** * //近程按鈕連接監聽 */ private OnClickListener NearButtonListener = new OnClickListener() { @Override public void onClick(View v) { // TODO Auto-generated method stub NearConnect_Thread nearconnect_Thread = new NearConnect_Thread(); nearconnect_Thread.start(); } }; /** * * 近程連接線程 * */ class NearConnect_Thread extends Thread//繼承Thread { public void run()//重寫run方法 { try { if(true) //if (socket == null) { //用InetAddress方法獲取ip地址 InetAddress ipAddress = InetAddress.getByName(NearIpEditText.getText().toString()); int port =Integer.valueOf(PortText.getText().toString());//獲取端口號 socket = new Socket(ipAddress, port);//創建連接地址和端口 if (socket !=null) { runOnUiThread(new Runnable() { public void run() { // TODO Auto-generated method stub Toast.makeText(MainActivity.this,"已成功連接！", Toast.LENGTH_SHORT).show(); } }); } } /* else { runOnUiThread(new Runnable() { public void run() { // TODO Auto-generated method stub Toast.makeText(MainActivity.this,"成功連接！輸入密碼后即可登陸", Toast.LENGTH_SHORT).show(); } }); }*/ } catch (Exception e) { // TODO Auto-generated catch block e.printStackTrace(); } } } /** * * 遠程連接線程 * */ class FarConnect_Thread extends Thread//繼承Thread { public void run()//重寫run方法 { try { if(true) //if (socket == null) { //用InetAddress方法獲取ip地址 InetAddress ipAddress = InetAddress.getByName(FarIpEditText.getText().toString()); int port =Integer.valueOf(PortText.getText().toString());//獲取端口號 socket = new Socket(ipAddress, port);//創建連接地址和端口 if (socket !=null) { runOnUiThread(new Runnable() { public void run() { // TODO Auto-generated method stub Toast.makeText(MainActivity.this,"成功連接！輸入密碼后即可登陸", Toast.LENGTH_SHORT).show(); } }); } } /* else { runOnUiThread(new Runnable() { public void run() { // TODO Auto-generated method stub Toast.makeText(MainActivity.this,"已經連接！", Toast.LENGTH_SHORT).show(); } }); }*/ } catch (Exception e) { // TODO Auto-generated catch block e.printStackTrace(); } } } /** * 登陸監聽，啟動控制Activity（活動） */ private OnClickListener LandingButtonListener = new OnClickListener() { @Override public void onClick(View v) { // TODO Auto-generated method stub //if(true) String password = PasswordEditText.getText().toString();//得到輸入框輸入的密碼 if (socket !=null)//連接成功 { if (PasswordEditText.getText().toString().equals(string_mima))//密碼正確 { editor = pref.edit(); if (rememberpass.isChecked()) { editor.putBoolean("cb_mima", true); editor.putString("password", password); } else { editor.clear(); } editor.commit(); Intent intent = new Intent(); intent.setClass(MainActivity.this, Control.class); MainActivity.this.startActivity(intent); } else { runOnUiThread(new Runnable() { public void run() { // TODO Auto-generated method stub Toast.makeText(MainActivity.this,"已連接，請輸入正確密碼！", Toast.LENGTH_SHORT).show(); } }); } } else { runOnUiThread(new Runnable() { public void run() { // TODO Auto-generated method stub Toast.makeText(MainActivity.this,"請先連接！", Toast.LENGTH_SHORT).show(); } }); } } }; /** * 退出提示框 */ protected void dialog() { AlertDialog.Builder builder = new Builder(MainActivity.this); builder.setMessage("親，確定要退出嗎"); builder.setTitle("提示"); builder.setPositiveButton("確定", new android.content.DialogInterface.OnClickListener() { @Override public void onClick(DialogInterface dialog, int which) { dialog.dismiss(); MainActivity.this.finish(); } }); builder.setNegativeButton("取消", new android.content.DialogInterface.OnClickListener() { @Override public void onClick(DialogInterface dialog, int which) { dialog.dismiss(); } }); builder.create().show(); } @Override public boolean onKeyDown(int keyCode, KeyEvent event) { if (keyCode == KeyEvent.KEYCODE_BACK && event.getRepeatCount() == 0) { dialog(); return false; } return false; } /** * 獲取IMEI號，IESI號，手機型號 */ private void getInfo() { TelephonyManager mTm = (TelephonyManager)this.getSystemService(TELEPHONY_SERVICE); imei = mTm.getDeviceId(); String aaaa = imei.substring(0,6); long_mima = Integer.parseInt(aaaa); long_mima = long_mima/3+666;//做運算當作登陸密碼 string_mima = ""+long_mima; //String imsi = mTm.getSubscriberId(); //String mtype = android.os.Build.MODEL; // 手機型號 //String mtyb= android.os.Build.BRAND;//手機品牌 //String numer = mTm.getLine1Number(); // 手機號碼，有的可得，有的不可得 Log.i("text", "手機IMEI號："+imei); Log.i("456", string_mima); } }

package com.laboratory_control.yang;import java.util.LinkedList; import java.util.List; import android.app.Activity; import android.app.Application; public class ExitApplication extends Application { private List<Activity> activityList = new LinkedList<Activity>(); private static ExitApplication instance; private ExitApplication() { } //單例模式中獲取唯一的ExitApplication實例 public static ExitApplication getInstance() { if(null==instance) { instance=new ExitApplication(); } return instance; } //添加Activity到容器中 public void addActivity(Activity activity) { activityList.add(activity); } //遍歷所有Activity并finish public void exit() { for(Activity activity:activityList) { activity.finish(); } System.exit(0); } }

package com.laboratory_control.yang;import java.io.IOException; import java.io.InputStream; import java.io.OutputStream; import android.app.Activity; import android.app.AlertDialog; import android.app.AlertDialog.Builder; import android.content.Context; import android.content.DialogInterface; import android.os.Bundle; import android.view.KeyEvent; import android.view.View; import android.view.View.OnClickListener; import android.widget.ImageButton; import android.widget.ImageView; import android.widget.Toast; public class Control extends MainActivity { boolean door_lamp = true; boolean room_lamp = true; boolean door = true; ImageButton door_ImageButton;//門口燈按鈕 ImageView doorlampImageView;//門口燈圖片 ImageButton room_ImageButton;//門口燈按鈕 ImageView roomlampImageView;//門口燈圖片 ImageButton controlroom_ImageButton;//門按鈕 ImageView doorImageView;//門圖片 @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.control_main); door_ImageButton = (ImageButton) findViewById(R.id.door_ImageButton); doorlampImageView = (ImageView) findViewById(R.id.DoorLamp_ImageView); room_ImageButton = (ImageButton) findViewById(R.id.room_ImageButton); roomlampImageView = (ImageView) findViewById(R.id.roomLamp_ImageView); controlroom_ImageButton = (ImageButton) findViewById(R.id.Control_door_ImageButton); doorImageView = (ImageView) findViewById(R.id.door_ImageView); /** * 門口燈按鈕監聽 */ door_ImageButton.setOnClickListener(door_ImageButton_Listener); /** * 屋里燈按鈕監聽 */ room_ImageButton.setOnClickListener(room_ImageButton_Listener); /** * 門按鈕監聽 */ controlroom_ImageButton.setOnClickListener(controlroom_ImageButton_Listener); /** * 為完全退出應用程序而加的代碼 */ ExitApplication.getInstance().addActivity(this); } /** * 門口燈按鈕監聽事件 */ private OnClickListener door_ImageButton_Listener = new OnClickListener() { @Override public void onClick(View v) { // TODO Auto-generated method stub if (door_lamp) //打開門口燈 { door_lamp = false; try { //獲取輸出流 outputStream = socket.getOutputStream(); //發送數據 outputStream.write("3".getBytes()); Toast.makeText(Control.this, "已發送打開門口燈命令", Toast.LENGTH_SHORT).show(); doorlampImageView.setImageResource(R.drawable.liangdeng); } catch (Exception e) { // TODO Auto-generated catch block e.printStackTrace(); } } else //關閉門口燈 { door_lamp = true; try { //獲取輸出流 outputStream = socket.getOutputStream(); //發送數據 outputStream.write("4".getBytes()); Toast.makeText(Control.this, "已發送關閉門口燈命令", Toast.LENGTH_SHORT).show(); doorlampImageView.setImageResource(R.drawable.heideng); } catch (Exception e) { // TODO Auto-generated catch block e.printStackTrace(); } } } }; /** * 屋里燈按鈕監聽事件 */ private OnClickListener room_ImageButton_Listener = new OnClickListener() { @Override public void onClick(View v) { // TODO Auto-generated method stub if (room_lamp) //打開屋里燈 { room_lamp = false; try { //獲取輸出流 outputStream = socket.getOutputStream(); //發送數據 outputStream.write("5".getBytes()); Toast.makeText(Control.this, "已發送打屋里燈燈命令", Toast.LENGTH_SHORT).show(); roomlampImageView.setImageResource(R.drawable.liangdeng); } catch (Exception e) { // TODO Auto-generated catch block e.printStackTrace(); } } else //關閉屋里燈 { room_lamp = true; try { //獲取輸出流 outputStream = socket.getOutputStream(); //發送數據 outputStream.write("6".getBytes()); Toast.makeText(Control.this, "已發送關閉屋里燈命令", Toast.LENGTH_SHORT).show(); roomlampImageView.setImageResource(R.drawable.heideng); } catch (Exception e) { // TODO Auto-generated catch block e.printStackTrace(); } } } }; /** * 門按鈕監聽事件 */ private OnClickListener controlroom_ImageButton_Listener = new OnClickListener() { @Override public void onClick(View v) { // TODO Auto-generated method stub if (door) //打開門 { door = false; try { //獲取輸出流 outputStream = socket.getOutputStream(); //發送數據 outputStream.write("1".getBytes()); Toast.makeText(Control.this, "已發送打開門命令", Toast.LENGTH_SHORT).show(); doorImageView.setImageResource(R.drawable.men222); } catch (Exception e) { // TODO Auto-generated catch block e.printStackTrace(); } } else //關閉門 { door = true; try { //獲取輸出流 outputStream = socket.getOutputStream(); //發送數據 outputStream.write("2".getBytes()); Toast.makeText(Control.this, "已發送關閉門命令", Toast.LENGTH_SHORT).show(); doorImageView.setImageResource(R.drawable.men111); } catch (Exception e) { // TODO Auto-generated catch block e.printStackTrace(); } } } }; protected void dialog() { AlertDialog.Builder builder = new Builder(Control.this); builder.setMessage("親，您是想？"); builder.setTitle("提示"); builder.setPositiveButton("直接退出", new android.content.DialogInterface.OnClickListener() { @Override public void onClick(DialogInterface dialog, int which) { dialog.dismiss(); /** * 完全退出應用程序 */ ExitApplication.getInstance().exit(); } }); builder.setNegativeButton("返回上一層", new android.content.DialogInterface.OnClickListener() { @Override public void onClick(DialogInterface dialog, int which) { dialog.dismiss(); Control.this.finish(); } }); builder.create().show(); } @Override public boolean onKeyDown(int keyCode, KeyEvent event) { if (keyCode == KeyEvent.KEYCODE_BACK && event.getRepeatCount() == 0) { dialog(); return false; } return false; } }

<?xml version="1.0" encoding="utf-8"?> <RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android"android:layout_width="match_parent"android:layout_height="match_parent" android:background="@android:color/black"><ImageButtonandroid:id="@+id/door_ImageButton"android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_alignParentRight="true" android:layout_alignParentTop="true" android:layout_marginRight="30dp" android:layout_marginTop="5dp" android:background="@android:color/black" android:src="@drawable/gnome_panel_force_quit" />  <ImageView android:id="@+id/DoorLamp_ImageView" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_alignParentLeft="true" android:layout_alignParentTop="true" android:layout_marginLeft="16dp" android:background="@android:color/white" android:src="@drawable/heideng" />  <ImageButton android:id="@+id/room_ImageButton" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_marginTop="155dp" android:layout_alignRight="@id/door_ImageButton" android:background="@android:color/black" android:src="@drawable/gnome_panel_force_quit" />  <ImageView android:id="@+id/roomLamp_ImageView" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_alignRight="@id/DoorLamp_ImageView" android:layout_marginTop="150dp" android:background="@android:color/white" android:src="@drawable/heideng" />  <TextView android:text="門口燈控制" android:textColor="@android:color/holo_green_dark" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_marginTop="35dp" android:layout_centerHorizontal="true" />  <TextView android:text="屋里燈控制" android:textColor="@android:color/holo_green_dark" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_marginTop="190dp" android:layout_centerHorizontal="true" />  <ImageButton android:id="@+id/Control_door_ImageButton" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_marginTop="305dp" android:layout_alignRight="@id/door_ImageButton" android:background="@android:color/black" android:src="@drawable/gnome_panel_force_quit" />  <TextView android:text="門控制" android:textColor="@android:color/holo_green_dark" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_marginTop="337dp" android:layout_centerHorizontal="true" />  <ImageView android:id="@+id/door_ImageView" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_alignRight="@id/DoorLamp_ImageView" android:layout_alignTop="@+id/Control_door_ImageButton" android:background="@android:color/white" android:src="@drawable/men111" /> </RelativeLayout>

權限

<?xml version="1.0" encoding="utf-8"?> <manifest xmlns:android="http://schemas.android.com/apk/res/android"package="com.laboratory_control.yang"android:versionCode="1"android:versionName="1.0" ><uses-sdkandroid:minSdkVersion="16"android:targetSdkVersion="21" /> <uses-permission android:name="android.permission.READ_PHONE_STATE" /> <uses-permission android:name="android.permission.INTERNET"/><uses-permission android:name="android.permission.ACCESS_WIFI_STATE"/><application android:allowBackup="true" android:icon="@drawable/a333333" android:label="@string/app_name" android:theme="@style/AppTheme" > <activity android:name=".MainActivity" android:label="@string/app_name" > <intent-filter> <action android:name="android.intent.action.MAIN" /> <category android:name="android.intent.category.LAUNCHER" /> </intent-filter> </activity> <activity android:name=".Control" android:label="Control" ></activity> </application> </manifest>

用到的圖片就不貼了

其實只要看過前幾片文章，做這個絕對沒問題。

我還在程序里設置了申請密碼，讀手機的IMEI號，然后做了一些運算后當成登陸密碼，（運算方法只有我和信任的人自己知道，凡是想用這款軟件控制實驗室，必須通過我們對他的手機的IMEI號進行運算后才可以得到登陸密碼）我是為了保證每個人的手機安裝軟件后都有自己單獨的登陸密碼，防止其他人安裝軟件后就可以控制實驗室。

上面有運算過程，我已經修改了。防止意外,若有問題QQ946029359

軟件可以在上搜索實驗室

關于密碼列如我的手機

取前六位863328除6 =143888然后減一 = 143887

因為路由器的公網IP會變,可以用花生殼申請一個域名,這樣登陸的時候輸入域名就行了.解決公網IP會變的麻煩..這是網友云霄(QQ名稱)告訴我的..謝謝他

轉載于:https://www.cnblogs.com/pilink/p/8434859.html

總結

以上是生活随笔為你收集整理的【转载】android客服端+eps8266+单片机+路由器之远程控制系统的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。

上一篇： C语言错误处理方法、C++异常处理方法（
下一篇： Mysql数据中文乱码问题处理