在vc或mfc中显示IplImage的方法
平常使用Open CV時總是跳出一個個窗口,很難將項目進行系統集成,特別是在MFC等Windows環境中加載顯示Open CV中的IplImage圖像;
/****************************************
? 使用Open CVhighgui.h 中定義的CvvImage類,可以很好的實現Open CV和Windows MFC顯示接口;先介紹一下CvvImage類:
?由于CvvImage是在 highgui.h 頭文件中聲明的,因此如果您的程序中需要使用,則必須在開頭包含此頭文件
#include <highgui.h>
CvvImage對應CImage宏:
#define CImage CvvImage
/***************************************
特別注意:由于OpenCV 2.0以后的版本將CvvImage類從highgui.h文件中刪除了,故現已不能正常使用了
但可以使用以前老版本中的文件,故提取出CvvImage.h,與CvvImage.cpp供使用
使用時在用到的地方加入#include "CvvImage.h"即可
/***************************************
注意事項:
由于CImage太常見, 很容易造成沖突, 因此建議不要使用該宏(可以直接刪去此宏定義)。?
警告:參數中含有HDC(注:一種windows系統下定義的變量類型,用來描述設備描述表的句柄類型)類型的并不能保證移植到其他平臺,例如Show/DrawToHDC等。?
后文中的DC,即device context(設備環境),一般可以理解為windows操作系統為方便繪圖而抽象的”繪圖表面“,“往窗口上繪圖”,有時也被說成是“往窗口DC上繪圖”。?
CvvImage::Create
bool CvvImage::Create(int w, int h, int bpp, int origin);
創建一個圖像。 成功返回true, 失敗返回false。
w 圖像寬
h 圖像高
bpp 每個像素的bit數, 值等于像素深度乘以通道數
origin 0 - 頂—左結構, 1 - 底—左結構 (Windows bitmaps 風格)
例:// 創建一個400行600列的, IPL_DEPTH_8U類型的3通道圖像, 頂—左結構
CvvImage img;
bool flag = img.Create(600, 400, IPL_DEPTH_8U*3, 0);
if(!flag) ? ? printf("創建圖像失敗!");
?
CvvImage::CopyOf
void ?CvvImage::CopyOf(CvvImage& img, int desired_color);
void ?CvvImage::CopyOf(IplImage* img, int desired_color);
從img復制圖像到當前的對象中。
img 要復制的圖像。
desired_color 為復制后圖像的通道數, 復制后圖像的像素深度為8bit。
例:// 讀一個圖像,然后復制為1個3通道的彩色圖像
CvvImage img1, img2;
img1.Load("example.tiff");
img2.CopyOf(img1, 3);
CvvImage::Load
bool CvvImage::Load(const char* filename, int desired_color);
裝載一個圖像。
filename 圖像文件名稱。?
desired_color 圖像波段數, 和cvLoadImage類似。?
?
?
CvvImage::LoadRect
bool CvvImage::LoadRect(const char* filename, int desired_color, CvRect rect);
從圖像讀出一個區域。
filename 圖像名稱。?
desired_color 圖像波段數, 和cvLoadImage類似。?
rect 要讀取的圖像范圍。?
注 ? LoadRect是先用Load裝載一個圖像,然后再將rect設置為圖像的ROI區域,然后復制圖像得到,因此,如果一個圖像很大(例如幾百MB),即使想從中只讀幾個像素也是會失敗的。?
CvvImage::Save
bool CvvImage::Save(const char* filename);保存圖像。 和cvSaveImage相似。
CvvImage::Show
void CvvImage::Show(const char* window);顯示一個圖像。 和cvShowImage相似。
CvvImage::Show
void CvvImage::Show(HDC dc, int x, int y, int w, int h, int from_x, int from_y);
繪制圖像的部分到DC。 圖像沒有縮放。此函數僅在Windows下有效。
dc 設備描述符。?
x 局部圖像顯示在DC上,從DC上的第x列開始。?
y 局部圖像顯示在DC上,從DC上的第y列開始。?
(x,y)為局部圖像顯示在DC上的起始位置。?
w 局部圖像寬度。?
h 局部圖像高度。?
from_x 從圖像的第from_x列開始顯示。?
from_y 從圖像的第from_y行開始顯示。?
例:// 從圖像10行20列開始,顯示400行600列圖像到設備描述符的100行200列開始的位置
CvvImage img;
img.Load("example.tiff");
img.Show(hDC, 200, 100, 600, 400, 20, 10);
CvvImage::DrawToHDC
void CImage::DrawToHDC(HDC hDCDst, RECT* pDstRect);
繪制圖像的ROI區域到DC的pDstRect,如果圖像大小和pDstRect不一致,圖像會拉伸/壓縮。此函數僅在Windows下有效。
hDCDst 設備描述符。?
pDstRect 對應的設備描述符區域。?
例:
CvvImage img; img.Load("example.tiff"); CRect rect; rect.left = 100; rect.top = 200; rect.right = rect.left + 600; rect.bottom = rect.top + 400; img.DrawToHDC(hDC, &rect);?
CvvImage::Fill
void CvvImage::Fill(int color);
以color顏色填充圖像。
CvvImage類定義
?class CV_EXPORTS CvvImage?
{public:?
?CvvImage();?
?virtual ~CvvImage();?
?virtual bool Create( int width,int height,int bits_per_pixel,int image_origin=0 ); virtual bool Load( const char* filename, int desired_color = 1 );?
?virtual bool LoadRect( const char* filename,int desired_color, CvRect r );?
#ifdef WIN32?
?virtual bool LoadRect( const char* filename,int desired_color, RECT r ) { return LoadRect( filename, desired_color,cvRect( r.left, r.top, r.right - r.left, r.bottom - r.top )); }?
#endif ?
virtual bool Save( const char* filename ); ?
?virtual void CopyOf( CvvImage& image, int desired_color = -1 );?
?virtual void CopyOf( IplImage* img, int desired_color = -1 );?
?IplImage* GetImage() { return m_img; };?
?virtual void Destroy(void);?
int Width() { return !m_img ? 0 : !m_img->roi ? m_img->width : m_img->roi->width; };?
int Height() { return !m_img ? 0 : !m_img->roi ? m_img->height : m_img->roi->height;};?
int Bpp() { return m_img ? (m_img->depth & 255)*m_img->nChannels : 0; };?
virtual void Fill( int color );?
virtual void Show( const char* window ); #ifdef WIN32?
virtual void Show(HDC dc,int x,int y,int width,int height,int from_x = 0,int from_y = 0 ); virtual void DrawToHDC( HDC hDCDst, RECT* pDstRect ); #endif?
protected:?
?IplImage* m_img; };?
?有了上面對CvvImage類的介紹,可以很容易的在Windows窗口中顯示圖像了,下面是在MFC的CView窗口中?
中顯示IplImage圖像的函數代碼?
void CMyView::ShowIplImage(IplImage* img) { CDC* pDC = GetDC();HDC hDC= pDC->GetSafeHdc(); CRect rect; rect.SetRect(0 , 0 , img->width , img->height); CvvImage cimg; cimg.CopyOf(img); cimg.DrawToHDC(hDC,&rect); ReleaseDC(pDC);?
}?
?
void Cdialog_iplImageDlg::DrawPicToHDC(IplImage* iplimg , UINT ID){CDC *pDC = GetDlgItem(ID)->GetDC();HDC hDC= pDC->GetSafeHdc();CRect rect;GetDlgItem(ID)->GetClientRect(&rect);CvvImage cimg;?
?cimg.CopyOf(iplimg);cimg.DrawToHDC(hDC,&rect);ReleaseDC(pDC);}?
?
?
CvvImage類:
?
#pragma once
#ifndef CVVIMAGE_CLASS_DEF
#define CVVIMAGE_CLASS_DEF
#include "opencv2/highgui/highgui.hpp"
#include "opencv2/core/core.hpp"
#include "opencv2/imgproc/imgproc.hpp"
#include "opencv2/imgproc/imgproc_c.h"
class CvvImage
{
public:
CvvImage();
virtual ~CvvImage();
virtual bool Create( int width, int height, int bits_per_pixel, int image_origin = 0 );
virtual bool Load( const char* filename, int desired_color = 1 );
virtual bool LoadRect( const char* filename,
int desired_color, CvRect r );
#if defined WIN32 || defined _WIN32
virtual bool LoadRect( const char* filename,
int desired_color, RECT r )
{
return LoadRect( filename, desired_color,
cvRect( r.left, r.top, r.right - r.left, r.bottom - r.top ));
}
#endif
virtual bool Save( const char* filename );
virtual void CopyOf( CvvImage& image, int desired_color = -1 );
virtual void CopyOf( IplImage* img, int desired_color = -1 );
IplImage* GetImage() { return m_img; };
virtual void Destroy(void);
int Width() { return !m_img ? 0 : !m_img->roi ? m_img->width : m_img->roi->width; };
int Height() { return !m_img ? 0 : !m_img->roi ? m_img->height : m_img->roi->height;};
int Bpp() { return m_img ? (m_img->depth & 255)*m_img->nChannels : 0; };
virtual void Fill( int color );
virtual void Show( const char* window );
#if defined WIN32 || defined _WIN32
virtual void Show( HDC dc, int x, int y, int width, int height,
int from_x = 0, int from_y = 0 );
virtual void DrawToHDC( HDC hDCDst, RECT* pDstRect );
#endif
protected:
IplImage* m_img;
};
typedef CvvImage CvImage;
#endif
?
#include "StdAfx.h"
#include "CvvImage.h"
//
// Construction/Destruction
//
CV_INLINE RECT NormalizeRect( RECT r );
CV_INLINE RECT NormalizeRect( RECT r )
{
int t;
if( r.left > r.right )
{
t = r.left;
r.left = r.right;
r.right = t;
}
if( r.top > r.bottom )
{
t = r.top;
r.top = r.bottom;
r.bottom = t;
}
return r;
}
CV_INLINE CvRect RectToCvRect( RECT sr );
CV_INLINE CvRect RectToCvRect( RECT sr )
{
sr = NormalizeRect( sr );
return cvRect( sr.left, sr.top, sr.right - sr.left, sr.bottom - sr.top );
}
CV_INLINE RECT CvRectToRect( CvRect sr );
CV_INLINE RECT CvRectToRect( CvRect sr )
{
RECT dr;
dr.left = sr.x;
dr.top = sr.y;
dr.right = sr.x + sr.width;
dr.bottom = sr.y + sr.height;
return dr;
}
CV_INLINE IplROI RectToROI( RECT r );
CV_INLINE IplROI RectToROI( RECT r )
{
IplROI roi;
r = NormalizeRect( r );
roi.xOffset = r.left;
roi.yOffset = r.top;
roi.width = r.right - r.left;
roi.height = r.bottom - r.top;
roi.coi = 0;
return roi;
}
void FillBitmapInfo( BITMAPINFO* bmi, int width, int height, int bpp, int origin )
{
assert( bmi && width >= 0 && height >= 0 && (bpp == 8 || bpp == 24 || bpp == 32));
BITMAPINFOHEADER* bmih = &(bmi->bmiHeader);
memset( bmih, 0, sizeof(*bmih));
bmih->biSize = sizeof(BITMAPINFOHEADER);
bmih->biWidth = width;
bmih->biHeight = origin ? abs(height) : -abs(height);
bmih->biPlanes = 1;
bmih->biBitCount = (unsigned short)bpp;
bmih->biCompression = BI_RGB;
if( bpp == 8 )
{
RGBQUAD* palette = bmi->bmiColors;
int i;
for( i = 0; i < 256; i++ )
{
palette[i].rgbBlue = palette[i].rgbGreen = palette[i].rgbRed = (BYTE)i;
palette[i].rgbReserved = 0;
}
}
}
CvvImage::CvvImage()
{
m_img = 0;
}
void CvvImage::Destroy()
{
cvReleaseImage( &m_img );
}
CvvImage::~CvvImage()
{
Destroy();
}
bool CvvImage::Create( int w, int h, int bpp, int origin )
{
const unsigned max_img_size = 10000;
if( (bpp != 8 && bpp != 24 && bpp != 32) ||
(unsigned)w >= max_img_size || (unsigned)h >= max_img_size ||
(origin != IPL_ORIGIN_TL && origin != IPL_ORIGIN_BL))
{
assert(0); // most probably, it is a programming error
return false;
}
if( !m_img || Bpp() != bpp || m_img->width != w || m_img->height != h )
{
if( m_img && m_img->nSize == sizeof(IplImage))
Destroy();
m_img = cvCreateImage( cvSize( w, h ), IPL_DEPTH_8U, bpp/8 );
}
if( m_img )
m_img->origin = origin == 0 ? IPL_ORIGIN_TL : IPL_ORIGIN_BL;
return m_img != 0;
}
void CvvImage::CopyOf( CvvImage& image, int desired_color )
{
IplImage* img = image.GetImage();
if( img )
{
CopyOf( img, desired_color );
}
}
#define HG_IS_IMAGE(img) \
((img) != 0 && ((const IplImage*)(img))->nSize == sizeof(IplImage) && \
((IplImage*)img)->imageData != 0)
void CvvImage::CopyOf( IplImage* img, int desired_color )
{
if( HG_IS_IMAGE(img) )
{
int color = desired_color;
CvSize size = cvGetSize( img );
if( color < 0 )
color = img->nChannels > 1;
if( Create( size.width, size.height,
(!color ? 1 : img->nChannels > 1 ? img->nChannels : 3)*8,
img->origin ))
{
cvConvertImage( img, m_img, 0 );
}
}
}
bool CvvImage::Load( const char* filename, int desired_color )
{
IplImage* img = cvLoadImage( filename, desired_color );
if( !img )
return false;
CopyOf( img, desired_color );
cvReleaseImage( &img );
return true;
}
bool CvvImage::LoadRect( const char* filename,
int desired_color, CvRect r )
{
if( r.width < 0 || r.height < 0 ) return false;
IplImage* img = cvLoadImage( filename, desired_color );
if( !img )
return false;
if( r.width == 0 || r.height == 0 )
{
r.width = img->width;
r.height = img->height;
r.x = r.y = 0;
}
if( r.x > img->width || r.y > img->height ||
r.x + r.width < 0 || r.y + r.height < 0 )
{
cvReleaseImage( &img );
return false;
}
if( r.x < 0 )
{
r.width += r.x;
r.x = 0;
}
if( r.y < 0 )
{
r.height += r.y;
r.y = 0;
}
if( r.x + r.width > img->width )
r.width = img->width - r.x;
if( r.y + r.height > img->height )
r.height = img->height - r.y;
cvSetImageROI( img, r );
CopyOf( img, desired_color );
cvReleaseImage( &img );
return true;
}
bool CvvImage::Save( const char* filename )
{
if( !m_img )
return false;
cvSaveImage( filename, m_img );
return true;
}
void CvvImage::Show( const char* window )
{
if( m_img )
cvShowImage( window, m_img );
}
void CvvImage::Show( HDC dc, int x, int y, int w, int h, int from_x, int from_y )
{
if( m_img && m_img->depth == IPL_DEPTH_8U )
{
uchar buffer[sizeof(BITMAPINFOHEADER) + 1024];
BITMAPINFO* bmi = (BITMAPINFO*)buffer;
int bmp_w = m_img->width, bmp_h = m_img->height;
FillBitmapInfo( bmi, bmp_w, bmp_h, Bpp(), m_img->origin );
from_x = MIN( MAX( from_x, 0 ), bmp_w - 1 );
from_y = MIN( MAX( from_y, 0 ), bmp_h - 1 );
int sw = MAX( MIN( bmp_w - from_x, w ), 0 );
int sh = MAX( MIN( bmp_h - from_y, h ), 0 );
SetDIBitsToDevice(
dc, x, y, sw, sh, from_x, from_y, from_y, sh,
m_img->imageData + from_y*m_img->widthStep,
bmi, DIB_RGB_COLORS );
}
}
void CvvImage::DrawToHDC( HDC hDCDst, RECT* pDstRect )
{
if( pDstRect && m_img && m_img->depth == IPL_DEPTH_8U && m_img->imageData )
{
uchar buffer[sizeof(BITMAPINFOHEADER) + 1024];
BITMAPINFO* bmi = (BITMAPINFO*)buffer;
int bmp_w = m_img->width, bmp_h = m_img->height;
CvRect roi = cvGetImageROI( m_img );
CvRect dst = RectToCvRect( *pDstRect );
if( roi.width == dst.width && roi.height == dst.height )
{
Show( hDCDst, dst.x, dst.y, dst.width, dst.height, roi.x, roi.y );
return;
}
if( roi.width > dst.width )
{
SetStretchBltMode(
hDCDst, // handle to device context
HALFTONE );
}
else
{
SetStretchBltMode(
hDCDst, // handle to device context
COLORONCOLOR );
}
FillBitmapInfo( bmi, bmp_w, bmp_h, Bpp(), m_img->origin );
::StretchDIBits(
hDCDst,
dst.x, dst.y, dst.width, dst.height,
roi.x, roi.y, roi.width, roi.height,
m_img->imageData, bmi, DIB_RGB_COLORS, SRCCOPY );
}
}
void CvvImage::Fill( int color )
{
cvSet( m_img, cvScalar(color&255,(color>>8)&255,(color>>16)&255,(color>>24)&255) );
}
總結
以上是生活随笔為你收集整理的在vc或mfc中显示IplImage的方法的全部內容,希望文章能夠幫你解決所遇到的問題。
- 上一篇: 小波在图像视频压缩领域中的应用分析【转贴
- 下一篇: VC6.0下opencv1.0的环境配置