concepts in Turbulent Flow
?
?
?
Table of Contents
- 1. Concepts/Glossary
- 1.1. Turbulent eddy viscosity ,μt
- 1.2. Turbulent kinetic energy (TKE)
- 1.3. Kolmogorov length scale, η
- 1.4. turbulent length scale, ?
- 1.5. turbulent kinetic energy dissipation rate, ε
- 1.6. Turbulence intensity, I
1 Concepts/Glossary
eddy\[ \mathcal{P}= - <u_i u_j> \frac{ \partial <U_i> }{\partial x_j } \]
1.1 Turbulent eddy viscosity ,μt
- not a fluid property
analogy: molucular stress <-> turbulent stress
1.2 Turbulent kinetic energy (TKE)
TKE\[ k = \frac{1}{2} \left(\, \overline{(u')^2} + \overline{(v')^2} + \overline{(w')^2} \,\right) \]
\[ k=0.5<u_i u_i>= 0.5 < \mathbf{u} \cdot \mathbf{u}> \] (4.24, pope)
- physically, TKE is the mean kinetic energy per unit mass in the fluctuating velocity field (u').
- half the trace of the Reynolds stress tensor
1.3 Kolmogorov length scale, η
\[ \eta = (\frac{\nu^3}{\epsilon})^{1/4} \]
1.4 turbulent length scale, ?
integral length scaleFigure 1: Different length scales and ranges in turbulence energy cascade (Fig. 6.1 Pope)
k-ε model \[ \ell = C_\mu^{3/4} \, \frac{k^\frac{3}{2}}{\epsilon} \]
- \( C_\mu \) model constant
1.5 turbulent kinetic energy dissipation rate, ε
kinetic energy disspated by viscosity per unit mass unit time
1.6 Turbulence intensity, I
Ideally, you will have a good estimate of the turbulence intensity at the inlet boundary from external, measured data. For example, if you are simulating a wind-tunnel experiment, the turbulence intensity in the free stream is usually available from the tunnel characteristics. In modern low-turbulence wind tunnels, the free-stream turbulence intensity may be as low as 0.05%.
\[ I = u'_rms/ U \]
- u'rms : root-mean-square of the fluctuating velocity
< 1% low > 10% high
Created: 2019-02-27 Wed 18:18
Emacs 24.5.1 (Org mode 8.2.10)
Validate
轉載于:https://www.cnblogs.com/code-saturne/p/10445769.html
總結
以上是生活随笔為你收集整理的concepts in Turbulent Flow的全部內容,希望文章能夠幫你解決所遇到的問題。
- 上一篇: 达人评测 高通骁龙765g和骁龙888有
- 下一篇: 创业的Idea是怎样产生的?