在自己公司的局域網內,咨詢當前樓層的打印機ip地址與打印機名字.(打印機是否需要驗證賬戶等).

電腦上根據ip地址先查詢設備,然后添加.

添加完之后選擇下載對應的打印機的驅動.比如惠普的Linux發行版驅動.

安裝驅動.例如我下載的 hplip-3.19.12.run文件.

安裝比較麻煩,試了很多次.要求關聯的應用太多,比如qt 等各種東西,有的還需要比較科學的network.最后我整理了這個套路.成功運行打印了文件.

xx@linux:~/下載$ sudo sh '/home/xx/下載/hplip-3.19.12.run' Creating directory hplip-3.19.12 Verifying archive integrity... All good. Uncompressing HPLIP 3.19.12 Self Extracting Archive........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................ warning: hplip-install should not be run as root.HP Linux Imaging and Printing System (ver. 3.19.12) HPLIP Installer ver. 5.1Copyright (c) 2001-18 HP Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details.Installer log saved in: hplip-install_Fri-20-Dec-2019_16:54:36.log\error: You are running the installer as root. It is highly recommended that you run the installer as error: a regular (non-root) user. Do you still wish to continue? Continue with installation (y=yes, n=no*, q=quit) ? ynote: Defaults for each question are maked with a '*'. Press <enter> to accept the default.INSTALLATION MODE ----------------- Automatic mode will install the full HPLIP solution with the most common options. Custom mode allows you to choose installation options to fit specific requirements.Please choose the installation mode (a=automatic*, c=custom, q=quit) : cINTRODUCTION ------------ This installer will install HPLIP version 3.19.12 on your computer. Please close any running package management systems now (YaST, Adept, Synaptic, Up2date, etc).DISTRO/OS CONFIRMATION ---------------------- Distro appears to be Ubuntu 18.04.Is "Ubuntu 18.04" your correct distro/OS and version (y=yes*, n=no, q=quit) ? yDRIVER OPTIONS -------------- Would you like to install Custom Discrete Drivers or Class Drivers ( 'd'= Discrete Drivers*,'c'= Class Drivers,'q'= Quit)? : dInitializing. Please wait...SELECT HPLIP OPTIONS -------------------- You can select which HPLIP options to enable. Some options require extra dependencies.Do you wish to enable 'Network/JetDirect I/O' (y=yes*, n=no, q=quit) ? y Do you wish to enable 'Graphical User Interfaces (Qt4)' (y=yes*, n=no, q=quit) ? n Do you wish to enable 'Graphical User Interfaces (Qt5)' (y=yes, n=no*, q=quit) ? n Do you wish to enable 'PC Send Fax support' (y=yes*, n=no, q=quit) ? y Do you wish to enable 'Scanning support' (y=yes*, n=no, q=quit) ? y Do you wish to enable 'HPLIP documentation (HTML)' (y=yes*, n=no, q=quit) ? nINSTALLATION NOTES ------------------ Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information. Disable the CD-ROM/DVD source if you do not have the Ubuntu installation media inserted in the drive.Please read the installation notes. Press <enter> to continue or 'q' to quit: SECURITY PACKAGES ----------------- AppArmor is installed. AppArmor protects the application from external intrusion attempts making the application secureWould you like to have this installer install the hplip specific policy/profile (y=yes*, n=no, q=quit) ? yRUNNING PRE-INSTALL COMMANDS ---------------------------- OKRUNNING SCANJET DEPENDENCY COMMANDS ----------------------------------- sudo apt-get install --assume-yes python-pip (Scanjet-depend step 1) sudo pip2 install --upgrade pip (Scanjet-depend step 2) sudo apt-get install --assume-yes libleptonica-dev (Scanjet-depend step 3) sudo apt-get install --assume-yes tesseract-ocr (Scanjet-depend step 4) sudo apt-get install --assume-yes libtesseract-dev (Scanjet-depend step 5) sudo -H pip2 install tesserocr (Scanjet-depend step 6) sudo apt-get install --assume-yes tesseract-ocr-all (Scanjet-depend step 7) sudo apt-get install --assume-yes libzbar-dev (Scanjet-depend step 8) sudo apt-get install --assume-yes python-zbar (Scanjet-depend step 9) sudo -H pip2 install opencv-python (Scanjet-depend step 10) /- warning: Failed to install this Scanjet dependency package. Some Scanjet features will not work. sudo -H pip2 install PyPDF2 (Scanjet-depend step 11) sudo -H pip2 install imutils (Scanjet-depend step 12) sudo -H pip2 install pypdfocr (Scanjet-depend step 13) sudo -H pip2 install scikit-image (Scanjet-depend step 14) warning: Failed to install this Scanjet dependency package. Some Scanjet features will not work. sudo -H pip2 install scipy (Scanjet-depend step 15) warning: Failed to install this Scanjet dependency package. Some Scanjet features will not work. OKREADY TO BUILD AND INSTALL -------------------------- Ready to perform build and install. Press <enter> to continue or 'q' to quit: PRE-BUILD COMMANDS ------------------ OKBUILD AND INSTALL ----------------- Running './configure --with-hpppddir=/usr/share/ppd/HP --libdir=/usr/lib --prefix=/usr --disable-qt4 --disable-qt5 --disable-doc-build --disable-cups-ppd-install --disable-foomatic-drv-install --disable-libusb01_build --disable-foomatic-ppd-install --disable-hpijs-install --disable-class-driver --disable-udev_sysfs_rules --disable-policykit --enable-cups-drv-install --enable-hpcups-install --enable-network-build --enable-dbus-build --enable-scan-build --enable-fax-build --enable-apparmor_build' Please wait, this may take several minutes... Command completed successfully.Running 'make clean' Please wait, this may take several minutes... Command completed successfully.Running 'make' Please wait, this may take several minutes... Command completed successfully.Running 'sudo make install' Please wait, this may take several minutes... Command completed successfully.Build complete.POST-BUILD COMMANDS ------------------- OKHPLIP UPDATE NOTIFICATION ------------------------- Do you want to check for HPLIP updates?. (y=yes*, n=no) : RESTART OR RE-PLUG IS REQUIRED ------------------------------ If you are installing a USB connected printer, and the printer was plugged in when you started this installer, you will need to either restart your PC or unplug and re-plug in your printer (USB cable only). If you choose to restart, run this command after restarting: hp-setup (Note: If you are using a parallel connection, you will have to restart your PC. If you are using network/wireless, you can ignore and continue). Restart or re-plug in your printer (r=restart, p=re-plug in*, i=ignore/continue, q=quit) : Please unplug and re-plugin your printer now. Press <enter> to continue or 'q' to quit: PRINTER SETUP ------------- Would you like to setup a printer now (y=yes*, n=no, q=quit) ? y Please make sure your printer is connected and powered on at this time. Do you want to setup printer in GUI mode? (u=GUI mode*, i=Interactive mode) : i Running 'hp-setup -i' command....HP Linux Imaging and Printing System (ver. 3.19.12) Printer/Fax Setup Utility ver. 9.0Copyright (c) 2001-18 HP Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details.(Note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.)-------------------------------- | SELECT CONNECTION (I/O) TYPE | --------------------------------Num Connection Description Type -------- ---------- ----------------------------------------------------------0* usb Universal Serial Bus (USB) 1 net Network/Ethernet/Wireless (direct connection or JetDirect)Enter number 0...1 for connection type (q=quit, enter=usb*) ? 1Using connection type: neterror: No device selected/specified or that supports this functionality. error: hp-setup failed. Please run hp-setup manually.RE-STARTING HP_SYSTRAY ---------------------- warning: hp-systray should not be run as root/superuser.HP Linux Imaging and Printing System (ver. 3.19.12) System Tray Status Service ver. 2.0Copyright (c) 2001-18 HP Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details.error: hp-systray cannot be run as root. Exiting.

可以打印了.

總結

以上是生活随笔為你收集整理的ubuntu 18.04 安装惠普打印机教程的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。