配置直連二層組網直接轉發

1. 拓?fù)鋱D：

2. 規劃：

配置項配置

AP管理VLAN	vlan100 &地址：10.0.100.0//24
STA業務VLAN	vlan1001 &地址：10.0.101.0//24
DHCP服務器	AC作為DHCP服務器為AP和STA分配IP地址
AP的IP地址池	10.0.100.2～10.0.100.254/24
STA的IP地址池	10.0.101.3～10.0.101.254/24
AP組	名稱：f100-ap &引用模板：VAP模板、域管理模板
域管理模板	名稱：f100 &國家碼：中國
SSID模板	名稱：f100-ssid &SSID名稱：f100-ssid
安全模板	名稱：f100-security &安全策略：WPA-WPA2+PSK+AES &密碼：a1234567
VAP模板	名稱：f100-vap &轉發模式：直接轉發 &業務vlan：vlan101 &引用模板：ssid模板，安全模板

3.配置思路

4. 配置步驟：

1.基礎配置：

• 配置接入交換機Switch的GE0/0/1和GE0/0/2接口加入VLAN100和VLAN101，GE0/0/1的缺省VLAN為VLAN100。

<HUAWEI> system-view [HUAWEI] sysname Switch [Switch] vlan batch 100 101 [Switch] interface gigabitethernet 0/0/1 [Switch-GigabitEthernet0/0/1] port link-type trunk [Switch-GigabitEthernet0/0/1] port trunk pvid vlan 100 [Switch-GigabitEthernet0/0/1] port trunk allow-pass vlan 100 101 [Switch-GigabitEthernet0/0/1] port-isolate enable [Switch-GigabitEthernet0/0/1] quit [Switch] interface gigabitethernet 0/0/2 [Switch-GigabitEthernet0/0/2] port link-type trunk [Switch-GigabitEthernet0/0/2] port trunk allow-pass vlan 100 101 [Switch-GigabitEthernet0/0/2] quit

2.配置AC與Switch設備互通

• # 配置AC的接口GE0/0/1加入VLAN100和VLAN101。

<AC6605> system-view [AC6605] sysname AC [AC] vlan batch 100 101 [AC] interface gigabitethernet 0/0/1 [AC-GigabitEthernet0/0/1] port link-type trunk [AC-GigabitEthernet0/0/1] port trunk allow-pass vlan 100 101 [AC-GigabitEthernet0/0/1] quit

3.配置DHCP服務器為STA和AP分配IP地址

• 在AC上配置VLANIF100接口為AP提供IP地址，配置VLANIF101接口為STA提供IP地址。

[AC] dhcp enable [AC] interface vlanif 100 [AC-Vlanif100] ip address 10.0.100.1 24 [AC-Vlanif100] dhcp select interface [AC-Vlanif100] quit [AC] interface vlanif 101 [AC-Vlanif101] ip address 10.0.101.1 24 [AC-Vlanif101] dhcp select interface [AC-Vlanif101] quit

4.配置AP上線

• 創建AP組，用于將相同配置的AP都加入同一AP組中。

[AC] wlan [AC-wlan-view] ap-group name f100-ap [AC-wlan-ap-group-f100-ap] quit

• 創建域管理模板，在域管理模板下配置AC的國家碼并在AP組下引用域管理模板。

[AC-wlan-view] regulatory-domain-profile name f100 [AC-wlan-regulate-domain-f100] country-code cn [AC-wlan-regulate-domain-f100] quit [AC-wlan-view] ap-group name f100-ap [AC-wlan-ap-group-f100-ap] regulatory-domain-profile f100 Warning: Modifying the country code will clear channel, power and antenna gain configurations of the radio and reset the AP. Continu e?[Y/N]:y [AC-wlan-ap-group-f100-ap] quit [AC-wlan-view] quit

• 配置AC的源接口。

[AC] capwap source interface vlanif 100

• 在AC上離線導入AP，并將AP加入AP組“f100-ap”中。假設AP的MAC地址為60de-4476-e360，并將此AP命名為AP1。

[AC] wlan [AC-wlan-view] ap auth-mode mac-auth [AC-wlan-view] ap-id 0 ap-mac 60de-4476-e360 [AC-wlan-ap-0] ap-name AP1 Warning: This operation may cause AP reset. Continue? [Y/N]:y [AC-wlan-ap-0] ap-group f100-ap Warning: This operation may cause AP reset. If the country code changes, it will clear channel, power and antenna gain configuration s of the radio, Whether to continue? [Y/N]:y [AC-wlan-ap-0] quit

• 將AP上線后，當執行命令display ap all查看到AP的“State”字段為“nor”時，表示AP正常上線。

[AC-wlan-view] display ap all Total AP information: nor : normal [1] Extra information: P : insufficient power supply -------------------------------------------------------------------------------------------------- ID MAC Name Group IP Type State STA Uptime ExtraInfo -------------------------------------------------------------------------------------------------- 0 60de-4476-e360 AP1 f100-ap 10.0.100.254 AP5030DN nor 0 10S - -------------------------------------------------------------------------------------------------- Total: 1

5.配置WLAN業務參數

• 創建名為“f100-security”的安全模板，并配置安全策略。

[AC-wlan-view] security-profile name f100-security [AC-wlan-sec-prof-f100-security] security wpa-wpa2 psk pass-phrase a1234567 aes [AC-wlan-sec-prof-f100-security] quit

• 創建名為“f100-ssid”的SSID模板，并配置SSID名稱為“f100-ssid”。

[AC-wlan-view] ssid-profile name f100-ssid [AC-wlan-ssid-prof-f100-ssid] ssid f100-ssid [AC-wlan-ssid-prof-f100-ssid] quit

• 創建名為“f100-vap”的VAP模板，配置業務數據轉發模式、業務VLAN，并且引用安全模板和SSID模板。

[AC-wlan-view] vap-profile name f100-vap [AC-wlan-vap-prof-f100-vap] forward-mode direct-forward [AC-wlan-vap-prof-f100-vap] service-vlan vlan-id 101 [AC-wlan-vap-prof-f100-vap] security-profile f100-security [AC-wlan-vap-prof-f100-vap] ssid-profile f100-ssid [AC-wlan-vap-prof-f100-vap] quit

• 配置AP組引用VAP模板，AP上射頻0和射頻1都使用VAP模板“f100-vap”的配置。

[AC-wlan-view] ap-group name f100-ap [AC-wlan-ap-group-f100-ap] vap-profile f100-vap wlan 1 radio 0 [AC-wlan-ap-group-f100-ap] vap-profile f100-vap wlan 1 radio 1 [AC-wlan-ap-group-f100-ap] quit

總結

以上是生活随笔為你收集整理的华为wlan配置直连二层组网直接转发的全部?jī)?nèi)容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。