控制節點配置文件

# # Sample DevStack local.conf. # # This sample file is intended to be used for your typical DevStack environment # that's running all of OpenStack on a single host. This can also be used as # the first host of a multi-host test environment. # # No changes to this sample configuration are required for this to work. #[[local|localrc]]DATABASE_PASSWORD=password RABBIT_PASSWORD=password SERVICE_PASSWORD=password SERVICE_TOKEN=password ADMIN_PASSWORD=password# The DevStack plugin defaults to using the ovn branch from the official ovs # repo. You can optionally use a different one. For example, you may want to # use the latest patches in blp's ovn branch: #OVN_REPO=https://github.com/blp/ovs-reviews.git #OVN_BRANCH=ovnenable_plugin networking-ovn https://git.openstack.org/openstack/networking-ovn enable_service ovn-northd enable_service ovn-controller enable_service networking-ovn-metadata-agent# Use Neutron instead of nova-network disable_service n-net enable_service q-svc# Disable Neutron agents not used with OVN. disable_service q-agt disable_service q-l3 disable_service q-dhcp disable_service q-meta# Horizon (the web UI) is enabled by default. You may want to disable # it here to speed up DevStack a bit. enable_service horizon #disable_service horizon# Cinder (OpenStack Block Storage) is disabled by default to speed up # DevStack a bit. You may enable it here if you would like to use it. disable_service cinder c-sch c-api c-vol #enable_service cinder c-sch c-api c-vol# How to connect to ovsdb-server hosting the OVN NB database. #OVN_NB_REMOTE=tcp:$SERVICE_HOST:6641# How to connect to ovsdb-server hosting the OVN SB database. #OVN_SB_REMOTE=tcp:$SERVICE_HOST:6642# A UUID to uniquely identify this system. If one is not specified, a random # one will be generated and saved in the file 'ovn-uuid' for re-use in future # DevStack runs. #OVN_UUID=# If using the OVN native layer-3 service, choose a router scheduler to # manage the distribution of router gateways on hypervisors/chassis. # Default value is leastloaded. #OVN_L3_SCHEDULER=leastloaded# Whether or not to build custom openvswitch kernel modules from the ovs git # tree. This is enabled by default. This is required unless your distro kernel # includes ovs+conntrack support. This support was first released in Linux 4.3, # and will likely be backported by some distros. #OVN_BUILD_MODULES=False# Enable services, these services depend on neutron plugin. #enable_plugin neutron https://git.openstack.org/openstack/neutron #enable_service q-qos #enable_service q-trunk# Skydive #enable_plugin skydive https://github.com/redhat-cip/skydive.git #enable_service skydive-analyzer #enable_service skydive-agent# If you want to enable a provider network instead of the default private # network after your DevStack environment installation, you *must* set # the Q_USE_PROVIDER_NETWORKING to True, and also give FIXED_RANGE, # NETWORK_GATEWAY and ALLOCATION_POOL option to the correct value that can # be used in your environment. Specifying Q_AGENT is needed to allow devstack # to run various "ip link set" and "ovs-vsctl" commands for the provider # network setup. #Q_AGENT=openvswitch #Q_USE_PROVIDER_NETWORKING=True #PHYSICAL_NETWORK=providernet #PROVIDER_NETWORK_TYPE=flat #PUBLIC_INTERFACE=<public interface> #OVS_PHYSICAL_BRIDGE=br-provider #PROVIDER_SUBNET_NAME=provider-subnet # use the following for IPv4 #IP_VERSION=4 #FIXED_RANGE=<CIDR for the Provider Network> #NETWORK_GATEWAY=<Provider Network Gateway> #ALLOCATION_POOL=<Provider Network Allocation Pool> # use the following for IPv4+IPv6 #IP_VERSION=4+6 #FIXED_RANGE=<CIDR for the Provider Network> #NETWORK_GATEWAY=<Provider Network Gateway> #ALLOCATION_POOL=<Provider Network Allocation Pool> # IPV6_PROVIDER_FIXED_RANGE=<v6 CDIR for the Provider Network> # IPV6_PROVIDER_NETWORK_GATEWAY=<v6 Gateway for the Provider Network># If you wish to use the provider network for public access to the cloud, # set the following #Q_USE_PROVIDERNET_FOR_PUBLIC=True #PUBLIC_NETWORK_NAME=<Provider network name> #PUBLIC_NETWORK_GATEWAY=<Provider network gateway> #PUBLIC_PHYSICAL_NETWORK=<Provider network name> #IP_VERSION=4 #PUBLIC_SUBNET_NAME=<provider subnet name> #Q_FLOATING_ALLOCATION_POOL=<Provider Network Allocation Pool> #FLOATING_RANGE=<CIDR for the Provider Network># NOTE: DO NOT MOVE THESE SECTIONS FROM THE END OF THIS FILE # IF YOU DO, THEY WON'T WORK!!!!! ## Enable Nova automatic host discovery for cell every 2 seconds # Only needed in case of multinode devstack, as otherwise there will be issues # when the 2nd compute node goes online. [[post-config|$NOVA_CONF]] [scheduler] discover_hosts_in_cells_interval = 2
計算節點

# # Sample DevStack local.conf. # # This sample file is intended to be used when adding an additional compute node # to your test environment. It runs a very minimal set of services. # # For this configuration to work, you *must* set the SERVICE_HOST option to the # IP address of the main DevStack host. You must also set HOST_IP to the IP # address of this host. #[[local|localrc]]DATABASE_PASSWORD=password RABBIT_PASSWORD=password SERVICE_PASSWORD=password SERVICE_TOKEN=password ADMIN_PASSWORD=password# The DevStack plugin defaults to using the ovn branch from the official ovs # repo. You can optionally use a different one. For example, you may want to # use the latest patches in blp's ovn branch: #OVN_REPO=https://github.com/blp/ovs-reviews.git #OVN_BRANCH=ovnenable_plugin networking-ovn https://git.openstack.org/openstack/networking-ovndisable_all_services enable_service n-cpu enable_service placement-api enable_service ovn-controller# Set this to the address of the main DevStack host running the rest of the # OpenStack services. SERVICE_HOST=<IP address of host running everything else> RABBIT_HOST=$SERVICE_HOST Q_HOST=$SERVICE_HOST# How to connect to ovsdb-server hosting the OVN SB database OVN_SB_REMOTE=tcp:$SERVICE_HOST:6642# A UUID to uniquely identify this system. If one is not specified, a random # one will be generated and saved in the file 'ovn-uuid' for re-use in future # DevStack runs. #OVN_UUID=# Whether or not to build custom openvswitch kernel modules from the ovs git # tree. This is enabled by default. This is required unless your distro kernel # includes ovs+conntrack support. This support was first released in Linux 4.3, # and will likely be backported by some distros. #OVN_BUILD_MODULES=FalseHOST_IP=<IP address of current host> NOVA_VNC_ENABLED=True NOVNCPROXY_URL=http://$SERVICE_HOST:6080/vnc_auto.html VNCSERVER_LISTEN=$HOST_IP VNCSERVER_PROXYCLIENT_ADDRESS=$VNCSERVER_LISTEN# Skydive #enable_plugin skydive https://github.com/redhat-cip/skydive.git #enable_service skydive-agent# Provider Network # If you want to enable a provider network instead of the default private # network after your DevStack environment installation, you *must* set the # Q_USE_PROVIDER_NETWORKING to True, and give value to both PHYSICAL_NETWORK # and OVS_PHYSICAL_BRIDGE. #Q_USE_PROVIDER_NETWORKING=True #PHYSICAL_NETWORK=providernet #OVS_PHYSICAL_BRIDGE=br-provider #PUBLIC_INTERFACE=<public interface>

總結

以上是生活随笔為你收集整理的devstack安装OpenStack Pike版本 (OVN+VLAN)的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。