靜態路由

• 靜態路由練習題
• 一、需求：
• 二、個人思路：
• 三、命令如下：
• • 1.LSW4
  • 2.LSW5
  • R6
  • R7

靜態路由練習題

一、需求：

要求全網互通

二、個人思路：

• 首先完成左側和右側的單臂路由
• 再實現路由間的直連
• 使用靜態路由手動添加IP地址

三、命令如下：

1.LSW4

The device is running!<Huawei>undo ter mo Info: Current terminal monitor is off. <Huawei>sys Enter system view, return user view with Ctrl+Z. [Huawei]vlan bat 10 to 40 #創建vlan 10 20 30 40 Info: This operation may take a few seconds. Please wait for a moment...done. [Huawei]int e0/0/1 [Huawei-Ethernet0/0/1]port link-type acc #用access模式連接PC1 [Huawei-Ethernet0/0/1]port default vlan 10 #把PC1分到vlan 10 內 [Huawei-Ethernet0/0/1]int e0/0/2 [Huawei-Ethernet0/0/2]port link-type acc [Huawei-Ethernet0/0/2]port default vlan 20 [Huawei-Ethernet0/0/2]int g0/0/1 [Huawei-GigabitEthernet0/0/1]port link-type trunk #用trunk模式連接路由器 [Huawei-GigabitEthernet0/0/1]port trunk all vlan all #允許所有vlan通過端口

2.LSW5

The device is running!<Huawei>undo ter mo Info: Current terminal monitor is off. <Huawei>sys Enter system view, return user view with Ctrl+Z. [Huawei]vlan bat 10 to 40 Info: This operation may take a few seconds. Please wait for a moment...done. [Huawei]int e0/0/1 [Huawei-Ethernet0/0/1]port link-type ac [Huawei-Ethernet0/0/1]port def vlan 30 [Huawei-Ethernet0/0/1]int e0/0/2 [Huawei-Ethernet0/0/2]port link-type ac [Huawei-Ethernet0/0/2]port def vlan 40 [Huawei-Ethernet0/0/2]int g0/0/1 [Huawei-GigabitEthernet0/0/1]port link-t trunk [Huawei-GigabitEthernet0/0/1]port trunk all vlan all

R6

The device is running!<Huawei>undo ter mo Info: Current terminal monitor is off. <Huawei>sys Enter system view, return user view with Ctrl+Z. [Huawei]int g0/0/0 [Huawei-GigabitEthernet0/0/0]undo shutdown Info: Interface GigabitEthernet0/0/0 is not shutdown. [Huawei-GigabitEthernet0/0/0]int g0/0/0.1 #建立子端口 [Huawei-GigabitEthernet0/0/0.1]vlan-type d 10 d #把vlan 10 劃分入子端口 [Huawei-GigabitEthernet0/0/0.1]ip add 192.168.10.1 24 #添加網關 [Huawei-GigabitEthernet0/0/0.1]int g0/0/0.2 [Huawei-GigabitEthernet0/0/0.2]vlan-type d 20 d [Huawei-GigabitEthernet0/0/0.2]ip add 192.168.20.1 24 [Huawei-GigabitEthernet0/0/0.2]q [Huawei]int g0/0/1 [Huawei-GigabitEthernet0/0/1]ip add 10.1.1.2 24 [Huawei-GigabitEthernet0/0/1]q [Huawei]ip route-static 192.168.30.0 24 10.1.1.3 #手動進行靜態路由配置 [Huawei]ip route-static 192.168.40.0 24 10.1.1.3

R7

The device is running!<Huawei>undo te mo Info: Current terminal monitor is off. <Huawei>sys Enter system view, return user view with Ctrl+Z. [Huawei]int g0/0/0 [Huawei-GigabitEthernet0/0/0]undo shutdown Info: Interface GigabitEthernet0/0/0 is not shutdown. [Huawei-GigabitEthernet0/0/0]int g0/0/0.1 [Huawei-GigabitEthernet0/0/0.1]vlan-t d 30 d [Huawei-GigabitEthernet0/0/0.1]ip add 192.168.30.1 24 [Huawei-GigabitEthernet0/0/0.1]int g0/0/0.2 [Huawei-GigabitEthernet0/0/0.2]vlan-t d 40 d [Huawei-GigabitEthernet0/0/0.2]ip add 192.168.40.1 24 [Huawei-GigabitEthernet0/0/0.2]q [Huawei]int g0/0/1 [Huawei-GigabitEthernet0/0/1]ip add 10.1.1.3 24 [Huawei-GigabitEthernet0/0/1]q [Huawei]ip route-static 192.168.10.0 24 10.1.1.2 [Huawei]ip route-static 192.168.20.0 24 10.1.1.2

對不住各位，通信結果忘記了，不過人格擔保能全網通信。

總結

以上是生活随笔為你收集整理的静态路由练习题一的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。