重新加載網卡時出現的錯誤如下：

1 [root@vdb1 dev]# service network restart 2 Shutting down interface eth0: Device state: 3 (disconnected) 3 [ OK ] 4 Shutting down interface eth1: [ OK ] 5 Shutting down interface eth2: Device state: 3 (disconnected) 6 [ OK ] 7 Shutting down loopback interface: [ OK ] 8 Bringing up loopback interface: [ OK ] 9 Bringing up interface eth0: Active connection state: activating 10 Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/23 11 Error: Timeout 90 sec expired. 12 [FAILED] 13 Bringing up interface eth1: Active connection state: activated 14 Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/25 15 [ OK ] 16 Bringing up interface eth2: Active connection state: activated 17 Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/26 18 [ OK ]

此時，當前網卡也是可以通信的，但是通過網絡管理工具修改IP之后，當前修改操作是不會生效的。那如何消除這個提示呢？

其實，問題的原因是RedHat自己開發的NetworkManager管理工具和/etc/sysconfig/network-scripts/ifcfg-ethx配置不同步造成的。如果要消除這個提示，請關閉NetworkManager服務即可：

[root@vdb1 dev]# chkconfig NetworkManager off --永久關閉服務，需要重啟 [root@vdb1 dev]# service NetworkManager stop --立即關閉服務，不需要重啟 Stopping NetworkManager daemon: [ OK ]

此時，再重新加載network服務即可：

1 [root@vdb1 dev]# service network restart 2 Shutting down interface eth0: [ OK ] 3 Shutting down interface eth1: [ OK ] 4 Shutting down interface eth2: [ OK ] 5 Shutting down loopback interface: [ OK ] 6 Bringing up loopback interface: [ OK ] 7 Bringing up interface eth0: 8 Determining IP information for eth0... failed. 9 [FAILED] 10 Bringing up interface eth1: Determining if ip address 192.168.179.181 is already in use for device eth0... 11 [ OK ] 12 Bringing up interface eth2: Determining if ip address 172.168.180.191 is already in use for device eth2... 13 [ OK ]

來源:https://www.cnblogs.com/mawanglin2008/p/3926851.html

總結

以上是生活随笔為你收集整理的CentOS重新加载网卡报错 Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/23的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。