示例圖

一、實驗要求

1.配置WLAN二層直連直接轉發

二、注意事項

1.直接轉發：不經過CAPWAP隧道封裝，二發送數據 2.注意VLAN標簽的封裝與剝離，這是關鍵 3.參考華為 無線接入控制器(AC和FIT AP) V200R019C00 產品文檔 4.有什么錯誤，歡迎留言指正

三、基本配置

LSW2

sysname LSW2 # vlan batch 100 to 101 # interface GigabitEthernet0/0/1port link-type trunkport trunk pvid vlan 100port trunk allow-pass vlan 100 to 101 # interface GigabitEthernet0/0/2port link-type trunkport trunk allow-pass vlan 100 to 101 # return

AR1

sysname AR1 # interface GigabitEthernet0/0/1ip address 10.23.101.2 255.255.255.0 # return

AC1

sysname AC1 # vlan batch 100 to 101 # dhcp enable # interface Vlanif100ip address 10.23.100.1 255.255.255.0dhcp select interface # interface Vlanif101ip address 10.23.101.1 255.255.255.0dhcp select interfacedhcp server excluded-ip-address 10.23.101.2 # interface GigabitEthernet0/0/1port link-type trunkport trunk allow-pass vlan 100 to 101 # interface GigabitEthernet0/0/2port link-type trunkport trunk pvid vlan 101port trunk allow-pass vlan 101 # ip route-static 0.0.0.0 0.0.0.0 10.23.101.2 # capwap source interface vlanif100 # wlansecurity-profile name wlan-netsecurity wpa-wpa2 psk pass-phrase abc1234567 aesssid-profile name wlan-netssid wlan-netvap-profile name wlan-netservice-vlan vlan-id 101ssid-profile wlan-netsecurity-profile wlan-netap-group name ap-group1radio 0vap-profile wlan-net wlan 1radio 1vap-profile wlan-net wlan 1ap-id 0 type-id 56 ap-mac AP的MAC地址ap-name area_1ap-group ap-group1radio 0channel 20mhz 6radio 1channel 20mhz 149eirp 127provision-ap # return

總結

以上是生活随笔為你收集整理的WLAN配置二层直连直接转发的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。