把裝逼進行到底！提高生活質量，多用鍵盤，不買鼠標！

我的vimrc插件大致如下：

c/c++查找
ctags(一般自帶) +cscope?


函數提示
echofunc?


窗口
taglist + WinManager + quickfix(一般自帶) + nerdtree + MiniBufExplorer


智能補全
supertab + omnicppcomplete


畫圖
drawit + sketch


沒裝上
vimgdb

--------------------------------------------------------------------------------------------------------------------------

配置文件夾在?http://download.csdn.net/detail/c_o_o_l_u_l_u/4599052，

即我的帳號下載欄目叫：coolulu的vim插件配置文件夾（我的WinManager插件的目錄欄是在右邊的）

我的vimrc

""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" " Copycat: lulu " Version: 3.2.3 " Install: 在linux和windows下無需改動配置文件的內容,對應配置文件夾是vim_3 " 在linux下在 ~/ 目錄下,配置文件名改成 .vimrc,路徑為 ~/.vimrc " 配置文件夾名改成 .vim,路徑為 ~/.vim " 在windows下在 $(vim)/ 目錄下,配置文件名改成 _vimrc,路徑為 Vim/_vimrc " 配置文件夾名改成 vimfiles,路徑為 Vim/vimfiles " NoBugs: windows下 taglist使用有問題已修復 " Time: 2012.8.3 """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" " 文本格式和排版 " set formatoptions=tcrqn " 自動格式化 set autoindent " 繼承前一行的縮進方式，特別適用于多行注釋 set smartindent " 為C程序提供自動縮進 set cindent " 使用C樣式的縮進 set smarttab " 在行和段開始處使用制表符 "set tabstop=4 " 制表符為4 "set softtabstop=4 " 統一縮進為4 "set shiftwidth=4 "set noexpandtab " 不要用空格代替制表符 "set nowrap " 不要換行""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" " 搜索和匹配 " set showmatch " 高亮顯示匹配的括號 set matchtime=5 " 匹配括號高亮的時間（單位是十分之一秒） set scrolloff=10 " 光標移動到buffer的頂部和底部時保持10行距離 set novisualbell " 不要閃爍 set hlsearch " 高亮搜索 set nowrapscan " 查找到文件頭或文件尾時停止 "set incsearch " 邊輸入邊查找 "set laststatus=2 " 總是顯示狀態行 "set ignorecase " 在搜索的時候忽略大小寫 "set statusline=%F%m%r%h%w\[POS=%l,%v][%p%%]\%{strftime(\”%d/%m/%y\ -\ %H:%M\”)} " 我的狀態行顯示的內容（包括文件類型和解碼）""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" " 文件設置 " set shortmess=atI " 啟動的時候不顯示那個援助索馬里兒童的提示` set report=0 " 通過使用: commands命令，告訴我們文件的哪一行被改變過 set noerrorbells " 不讓vim發出討厭的滴滴聲 set fillchars=vert:\ ,stl:\ " 在被分割的窗口間顯示空白，便于閱讀 ,stlnc:\(加了這個wm分割蘭有\\\\\\\\\\\\\) set mouse=a " 可以在buffer的任何地方使用鼠標（類似office中在工作區雙擊鼠標定位） set selection=exclusive set selectmode=mouse,key""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" " 一般設置 " set viminfo+=! " 保存全局變量 set history=300 " history文件中需要記錄的行數 set nocompatible " 不要使用vi的鍵盤模式，而是vim自己的 set foldmethod=syntax set foldlevel=100 " 啟動vim時不要自動折疊代碼 set nu set fileencodings=utf-8,gbk set ruler set showmatch " 高亮顯示匹配的括號 filetype on " 偵測文件類型 set nobackup " 不要備份文件（根據自己需要取舍） "set backup syntax enable syntax on " 語法高亮 set magic " 設置正表達式 set backspace=indent,eol,start " 這指明在插入模式下在哪里允許 <BS> 刪除光標前面的字符。" 逗號分隔的三個值分別指：行首的空白字符，換行符和插入模式開始處之前的字符。 set showcmd " 在 Vim 窗口右下角，標尺的右邊顯示未完成的命令 " :inoremap ( ()<ESC>i " :inoremap { {<CR>}<ESC>O " :inoremap [ []<ESC>i " :inoremap " ""<ESC>i " :inoremap ' ''<ESC>i""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" " GUI " if has("gui_running") " 如果是圖形界面 set guioptions=m " 關閉菜單欄set guioptions=t " 關閉工具欄 " set guioptions=L " 啟動左邊的滾動條 " set guioptions+=r " 啟動右邊的滾動條 " set guioptions+=b " 啟動下邊的滾動條set clipboard+=unnamed " 共享剪貼板if has("win32")colorscheme torte " torte配色方案set guifont=Consolas:h11 " 字體和大小endif endif """"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" " taglist " let Tlist_Use_Right_Window = 0 " 在左側顯示窗口 let Tlist_Compart_Format = 1 " 壓縮方式 let Tlist_Exist_OnlyWindow = 1 " 如果只有一個buffer，kill窗口也kill掉buffer let Tlist_File_Fold_Auto_Close = 0 " 不要關閉其他文件的tags let Tlist_Enable_Fold_Column = 0 " 不要顯示折疊樹 (鼠標可以點開) nmap <silent> <leader>tl :Tlist<cr>if has("win32") let Tlist_Ctags_Cmd = ' ctags' "windows下必須空3個字符,否則解析成gs else let Tlist_Ctags_Cmd = '/usr/bin/ctags' endif""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" " netrw " let g:netrw_winsize = 35 nmap <silent> <leader>fe :Sexplore!<cr>""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" " winmanager " let g:winManagerWindowLayout='NERDTree|BufExplorer' "let g:winManagerWindowLayout = 'FileExplorer|TagList' "let g:winManagerWindowLayout = 'FileExplorer' let g:winManagerWidth = 35 let g:defaultExplorer = 0 nmap wm :WMToggle<cr> nmap <C-W><C-F> :FirstExplorerWindow<cr> nmap <C-W><C-B> :BottomExplorerWindow<cr> autocmd BufWinEnter \[Buf\ List\] setl nonumber""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" " omnicppcomplete " set nocp filetype plugin on let OmniCpp_DefaultNamespaces = ["std"] "下面的設置用于當用戶預先聲明namespace時也能自動補全代碼（如使用using std::string） "if has("win32") " 設置代碼提示窗口的顏色（默認為粉紅色) " highlight Pmenu ctermbg=13 guibg=LightGray " highlight PmenuSel ctermbg=7 guibg=DarkBlue guifg=White " highlight PmenuSbar ctermbg=7 guibg=DarkGray " highlight PmenuThumb guibg=Black "endif""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" " minibufexpl " let g:miniBufExplMapWindowNavVim = 1 let g:miniBufExplMapWindowNavArrows = 1 let g:miniBufExplMapCTabSwitchBufs = 1 let g:miniBufExplModSelTarget = 1 "let g:miniBufExplorerMoreThanOne=1 "自動打開""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" " cscope " if has("cscope")set csto=0set cstset nocsverbif filereadable("cscope.out") " add any database in current directory cs add cscope.outelseif $CSCOPE_DB != "" " else add database pointed to by environment cs add $CSCOPE_DBendifset csverb " 這個必須放在后面,不然windows上找不到cscope.out endifnmap <C-\>s :cs find s <C-R>=expand("<cword>")<CR><CR> :cw<CR> nmap <C-\>g :cs find g <C-R>=expand("<cword>")<CR><CR> :cw<CR> nmap <C-\>c :cs find c <C-R>=expand("<cword>")<CR><CR> :cw<CR> nmap <C-\>t :cs find t <C-R>=expand("<cword>")<CR><CR> :cw<CR> nmap <C-\>e :cs find e <C-R>=expand("<cword>")<CR><CR> :cw<CR> nmap <C-\>f :cs find f <C-R>=expand("<cfile>")<CR><CR> :cw<CR> nmap <C-\>i :cs find i ^<C-R>=expand("<cfile>")<CR>$<CR> :cw<CR> nmap <C-\>d :cs find d <C-R>=expand("<cword>")<CR><CR> :cw<CR> "nmap <C-_>s :cs find s <C-R>=expand("<cword>")<CR><CR> "nmap <C-_>g :cs find g <C-R>=expand("<cword>")<CR><CR> "nmap <C-_>c :cs find c <C-R>=expand("<cword>")<CR><CR> "nmap <C-_>t :cs find t <C-R>=expand("<cword>")<CR><CR> "nmap <C-_>e :cs find e <C-R>=expand("<cword>")<CR><CR> "nmap <C-_>f :cs find f <C-R>=expand("<cfile>")<CR><CR> "nmap <C-_>i :cs find i ^<C-R>=expand("<cfile>")<CR>$<CR> "nmap <C-_>d :cs find d <C-R>=expand("<cword>")<CR><CR> " Using 'CTRL-spacebar' then a search type makes the vim window " split horizontally, with search result displayed in " the new window. nmap <C-Space>s :scs find s <C-R>=expand("<cword>")<CR><CR> nmap <C-Space>g :scs find g <C-R>=expand("<cword>")<CR><CR> nmap <C-Space>c :scs find c <C-R>=expand("<cword>")<CR><CR> nmap <C-Space>t :scs find t <C-R>=expand("<cword>")<CR><CR> nmap <C-Space>e :scs find e <C-R>=expand("<cword>")<CR><CR> nmap <C-Space>f :scs find f <C-R>=expand("<cfile>")<CR><CR> nmap <C-Space>i :scs find i ^<C-R>=expand("<cfile>")<CR>$<CR> nmap <C-Space>d :scs find d <C-R>=expand("<cword>")<CR><CR> " Hitting CTRL-space *twice* before the search type does a vertical " split instead of a horizontal one nmap <C-Space><C-Space>s\:vert scs find s <C-R>=expand("<cword>")<CR><CR> nmap <C-Space><C-Space>g\:vert scs find g <C-R>=expand("<cword>")<CR><CR> nmap <C-Space><C-Space>c\:vert scs find c <C-R>=expand("<cword>")<CR><CR> nmap <C-Space><C-Space>t\:vert scs find t <C-R>=expand("<cword>")<CR><CR> nmap <C-Space><C-Space>e\:vert scs find e <C-R>=expand("<cword>")<CR><CR> nmap <C-Space><C-Space>i\:vert scs find i ^<C-R>=expand("<cfile>")<CR>$<CR> nmap <C-Space><C-Space>d\:vert scs find d <C-R>=expand("<cword>")<CR><CR> """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""

?

?

使用時：

文件代碼很多時輸入：

? ? ? ? ? ? ? ? ? ? ? ?生成索引 ！ctags -R ? --fields=+lS ?--c++-kinds=+p --fields=+iaS --extra=+q?
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?(echofunc) ?(omnicppcomplete)?
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ！cscope -Rbkq

-------------------------------------------------------------------------------------------------------------------------------------

windows下的?把

?ctags.exe,?

cscope.exe,?
curses2.dll,?
regex2.dll?
放到?
$(vim)\vim73

還有windows的cscope 不支持 -q選項

---------------------------------------------------------------------------

?

GVIM(1) VIM(1)NAMEvim - Vi IMproved, a programmers text editorSYNOPSISvim [options] [file ..]vim [options] -vim [options] -t tagvim [options] -q [errorfile]exviewgvim gview evim eviewrvim rview rgvim rgviewDESCRIPTIONVim is a text editor that is upwards compatible to Vi. It can be usedto edit all kinds of plain text. It is especially useful for editingprograms.There are a lot of enhancements above Vi: multi level undo, multi win‐dows and buffers, syntax highlighting, command line editing, filenamecompletion, on-line help, visual selection, etc.. See ":helpvi_diff.txt" for a summary of the differences between Vim and Vi.While running Vim a lot of help can be obtained from the on-line helpsystem, with the ":help" command. See the ON-LINE HELP section below.Most often Vim is started to edit a single file with the commandvim fileMore generally Vim is started with:vim [options] [filelist]If the filelist is missing, the editor will start with an empty buffer.Otherwise exactly one out of the following four may be used to chooseone or more files to be edited.file .. A list of filenames. The first one will be the currentfile and read into the buffer. The cursor will be posi‐tioned on the first line of the buffer. You can get to theother files with the ":next" command. To edit a file thatstarts with a dash, precede the filelist with "--".- The file to edit is read from stdin. Commands are readfrom stderr, which should be a tty.-t {tag} The file to edit and the initial cursor position depends ona "tag", a sort of goto label. {tag} is looked up in thetags file, the associated file becomes the current file andthe associated command is executed. Mostly this is usedfor C programs, in which case {tag} could be a functionname. The effect is that the file containing that functionbecomes the current file and the cursor is positioned onthe start of the function. See ":help tag-commands".-q [errorfile]Start in quickFix mode. The file [errorfile] is read andthe first error is displayed. If [errorfile] is omitted,the filename is obtained from the 'errorfile' option(defaults to "AztecC.Err" for the Amiga, "errors.err" onother systems). Further errors can be jumped to with the":cn" command. See ":help quickfix".Vim behaves differently, depending on the name of the command (the exe‐cutable may still be the same file).vim The "normal" way, everything is default.ex Start in Ex mode. Go to Normal mode with the ":vi" command.Can also be done with the "-e" argument.view Start in read-only mode. You will be protected from writingthe files. Can also be done with the "-R" argument.gvim gviewThe GUI version. Starts a new window. Can also be done withthe "-g" argument.evim eviewThe GUI version in easy mode. Starts a new window. Can alsobe done with the "-y" argument.rvim rview rgvim rgviewLike the above, but with restrictions. It will not be possi‐ble to start shell commands, or suspend Vim. Can also bedone with the "-Z" argument.OPTIONSThe options may be given in any order, before or after filenames.Options without an argument can be combined after a single dash.+[num] For the first file the cursor will be positioned on line"num". If "num" is missing, the cursor will be positionedon the last line.+/{pat} For the first file the cursor will be positioned on thefirst occurrence of {pat}. See ":help search-pattern" forthe available search patterns.+{command}-c {command}{command} will be executed after the first file has beenread. {command} is interpreted as an Ex command. If the{command} contains spaces it must be enclosed in doublequotes (this depends on the shell that is used). Example:Vim "+set si" main.cNote: You can use up to 10 "+" or "-c" commands.-S {file} {file} will be sourced after the first file has been read.This is equivalent to -c "source {file}". {file} cannotstart with '-'. If {file} is omitted "Session.vim" is used(only works when -S is the last argument).--cmd {command}Like using "-c", but the command is executed just beforeprocessing any vimrc file. You can use up to 10 of thesecommands, independently from "-c" commands.-A If Vim has been compiled with ARABIC support for editingright-to-left oriented files and Arabic keyboard mapping,this option starts Vim in Arabic mode, i.e. 'arabic' isset. Otherwise an error message is given and Vim aborts.-b Binary mode. A few options will be set that makes it pos‐sible to edit a binary or executable file.-C Compatible. Set the 'compatible' option. This will makeVim behave mostly like Vi, even though a .vimrc fileexists.-d Start in diff mode. There should be two, three or fourfile name arguments. Vim will open all the files and showdifferences between them. Works like vimdiff(1).-d {device} Open {device} for use as a terminal. Only on the Amiga.Example: "-d con:20/30/600/150".-D Debugging. Go to debugging mode when executing the firstcommand from a script.-e Start Vim in Ex mode, just like the executable was called"ex".-E Start Vim in improved Ex mode, just like the executable wascalled "exim".-f Foreground. For the GUI version, Vim will not fork anddetach from the shell it was started in. On the Amiga, Vimis not restarted to open a new window. This option shouldbe used when Vim is executed by a program that will waitfor the edit session to finish (e.g. mail). On the Amigathe ":sh" and ":!" commands will not work.--nofork Foreground. For the GUI version, Vim will not fork anddetach from the shell it was started in.-F If Vim has been compiled with FKMAP support for editingright-to-left oriented files and Farsi keyboard mapping,this option starts Vim in Farsi mode, i.e. 'fkmap' and'rightleft' are set. Otherwise an error message is givenand Vim aborts.-g If Vim has been compiled with GUI support, this optionenables the GUI. If no GUI support was compiled in, anerror message is given and Vim aborts.-h Give a bit of help about the command line arguments andoptions. After this Vim exits.-H If Vim has been compiled with RIGHTLEFT support for editingright-to-left oriented files and Hebrew keyboard mapping,this option starts Vim in Hebrew mode, i.e. 'hkmap' and'rightleft' are set. Otherwise an error message is givenand Vim aborts.-i {viminfo}When using the viminfo file is enabled, this option setsthe filename to use, instead of the default "~/.viminfo".This can also be used to skip the use of the .viminfo file,by giving the name "NONE".-L Same as -r.-l Lisp mode. Sets the 'lisp' and 'showmatch' options on.-m Modifying files is disabled. Resets the 'write' option.You can still modify the buffer, but writing a file is notpossible.-M Modifications not allowed. The 'modifiable' and 'write'options will be unset, so that changes are not allowed andfiles can not be written. Note that these options can beset to enable making modifications.-N No-compatible mode. Reset the 'compatible' option. Thiswill make Vim behave a bit better, but less Vi compatible,even though a .vimrc file does not exist.-n No swap file will be used. Recovery after a crash will beimpossible. Handy if you want to edit a file on a veryslow medium (e.g. floppy). Can also be done with ":setuc=0". Can be undone with ":set uc=200".-nb Become an editor server for NetBeans. See the docs fordetails.-o[N] Open N windows stacked. When N is omitted, open one windowfor each file.-O[N] Open N windows side by side. When N is omitted, open onewindow for each file.-p[N] Open N tab pages. When N is omitted, open one tab page foreach file.-R Read-only mode. The 'readonly' option will be set. Youcan still edit the buffer, but will be prevented from acci‐dently overwriting a file. If you do want to overwrite afile, add an exclamation mark to the Ex command, as in":w!". The -R option also implies the -n option (seebelow). The 'readonly' option can be reset with ":setnoro". See ":help 'readonly'".-r List swap files, with information about using them forrecovery.-r {file} Recovery mode. The swap file is used to recover a crashedediting session. The swap file is a file with the samefilename as the text file with ".swp" appended. See ":helprecovery".-s Silent mode. Only when started as "Ex" or when the "-e"option was given before the "-s" option.-s {scriptin}The script file {scriptin} is read. The characters in thefile are interpreted as if you had typed them. The samecan be done with the command ":source! {scriptin}". If theend of the file is reached before the editor exits, furthercharacters are read from the keyboard.-T {terminal}Tells Vim the name of the terminal you are using. Onlyrequired when the automatic way doesn't work. Should be aterminal known to Vim (builtin) or defined in the termcapor terminfo file.-u {vimrc} Use the commands in the file {vimrc} for initializations.All the other initializations are skipped. Use this toedit a special kind of files. It can also be used to skipall initializations by giving the name "NONE". See ":helpinitialization" within vim for more details.-U {gvimrc} Use the commands in the file {gvimrc} for GUI initializa‐tions. All the other GUI initializations are skipped. Itcan also be used to skip all GUI initializations by givingthe name "NONE". See ":help gui-init" within vim for moredetails.-V[N] Verbose. Give messages about which files are sourced andfor reading and writing a viminfo file. The optional num‐ber N is the value for 'verbose'. Default is 10.-v Start Vim in Vi mode, just like the executable was called"vi". This only has effect when the executable is called"ex".-w {scriptout}All the characters that you type are recorded in the file{scriptout}, until you exit Vim. This is useful if youwant to create a script file to be used with "vim -s" or":source!". If the {scriptout} file exists, characters areappended.-W {scriptout}Like -w, but an existing file is overwritten.-x Use encryption when writing files. Will prompt for a cryptkey.-X Don't connect to the X server. Shortens startup time in aterminal, but the window title and clipboard will not beused.-y Start Vim in easy mode, just like the executable was called"evim" or "eview". Makes Vim behave like a click-and-typeeditor.-Z Restricted mode. Works like the executable starts with"r".-- Denotes the end of the options. Arguments after this willbe handled as a file name. This can be used to edit afilename that starts with a '-'.--echo-wid GTK GUI only: Echo the Window ID on stdout.--help Give a help message and exit, just like "-h".--literal Take file name arguments literally, do not expand wild‐cards. This has no effect on Unix where the shell expandswildcards.--noplugin Skip loading plugins. Implied by -u NONE.--remote Connect to a Vim server and make it edit the files given inthe rest of the arguments. If no server is found a warningis given and the files are edited in the current Vim.--remote-expr {expr}Connect to a Vim server, evaluate {expr} in it and printthe result on stdout.--remote-send {keys}Connect to a Vim server and send {keys} to it.--remote-silentAs --remote, but without the warning when no server isfound.--remote-waitAs --remote, but Vim does not exit until the files havebeen edited.--remote-wait-silentAs --remote-wait, but without the warning when no server isfound.--serverlistList the names of all Vim servers that can be found.--servername {name}Use {name} as the server name. Used for the current Vim,unless used with a --remote argument, then it's the name ofthe server to connect to.--socketid {id}GTK GUI only: Use the GtkPlug mechanism to run gvim inanother window.--version Print version information and exit.ON-LINE HELPType ":help" in Vim to get started. Type ":help subject" to get helpon a specific subject. For example: ":help ZZ" to get help for the"ZZ" command. Use <Tab> and CTRL-D to complete subjects (":help cmd‐line-completion"). Tags are present to jump from one place to another(sort of hypertext links, see ":help"). All documentation files can beviewed in this way, for example ":help syntax.txt".FILES/usr/share/vim/vim73/doc/*.txtThe Vim documentation files. Use ":help doc-file-list"to get the complete list./usr/share/vim/vim73/doc/tagsThe tags file used for finding information in the docu‐mentation files./usr/share/vim/vim73/syntax/syntax.vimSystem wide syntax initializations./usr/share/vim/vim73/syntax/*.vimSyntax files for various languages./usr/share/vim/vimrcSystem wide Vim initializations.~/.vimrc Your personal Vim initializations./usr/share/vim/gvimrcSystem wide gvim initializations.~/.gvimrc Your personal gvim initializations./usr/share/vim/vim73/optwin.vimScript used for the ":options" command, a nice way toview and set options./usr/share/vim/vim73/menu.vimSystem wide menu initializations for gvim./usr/share/vim/vim73/bugreport.vimScript to generate a bug report. See ":help bugs"./usr/share/vim/vim73/filetype.vimScript to detect the type of a file by its name. See":help 'filetype'"./usr/share/vim/vim73/scripts.vimScript to detect the type of a file by its contents.See ":help 'filetype'"./usr/share/vim/vim73/print/*.psFiles used for PostScript printing.For recent info read the VIM home page:<URL:http://www.vim.org/>SEE ALSOvimtutor(1)AUTHORMost of Vim was made by Bram Moolenaar, with a lot of help from others.See ":help credits" in Vim.Vim is based on Stevie, worked on by: Tim Thompson, Tony Andrews andG.R. (Fred) Walter. Although hardly any of the original code remains.BUGSProbably. See ":help todo" for a list of known problems.Note that a number of things that may be regarded as bugs by some, arein fact caused by a too-faithful reproduction of Vi's behaviour. Andif you think other things are bugs "because Vi does it differently",you should take a closer look at the vi_diff.txt file (or type :helpvi_diff.txt when in Vim). Also have a look at the 'compatible' and'cpoptions' options.2006 Apr 11 VIM(1)

?

轉載于:https://www.cnblogs.com/coolulu/archive/2012/09/26/4084907.html

總結

以上是生活随笔為你收集整理的用linux装逼-我的vim配置(不定时更新)的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。